LiteCart before 2.1.2 allows remote attackers to cause a denial of service (memory consumption) via URIs that do not exist, because public_html/logs/not_found.log grows without bound, and is loaded into memory for each request.

wancms 1.0 through 5.0 allows remote attackers to cause a denial of service (resource consumption) via a checkcode (aka verification code) URI in which the values of font_size, width, and height are large numbers.

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior allow the creation of new connections to one or more IOAs, without closing them properly, which may cause a denial of service within the industrial process control channel.

In Moxa NPort 5210, 5230, and 5232 versions 2.9 build 17030709 and prior, the amount of resources requested by a malicious actor are not restricted, allowing for a denial-of-service condition.

PowerDNS Authoritative Server 3.3.0 up to 4.1.4 excluding 4.1.5 and 4.0.6, and PowerDNS Recursor 3.2 up to 4.1.4 excluding 4.1.5 and 4.0.9, are vulnerable to a memory leak while parsing malformed records that can lead to remote denial of service.

Pexip Infinity before 18 allows remote Denial of Service (XML parsing).

A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098.

Memcached version 1.5.5 contains an Insufficient Control of Network Message Volume (Network Amplification, CWE-406) vulnerability in the UDP support of the memcached server that can result in denial of service via network flood (traffic amplification of 1:50,000 has been reported by reliable sources). This attack appear to be exploitable via network connectivity to port 11211 UDP. This vulnerability appears to have been fixed in 1.5.6 due to the disabling of the UDP protocol by default.

A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918.

PowerDNS Authoritative Server 4.1.0 up to 4.1.4 inclusive and PowerDNS Recursor 4.0.0 up to 4.1.4 inclusive are vulnerable to a packet cache pollution via crafted query that can lead to denial of service.

PHPCMS 9 allows remote attackers to cause a denial of service (resource consumption) via large font_size, height, and width parameters in an api.php?op=checkcode request.

A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected software improperly manages memory resources for TCP connections to a targeted device. An attacker could exploit this vulnerability by establishing a high number of TCP connections to the data interface of an affected device via IPv4 or IPv6. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and result in a DoS condition. System recovery may require manual intervention. Cisco Bug IDs: CSCvf36610.

A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544.

Receipt of a specific MPLS packet may cause MPC7/8/9, PTX-FPC3 (FPC-P1, FPC-P2) line cards or PTX1K to crash and restart. By continuously sending specific MPLS packets, an attacker can repeatedly crash the line cards or PTX1K causing a sustained Denial of Service. Affected releases are Juniper Networks Junos OS with MPC7/8/9 or PTX-FPC3 (FPC-P1, FPC-P2) installed and PTX1K: 15.1F versions prior to 15.1F6-S10; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D46; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S4, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D70, 17.2X75-D90; 17.3 versions prior to 17.3R1-S4, 17.3R2, 17.4 versions prior to 17.4R1-S2, 17.4R2. Refer to KB25385 for more information about PFE line cards.

By specially crafting HTTP/2 requests, workers would be allocated 60 seconds longer than necessary, leading to worker exhaustion and a denial of service. Fixed in Apache HTTP Server 2.4.34 (Affected 2.4.18-2.4.30,2.4.33).

A vulnerability has been identified in SIMATIC S7-1200 (All versions), SIMATIC S7-1500 (All Versions < V2.6). An attacker could exhaust the available connection pool of an affected device by opening a sufficient number of connections to the device. Successful exploitation requires an attacker to be able to send packets to port 102/tcp of the affected device. No user interaction and no user privileges are required to exploit the vulnerability. The vulnerability, if exploited, could cause a Denial-of-Service condition impacting the availability of the system. At the time of advisory publication no public exploitation of this vulnerability was known.

A vulnerability in the Routing Protocols Daemon (RPD) with Juniper Extension Toolkit (JET) support can allow a network based unauthenticated attacker to cause a severe memory exhaustion condition on the device. This can have an adverse impact on the system performance and availability. This issue only affects devices with JET support running Junos OS 17.2R1 and subsequent releases. Other versions of Junos OS are unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3; 17.2X75 versions prior to 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R1-S5, 17.4R2; 18.1 versions prior to 18.1R2-S3, 18.1R3;

The read_packet function in knc (Kerberised NetCat) before 1.11-1 is vulnerable to denial of service (memory exhaustion) that can be exploited remotely without authentication, possibly affecting another services running on the targeted host.

A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a large number of TCP packets to a specific port on an affected device. A successful exploit could allow the attacker to exhaust system memory, which could cause the device to reload unexpectedly. No manual intervention is needed to recover the device after it has reloaded.

A vulnerability in MikroTik Version 6.38.5 could allow an unauthenticated remote attacker to exhaust all available CPU via a flood of UDP packets on port 500 (used for L2TP over IPsec), preventing the affected router from accepting new connections; all devices will be disconnected from the router and all logs removed automatically.

A Resource Exhaustion issue was discovered in Phoenix Contact GmbH mGuard firmware versions 8.3.0 to 8.4.2. An attacker may compromise the device's availability by performing multiple initial VPN requests.

The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions 1.0 to 1.34 is vulnerable to a denial-of-service attack by making more than 120 connections.

Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823.

The Apache HTTP Server, when accessed through a TCP connection with a large window size, allows remote attackers to cause a denial of service (network bandwidth consumption) via a Range header that specifies multiple copies of the same fragment. NOTE: the severity of this issue has been disputed by third parties, who state that the large window size required by the attack is not normally supported or configured by the server, or that a DDoS-style attack would accomplish the same goal

Apache OpenMeetings 1.0.0 doesn't check contents of files being uploaded. An attacker can cause a denial of service by uploading multiple large files to the server.

The Traffic Router component of the incubating Apache Traffic Control project is vulnerable to a Slowloris style Denial of Service attack. TCP connections made on the configured DNS port will remain in the ESTABLISHED state until the client explicitly closes the connection or Traffic Router is restarted. If connections remain in the ESTABLISHED state indefinitely and accumulate in number to match the size of the thread pool dedicated to processing DNS requests, the thread pool becomes exhausted. Once the thread pool is exhausted, Traffic Router is unable to service any DNS request, regardless of transport protocol.

Sandstorm Cap'n Proto before 0.4.1.1 and 0.5.x before 0.5.1.2, when an application invokes the totalSize method on an object reader, allows remote peers to cause a denial of service (CPU consumption) via a crafted small message, which triggers a "tight" for loop. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-2312.

Sandstorm Cap'n Proto before 0.4.1.1 and 0.5.x before 0.5.1.1 allows remote peers to cause a denial of service (CPU and possibly general resource consumption) via a list with a large number of elements.

The skge driver 1.5 in Linux kernel 2.6.15 on Ubuntu does not properly use the spin_lock and spin_unlock functions, which allows remote attackers to cause a denial of service (machine crash) via a flood of network traffic.

Two four letter word commands "wchp/wchc" are CPU intensive and could cause spike of CPU utilization on Apache ZooKeeper server if abused, which leads to the server unable to serve legitimate client requests. Apache ZooKeeper thru version 3.4.9 and 3.5.2 suffer from this issue, fixed in 3.4.10, 3.5.3, and later.

When FW tries to get random mac address generated from new SW RNG and ADC values read are constant then DUT get struck in loop while trying to get random ADC samples in Snapdragon Mobile in version SD 210/SD 212/SD 205, SD 425, SD 430, SD 450, SD 625, SD 650/52

The VNC websocket frame decoder in QEMU allows remote attackers to cause a denial of service (memory and CPU consumption) via a large (1) websocket payload or (2) HTTP headers section.

libvirt version before 4.2.0-rc1 is vulnerable to a resource exhaustion as a result of an incomplete fix for CVE-2018-5748 that affects QEMU monitor but now also triggered via QEMU guest agent.

A vulnerability in MikroTik Version 6.41.4 could allow an unauthenticated remote attacker to exhaust all available CPU and all available RAM by sending a crafted FTP request on port 21 that begins with many '\0' characters, preventing the affected router from accepting new FTP connections. The router will reboot after 10 minutes, logging a "router was rebooted without proper shutdown" message.

A vulnerability in the Secure Sockets Layer (SSL) packet reassembly functionality of the detection engine in Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the detection engine to consume excessive system memory on an affected device, which could cause a denial of service (DoS) condition. The vulnerability is due to the affected software improperly handling changes to SSL connection states. An attacker could exploit this vulnerability by sending crafted SSL connections through an affected device. A successful exploit could allow the attacker to cause the detection engine to consume excessive system memory on the affected device, which could cause a DoS condition. The device may need to be reloaded manually to recover from this condition. This vulnerability affects Cisco Firepower System Software Releases 6.0.0 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Firewalls with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, Firepower 4100 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower 9300 Series Security Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower Threat Defense Virtual for VMware, Industrial Security Appliance 3000, Sourcefire 3D System Appliances. Cisco Bug IDs: CSCve23031.

YukiWiki 2.1.3 and earlier does not process a particular request properly that may allow consumption of large amounts of CPU and memory resources and may result in causing a denial of service condition.

A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132.

The png coder in ImageMagick allows remote attackers to cause a denial of service (crash).

Huawei USG9560/9520/9580 before V300R001C01SPC300 allows remote attackers to cause a memory leak or denial of service (memory exhaustion, reboot and MPU switchover) via a crafted website.

Memory leak in the ReadPSDLayers function in coders/psd.c in ImageMagick 6.8.9.9 allows remote attackers to cause a denial of service (memory consumption) via unspecified vectors.

disp+work 7400.12.21.30308 in SAP NetWeaver 7.40 allows remote attackers to cause a denial of service (resource consumption) via a crafted DIAG request, aka SAP Security Note 2405918.

The MikroTik Router hAP Lite 6.25 has no protection mechanism for unsolicited TCP ACK packets in the case of a fast network connection, which allows remote attackers to cause a denial of service (CPU consumption) by sending many ACK packets. After the attacker stops the exploit, the CPU usage is 100% and the router requires a reboot for normal operation.

A Junos device with VPLS routing-instances configured on one or more interfaces may be susceptible to an mbuf leak when processing a specific MPLS packet. Approximately 1 mbuf is leaked per each packet processed. The number of mbufs is platform dependent. The following command provides the number of mbufs that are currently in use and maximum number of mbufs that can be allocated on a platform: > show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs it will become inaccessible and a restart will be required. This issue only affects end devices, transit devices are not affected. Affected releases are Juniper Networks Junos OS with VPLS configured running: 12.1X46 versions prior to 12.1X46-D76; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F2-S19, 15.1F6-S10, 15.1R4-S9, 15.1R5-S7, 15.1R6-S4, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 15.1X53 versions prior to 15.1X53-D66 on QFX10; 16.1 versions prior to 16.1R3-S8, 16.1R4-S6, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S6, 17.1R3; 17.2 versions prior to 17.2R1-S5, 17.2R2.

An issue was discovered in certain Apple products. iOS before 10.3.3 is affected. watchOS before 3.2.3 is affected. The issue involves the "Messages" component. It allows remote attackers to cause a denial of service (memory consumption and application crash).

Mitsubishi MELSEC iQ-R Series PLCs with firmware 49 allow an unauthenticated attacker to halt the industrial process by sending a crafted packet over the network. This denial of service attack exposes Improper Input Validation. After halting, physical access to the PLC is required in order to restore production, and the device state is lost. This is related to R04CPU, RJ71GF11-T2, R04CPU, and RJ71GF11-T2.

A vulnerability in the network stack of MikroTik Version 6.38.5 released 2017-03-09 could allow an unauthenticated remote attacker to exhaust all available CPU via a flood of TCP RST packets, preventing the affected router from accepting new TCP connections.

BackBox Linux 4.6 allows remote attackers to cause a denial of service (ksoftirqd CPU consumption) via a flood of packets with Martian source IP addresses (as defined in RFC 1812 section 5.3.7). This product enables net.ipv4.conf.all.log_martians by default. NOTE: the vendor reports "It has been proved that this vulnerability has no foundation and it is totally fake and based on false assumptions.

An issue was discovered in certain Apple products. iOS before 11 is affected. macOS before 10.13 is affected. tvOS before 11 is affected. watchOS before 4 is affected. The issue involves the "libc" component. It allows remote attackers to cause a denial of service (resource consumption) via a crafted string that is mishandled by the glob function.