Pion WebRTC before 3.0.15 didn't properly tear down the DTLS Connection when certificate verification failed. The PeerConnectionState was set to failed, but a user could ignore that and continue to use the PeerConnection. )A WebRTC implementation shouldn't allow the user to continue if verification has failed.)

In FreeBSD 13.0-STABLE before n245764-876ffe28796c, 12.2-STABLE before r369857, 13.0-RELEASE before p1, and 12.2-RELEASE before p7, a system call triggering a fault could cause SMAP protections to be disabled for the duration of the system call. This weakness could be combined with other kernel bugs to craft an exploit.

When using ConfigurableInternodeAuthHadoopPlugin for authentication, Apache Solr versions prior to 8.8.2 would forward/proxy distributed requests using server credentials instead of original client credentials. This would result in incorrect authorization resolution on the receiving hosts.

Improper Authorization vulnerability in Netop Vision Pro up to and including to 9.7.1 allows an attacker to replay network traffic.

On Arista Strata family products which have “TCAM profile” feature enabled when Port IPv4 access-list has a rule which matches on “vxlan” as protocol then that rule and subsequent rules ( rules declared after it in ACL ) do not match on IP protocol field as expected.

In JetBrains TeamCity before 2020.2.1, permissions during token removal were checked improperly.

An issue was discovered in Joomla! 3.0.0 through 3.9.24. Incorrect ACL checks could allow unauthorized change of the category for an article.

The Comments Like Dislike WordPress plugin before 1.1.4 allows users to like/dislike posted comments, however does not prevent them from replaying the AJAX request to add a like. This allows any user (even unauthenticated) to add unlimited like/dislike to any comment. The plugin appears to have some Restriction modes, such as Cookie Restriction, IP Restrictions, Logged In User Restriction, however, they do not prevent such attack as they only check client side

Incorrect Authorization vulnerability in WatchGuard Authentication Gateway (aka Single Sign-On Agent) on Windows allows an attacker with network access to execute restricted management commands. This issue affects Authentication Gateway: through 12.10.2.

NextAuth.js is a complete open source authentication solution for Next.js applications. `next-auth` users who are using the `EmailProvider` either in versions before `4.10.3` or `3.29.10` are affected. If an attacker could forge a request that sent a comma-separated list of emails (eg.: `attacker@attacker.com,victim@victim.com`) to the sign-in endpoint, NextAuth.js would send emails to both the attacker and the victim's e-mail addresses. The attacker could then login as a newly created user with the email being `attacker@attacker.com,victim@victim.com`. This means that basic authorization like `email.endsWith("@victim.com")` in the `signIn` callback would fail to communicate a threat to the developer and would let the attacker bypass authorization, even with an `@attacker.com` address. This vulnerability has been patched in `v4.10.3` and `v3.29.10` by normalizing the email value that is sent to the sign-in endpoint before accessing it anywhere else. We also added a `normalizeIdentifier` callback on the `EmailProvider` configuration, where you can further tweak your requirements for what your system considers a valid e-mail address. (E.g.: strict RFC2821 compliance). Users are advised to upgrade. There are no known workarounds for this vulnerability. If for some reason you cannot upgrade, you can normalize the incoming request using Advanced Initialization.

The issue was addressed by removing the relevant flags. This issue is fixed in watchOS 11.2, iOS 18.2 and iPadOS 18.2. A system binary could be used to fingerprint a user's Apple Account.

Incorrect access control in wms-Warehouse management system-zeqp v2.20.9.1 due to the token value of the zeqp system being reused.

An issue in OPEXUS FOIAXPRESS PUBLIC ACCESS LINK v11.1.0 allows attackers to bypass authentication via crafted web requests.

An issue in SWITCHBOT INC SwitchBot (com.theswitchbot.switchbot) 5.0.4 allows a remote attacker to obtain sensitive information via the firmware update process.

An authentication issue was addressed with improved state management. This issue is fixed in macOS Sonoma 14.4, iOS 17.4 and iPadOS 17.4. Photos in the Hidden Photos Album may be viewed without authentication.

An issue in BURG-WCHTER KG de.burgwachter.keyapp.app 4.5.0 allows a remote attacker to obtain sensitve information via the firmware update process.

An issue in GIANT MANUFACTURING CO., LTD RideLink (tw.giant.ridelink) 2.0.7 allows a remote attacker to obtain sensitive information via the firmware update process.

An issue in C-CHIP (com.cchip.cchipamaota) v.1.2.8 allows a remote attacker to obtain sensitive information via the firmware update process.

In the module "PayPal Official" for PrestaShop 7+ releases prior to version 6.4.2 and for PrestaShop 1.6 releases prior to version 3.18.1, a malicious customer can confirm an order even if payment is finally declined by PayPal. A logical weakness during the capture of a payment in case of disabled webhooks can be exploited to create an accepted order. This could allow a threat actor to confirm an order with a fraudulent payment support. Versions 6.4.2 and 3.18.1 contain a patch for the issue. Additionally, users enable webhooks and check they are callable.

A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sequoia 15. A non-privileged user may be able to modify restricted network settings.

A vulnerability in Pantera CRM versions 401.152 and 402.072 allows unauthorized attackers to bypass IP-based access controls by manipulating the X-Forwarded-For header.

Incorrect access control in Sunbird DCIM dcTrack v9.1.2 allows attackers to create or update a ticket with a location which bypasses an RBAC check.

@keystone-6/core is a core package for Keystone 6, a content management system for Node.js. Starting with version 2.2.0 and prior to version 2.3.1, users who expected their `multiselect` fields to use the field-level access control - if configured - are vulnerable to their field-level access control not being used. List-level access control is not affected. Field-level access control for fields other than `multiselect` are not affected. Version 2.3.1 contains a fix for this issue. As a workaround, stop using the `multiselect` field.

An issue was discovered in GitLab-EE starting with version 13.3 before 17.1.7, 17.2 before 17.2.5, and 17.3 before 17.3.2 that would allow an attacker to modify an on-demand DAST scan without permissions and leak variables.

** UNSUPPORTED WHEN ASSIGNED ** Incorrect Authorization vulnerability in Apache Archiva: a vulnerability in Apache Archiva allows an unauthenticated attacker to modify account data, potentially leading to account takeover. This issue affects Apache Archiva: from 2.0.0. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in kishor-23 Food Waste Management System 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /admin/admin.php. The manipulation leads to improper authorization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-257056. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue in Mezzanine v6.0.0 allows attackers to bypass access controls via manipulating the Host header.

Hertzbeat is an open source, real-time monitoring system with custom-monitoring, high performance cluster, prometheus-like and agentless. Hertzbeat versions 1.20 and prior have a permission bypass vulnerability. System authentication can be bypassed and invoke interfaces without authorization. Version 1.2.1 contains a patch for this issue.

Improper authorization in aedes version <0.35.0 will publish a LWT in a channel when a client is not authorized.

Incorrect Authorization vulnerability in the protocol communication between the WatchGuard Authentication Gateway (aka Single Sign-On Agent) on Windows and the WatchGuard Single Sign-On Client on Windows and MacOS allows Authentication Bypass.This issue affects the Authentication Gateway: through 12.10.2; Windows Single Sign-On Client: through 12.7; MacOS Single Sign-On Client: through 12.5.4.

In lunary-ai/lunary version 1.0.1, a vulnerability exists where a user removed from an organization can still read, create, modify, and delete logs by re-using an old authorization token. The lunary web application communicates with the server using an 'Authorization' token in the browser, which does not properly invalidate upon the user's removal from the organization. This allows the removed user to perform unauthorized actions on logs and access project and external user details without valid permissions.

lunary-ai/lunary version 1.0.1 is vulnerable to improper authorization, allowing removed members to read, create, modify, and delete prompt templates using an old authorization token. Despite being removed from an organization, these members can still perform operations on prompt templates by sending HTTP requests with their previously captured authorization token. This issue exposes organizations to unauthorized access and manipulation of sensitive template data.

Dante 1.4.0 through 1.4.3 (fixed in 1.4.4) has incorrect access control for some sockd.conf configurations involving socksmethod.

The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.2, watchOS 11.2, visionOS 2.2, iOS 18.2 and iPadOS 18.2. Password autofill may fill in passwords after failing authentication.

An issue in Revic Optics Revic Ops (us.revic.revicops) 1.12.5 allows a remote attacker to obtain sensitive information via the firmware update process.

A permissions issue was addressed by removing vulnerable code and adding additional checks. This issue is fixed in iOS 18 and iPadOS 18. Password autofill may fill in passwords after failing authentication.

Incorrect credential validation in LemonLDAP::NG 2.18.x and 2.19.x before 2.19.2 allows attackers to bypass OAuth2 client authentication via an empty client_password parameter (client secret).

On affected Arista EOS platforms, if a VXLAN match rule exists in an IPv4 access-list that is applied to the ingress of an L2 or an L3 port/SVI, the VXLAN rule and subsequent ACL rules in that access list will ignore the specified IP protocol.

An Incorrect Access Control vulnerability was found in /admin/edit_room_controller.php in Kashipara Hotel Management System v1.0, which allows an unauthenticated attacker to edit the valid hotel room entries in the administrator section.

OpenFGA is an authorization/permission engine. OpenFGA v1.5.7 and v1.5.8 are vulnerable to authorization bypass when calling Check API with a model that uses `but not` and `from` expressions and a userset. Users should downgrade to v1.5.6 as soon as possible. This downgrade is backward compatible. As of time of publication, a patch is not available but OpenFGA's maintainers are planning a patch for inclusion in a future release.

The Stylish Price List WordPress plugin before 6.9.0 does not perform capability checks in its spl_upload_ser_img AJAX action (available to both unauthenticated and authenticated users), which could allow unauthenticated users to upload images.

When creating a user account, it was possible to verify the account without having access to the verification email link/secret in moodle before 3.10.2, 3.9.5, 3.8.8, 3.5.17.

controllers/admin.js in Total.js CMS 13 allows remote attackers to execute arbitrary code via a POST to the /admin/api/widgets/ URI. This can be exploited in conjunction with CVE-2019-15954.

qmail-verify as used in netqmail 1.06 is prone to a mail-address verification bypass vulnerability.

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.