An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. /mnt/mtd/boot.sh has 0777 permissions, allowing local users to control the commands executed at system start-up.

SaferVPN 4.2.5 for Windows suffers from a SYSTEM privilege escalation vulnerability in its "SaferVPN.Service" service. The "SaferVPN.Service" service executes "openvpn.exe" using OpenVPN config files located within the current user's %LOCALAPPDATA%\SaferVPN\OvpnConfig directory. An authenticated attacker may modify these configuration files to specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user.

WinWaste.NET version 1.0.6183.16475 has incorrect permissions, allowing a local unprivileged user to replace the executable with a malicious file that will be executed with "LocalSystem" privileges.

Improper directory permissions in Intel Solid State Drive Toolbox before 3.5.7 may allow an authenticated user to potentially enable escalation of privilege via local access.

An issue was discovered in CapMon Access Manager 5.4.1.1005. An unprivileged user can read the cal_whitelist table in the Custom App Launcher (CAL) database, and potentially gain privileges by placing a Trojan horse program at an app pathname.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to to gain privileges due to allowing modification of columns of existing tasks. IBM X-Force ID: 146369.

IBM Spectrum LSF 9.1.1 9.1.2, 9.1.3, and 10.1 could allow a local user to change their job user at job submission time due to improper file permission settings. IBM X-Force ID: 147439.

Seqrite End Point Security v7.4 has "Everyone: (F)" permission for %PROGRAMFILES%\Seqrite\Seqrite, which allows local users to gain privileges by replacing an executable file with a Trojan horse.

Improper directory permissions in installer for Intel(R) Media SDK before 2018 R2.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

Incorrect file permissions in Ivanti Connect Secure before version 22.6R2 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1 (Not Applicable to 9.1Rx) allow a local authenticated attacker to escalate their privileges.

A vulnerability has been identified in Xpedition Designer VX.2.10 (All versions < VX.2.10 Update 13), Xpedition Designer VX.2.11 (All versions < VX.2.11 Update 11), Xpedition Designer VX.2.12 (All versions < VX.2.12 Update 5), Xpedition Designer VX.2.13 (All versions < VX.2.13 Update 1). The affected application assigns improper access rights to the service executable. This could allow an authenticated local attacker to inject arbitrary code and escalate privileges.

Windows Container Manager Service Elevation of Privilege Vulnerability

drbd8 allows local users to bypass intended restrictions for certain actions via netlink packets, similar to CVE-2009-3725.

An issue was discovered in MalwareFox AntiMalware 2.74.0.150. Improper access control in zam32.sys and zam64.sys allows a non-privileged process to register itself with the driver by sending IOCTL 0x80002010 and then using IOCTL 0x8000204C to \\.\ZemanaAntiMalware to elevate privileges.

A vulnerability has been found in Heimdal PRO v2.2.190, but it is most likely also present in Heimdal FREE and Heimdal CORP. Faulty permissions on the directory "C:\ProgramData\Heimdal Security\Heimdal Agent" allow BUILTIN\Users to write new files to the directory. On startup, the process Heimdal.MonitorServices.exe running as SYSTEM will attempt to load version.dll from this directory. Placing a malicious version.dll in this directory will result in privilege escalation. NOTE: any affected Heimdal products are completely unrelated to the Heimdal vendor of a Kerberos 5 product on the h5l.org web site.

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, the BIG-IP Edge Client Component Installer Service does not use best practice while saving temporary files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

ZOLL Defibrillator Dashboard, v prior to 2.2,The affected products contain insecure filesystem permissions that could allow a lower privilege user to escalate privileges to an administrative level user.

A10 Thunder ADC Incorrect Permission Assignment Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of A10 Thunder ADC. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the installer. The issue results from incorrect permissions on a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-22754.

Improper directory permissions in the installer for the Intel Parallel Studio before 2019 Gold may allow authenticated users to potentially enable an escalation of privilege via local access.

Mesa Labs AmegaView Versions 3.0 and prior has insecure file permissions that could be exploited to escalate privileges on the device.

Improper file permissions in the installer for Intel VTune Amplifier 2018 Update 3 and before may allow unprivileged user to potentially gain privileged access via local access.

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 40734.

Local privilege vulnerability in Yandex Browser for Windows prior to 21.9.0.390 allows a local, low privileged, attacker to execute arbitary code with the SYSTEM privileges through manipulating files in directory with insecure permissions during Yandex Browser update process.

A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level to root. The attacker must authenticate with valid user credentials. The vulnerability is due to incorrect permissions of a system executable. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level to root. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

The Microsoft Windows Installer for Atlassian Fisheye and Crucible before version 4.6.1 allows local attackers to escalate privileges because of weak permissions on the installation directory.

Arbitrary Process Execution vulnerability in McAfee Total Protection (MTP) prior to 16.0.30 allows a local user to gain elevated privileges and execute arbitrary code bypassing MTP self-defense.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /persist/ which presents a potential issue.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /data/ which presents a potential issue.

In Total Defense Anti-virus 9.0.0.773, insecure access control for the directory %PROGRAMDATA%\TotalDefense\Consumer\ISS\9\bd\TDUpdate2\ used by AMRT.exe allows local attackers to hijack bdcore.dll, which leads to privilege escalation when the AMRT service loads the DLL.

Linux Guest VMs running on VMware Workstation (15.x before 15.5.2) and Fusion (11.x before 11.5.2) contain a local privilege escalation vulnerability due to improper file permissions in Cortado Thinprint. Local attackers with non-administrative access to a Linux guest VM with virtual printing enabled may exploit this issue to elevate their privileges to root on the same guest VM.

An issue was discovered on the ENTTEC Datagate MK2, Storm 24, Pixelator, and E-Streamer MK2 with firmware 70044_update_05032019-482. They replace secure and protected directory permissions (set as default by the underlying operating system) with highly insecure read, write, and execute directory permissions for all users. By default, /usr/local and all of its subdirectories should have permissions set to only allow non-privileged users to read and execute from the tree structure, and to deny users from creating or editing files in this location. The ENTTEC firmware startup script permits all users to read, write, and execute (rwxrwxrwx) from the /usr, /usr/local, /usr/local/dmxis, and /usr/local/bin/ directories.

This vulnerability allows local attackers to escalate privileges on vulnerable installations of ABB MicroSCADA 9.3 with FP 1-2-3. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the configuration of the access controls for the installed product files. The installation procedure leaves critical files open to manipulation by any authenticated user. An attacker can leverage this vulnerability to escalate privileges to SYSTEM. Was ZDI-CAN-5097.

Improper file permission in software installer for Intel(R) Smart Connect Technology for Intel(R) NUC may allow an authenticated user to potentially enable escalation of privilege via local access.

In Snapdragon (Automobile, Mobile, Wear) in version MSM8909W, MSM8996AU, SD 210/SD 212/SD 205, SD 430, SD 450, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 810, SD 820, SD 820A, SD 835, SD 845, SDA660, the com.qualcomm.embms is a vendor package deployed in the system image which has an inadequate permission level and allows any application installed from Play Store to request this permission at install-time. The system application interfaces with the Radio Interface Layer leading to potential access control issue.

ovirt-engine 3.2 running on Linux kernel 3.1 and newer creates certain files world-writeable due to an upstream kernel change which impacted how python's os.chmod() works when passed a mode of '-1'.

setup before version 2.11.4-1.fc28 in Fedora and Red Hat Enterprise Linux added /sbin/nologin and /usr/sbin/nologin to /etc/shells. This violates security assumptions made by pam_shells and some daemons which allow access based on a user's shell being listed in /etc/shells. Under some circumstances, users which had their shell changed to /sbin/nologin could still access the system.

Windscribe 1.81 creates a named pipe with a NULL DACL that allows Everyone users to gain privileges or cause a denial of service via \\.\pipe\WindscribeService.

Golden Frog VyprVPN 2.12.1.8015 for Windows suffers from a SYSTEM privilege escalation vulnerability through the "VyprVPN" service. This service establishes a NetNamedPipe endpoint that allows applications to connect and call publicly exposed methods. The "SetProperty" method allows an attacker to configure the "AdditionalOpenVpnParameters" property and control the OpenVPN command line. Using the OpenVPN "plugin" parameter, an attacker may specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user. This attack may be conducted using "VyprVPN Free" account credentials and the VyprVPN Desktop Client.

An improper access control vulnerability exists in Schneider Electric's U.motion Builder software versions 1.2.1 and prior in which an improper handling of the system configuration can allow an attacker to execute arbitrary code under the context of root.

Anaconda Anaconda3 (Anaconda Distribution) through 2021.11.0.0 and Miniconda3 through 4.11.0.0 can create a world-writable directory under %PROGRAMDATA% and place that directory into the system PATH environment variable. Thus, for example, local users can gain privileges by placing a Trojan horse file into that directory. (This problem can only happen in a non-default installation. The person who installs the product must specify that it is being installed for all users. Also, the person who installs the product must specify that the system PATH should be changed.

In Flatpak before 0.8.7, a third-party app repository could include malicious apps that contain files with inappropriate permissions, for example setuid or world-writable. The files are deployed with those permissions, which would let a local attacker run the setuid executable or write to the world-writable location. In the case of the "system helper" component, files deployed as part of the app are owned by root, so in the worst case they could be setuid root.

Weak Directory Permission Vulnerability in Microsoft Windows client in McAfee True Key (TK) 5.1.230.7 and earlier allows local users to execute arbitrary code via specially crafted malware.

The Xamarin.iOS update component on systems running macOS allows an attacker to run arbitrary code as root, aka "Xamarin.iOS Elevation Of Privilege Vulnerability."

Privilege escalation in file permissions in Intel Driver and Support Assistant before 3.5.0.1 may allow an authenticated user to potentially execute code as administrator via local access.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /systemrw/ which presents a potential security.

Privilege escalation in file permissions in Intel Computing Improvement Program before version 2.2.0.03942 may allow an authenticated user to potentially execute code as administrator via local access.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, improper access control can lead to device node and executable to be run from /firmware/ which presents a potential issue.

Permissions in the driver pack installers for Intel NVMe before version 4.0.0.1007 and Intel RSTe before version 4.7.0.2083 may allow an authenticated user to potentially escalate privilege via local access.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Exposing the hashed content in /etc/passwd may lead to security issue.

Improper permissions in the installer for the ITE Tech* Consumer Infrared Driver for Windows 10 versions before 5.4.3.0 may allow an authenticated user to potentially enable escalation of privilege via local access.