A vulnerability classified as critical was found in PHZ76 RtspServer 1.0.0. This vulnerability affects the function ParseRequestLine of the file RtspMesaage.cpp. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-248248. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

It was discovered that websockets.c in LibVNCServer prior to 0.9.12 did not properly decode certain WebSocket frames. A malicious attacker could exploit this by sending specially crafted WebSocket frames to a server, causing a heap-based buffer overflow.

There is a potential heap buffer overflow in Apache Hadoop libhdfs native code. Opening a file path provided by user without validation may result in a denial of service or arbitrary code execution. Users should upgrade to Apache Hadoop 2.10.2, 3.2.3, 3.3.2 or higher.

A buffer overflow issue was discovered in HMI3 Control Panel in Swisslog Healthcare Nexus Panel operated by released versions of software before Nexus Software 7.2.5.7. In the tcpTxThread function, the received data is copied to a stack buffer. An off-by-3 condition can occur, resulting in a stack-based buffer overflow.

Tenda AC Series Router AC18_V15.03.05.19(6318) was discovered to contain a heap overflow in the httpd module when handling /goform/saveParentControlInfo request.

An exploitable heap buffer overflow vulnerability exists in the X509 certificate parsing functionality of InsideSecure MatrixSSL 3.8.7b. A specially crafted x509 certificate can cause a buffer overflow on the heap resulting in remote code execution. To trigger this vulnerability, a specially crafted x509 certificate must be presented to the vulnerable client or server application when initiating secure connection.

Heap-based buffer overflow in the PCNET controller in QEMU allows remote attackers to execute arbitrary code by sending a packet with TXSTATUS_STARTPACKET set and then a crafted packet with TXSTATUS_DEVICEOWNS set.

Heap-based buffer overflow in PCRE 8.34 through 8.37 and PCRE2 10.10 allows remote attackers to execute arbitrary code via a crafted regular expression, as demonstrated by /^(?P=B)((?P=B)(?J:(?P<B>c)(?P<B>a(?P=B)))>WGXCREDITS)/, a different vulnerability than CVE-2015-8384.

libmysofa is vulnerable to Heap-based Buffer Overflow

Suricata before 5.0.8 and 6.x before 6.0.4 allows TCP evasion via a client with a crafted TCP/IP stack that can send a certain sequence of segments.

Tenda AC Series Router AC18_V15.03.05.19(6318) was discovered to contain a stack-based buffer overflow in the httpd module when handling /goform/SetFirewallCfg request.

Onlyoffice Document Server v6.0.0 and below and Core 6.1.0.26 and below were discovered to contain a stack overflow via the component DesktopEditor/common/File.cpp.

Stack-based Buffer Overflow vulnerability in cachekey plugin of Apache Traffic Server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

In UpdateLoadElement of ic.cc, there is a possible out-of-bounds write due to type confusion. This could lead to remote code execution in the proxy auto-config with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9 Android ID: A-117607414

A stack buffer overflow vulnerability has been reported to affect QNAP device running QUSBCam2. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QUSBCam2: QTS 4.5.4: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 5.0: QUSBCam2 2.0.1 ( 2021/08/03 ) and later QTS 4.3.6: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 4.3.3: QUSBCam2 1.1.4 ( 2021/08/06 ) and later QuTS hero 4.5.3: QUSBCam2 1.1.4 ( 2021/07/30 ) and later

idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.

There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.

There's a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.

A stack buffer overflow vulnerability has been reported to affect QNAP device running NVR Storage Expansion. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of NVR Storage Expansion: NVR Storage Expansion 1.0.6 ( 2021/08/03 ) and later

tsMuxer v2.6.16 was discovered to contain a heap-based buffer overflow via the function BitStreamReader::getCurVal in bitStream.h.

Five buffer overflows in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to initiate a denial-of-service attack and execute arbitrary code.

FATEK Automation WinProladder Versions 3.30 and prior are vulnerable to an out-of-bounds write, which may allow an attacker to execute arbitrary code.

Foxit Reader before 10.1.4 and PhantomPDF before 10.1.4 have an out-of-bounds write because the Cross-Reference table is mishandled during Office document conversion.

A stack-based buffer overflow on DrayTek Vigor2960, Vigor3900, and Vigor300B devices before 1.5.1.1 allows remote attackers to execute arbitrary code via the formuserphonenumber parameter in an authusersms action to mainfunction.cgi.

CODESYS Control Runtime system before 3.5.17.10 has a Heap-based Buffer Overflow.

An issue was discovered in Rockwell Automation Logix5000 Programmable Automation Controller FRN 16.00 through 21.00 (excluding all firmware versions prior to FRN 16.00, which are not affected). By sending malformed common industrial protocol (CIP) packet, an attacker may be able to overflow a stack-based buffer and execute code on the controller or initiate a nonrecoverable fault resulting in a denial of service.

tif_pixarlog.c in libtiff 4.0.6 has out-of-bounds write vulnerabilities in heap allocated buffers. Reported as MSVR 35094, aka "PixarLog horizontalDifference heap-buffer-overflow."

A vulnerability has been identified in RUGGEDCOM i800 (All versions < V4.3.7), RUGGEDCOM i801 (All versions < V4.3.7), RUGGEDCOM i802 (All versions < V4.3.7), RUGGEDCOM i803 (All versions < V4.3.7), RUGGEDCOM M2100 (All versions < V4.3.7), RUGGEDCOM M2200 (All versions < V4.3.7), RUGGEDCOM M969 (All versions < V4.3.7), RUGGEDCOM RMC30 (All versions < V4.3.7), RUGGEDCOM RMC8388 V4.X (All versions < V4.3.7), RUGGEDCOM RMC8388 V5.X (All versions < V5.5.4), RUGGEDCOM RP110 (All versions < V4.3.7), RUGGEDCOM RS1600 (All versions < V4.3.7), RUGGEDCOM RS1600F (All versions < V4.3.7), RUGGEDCOM RS1600T (All versions < V4.3.7), RUGGEDCOM RS400 (All versions < V4.3.7), RUGGEDCOM RS401 (All versions < V4.3.7), RUGGEDCOM RS416 (All versions < V4.3.7), RUGGEDCOM RS416P (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.5.4), RUGGEDCOM RS416v2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416v2 V5.X (All versions < 5.5.4), RUGGEDCOM RS8000 (All versions < V4.3.7), RUGGEDCOM RS8000A (All versions < V4.3.7), RUGGEDCOM RS8000H (All versions < V4.3.7), RUGGEDCOM RS8000T (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900G (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900GP (All versions < V4.3.7), RUGGEDCOM RS900L (All versions < V4.3.7), RUGGEDCOM RS900W (All versions < V4.3.7), RUGGEDCOM RS910 (All versions < V4.3.7), RUGGEDCOM RS910L (All versions < V4.3.7), RUGGEDCOM RS910W (All versions < V4.3.7), RUGGEDCOM RS920L (All versions < V4.3.7), RUGGEDCOM RS920W (All versions < V4.3.7), RUGGEDCOM RS930L (All versions < V4.3.7), RUGGEDCOM RS930W (All versions < V4.3.7), RUGGEDCOM RS940G (All versions < V4.3.7), RUGGEDCOM RS969 (All versions < V4.3.7), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2100P (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2100PNC (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100PNC (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2200 (All versions < V4.3.7), RUGGEDCOM RSG2288 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2288 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300P V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300P V5.X (All versions < V5.5.4), RUGGEDCOM RSG2488 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2488 V5.X (All versions < V5.5.4), RUGGEDCOM RSG907R (All versions < V5.5.4), RUGGEDCOM RSG908C (All versions < V5.5.4), RUGGEDCOM RSG909R (All versions < V5.5.4), RUGGEDCOM RSG910C (All versions < V5.5.4), RUGGEDCOM RSG920P V4.X (All versions < V4.3.7), RUGGEDCOM RSG920P V5.X (All versions < V5.5.4), RUGGEDCOM RSL910 (All versions < V5.5.4), RUGGEDCOM RST2228 (All versions < V5.5.4), RUGGEDCOM RST2228P (All versions < V5.5.4), RUGGEDCOM RST916C (All versions < V5.5.4), RUGGEDCOM RST916P (All versions < V5.5.4). The DHCP client in affected devices fails to properly sanitize incoming DHCP packets. This could allow an unauthenticated remote attacker to cause memory to be overwritten, potentially allowing remote code execution.

Tenda AC Series Router AC18_V15.03.05.19(6318) was discovered to contain a stack-based buffer overflow in the httpd module when handling /goform/SetClientState request.

An issue was discovered in prog.cgi on D-Link DIR-878 1.30B08 devices. Because strcat is misused, there is a stack-based buffer overflow that does not require authentication.

An issue was discovered in HCC embedded InterNiche 4.0.1. A potential heap buffer overflow exists in the code that parses the HTTP POST request, due to lack of size validation. This vulnerability requires the attacker to send a crafted HTTP POST request with a URI longer than 50 bytes. This leads to a heap overflow in wbs_post() via an strcpy() call.

In Xiaomi router R3600, ROM version<1.0.20, the connection service can be injected through the web interface, resulting in stack overflow or remote code execution.

An issue was discovered in Wind River VxWorks through 6.8. There is a possible stack overflow in dhcp server.

CODESYS V2 Web-Server before 1.1.9.20 has a Stack-based Buffer Overflow.

An issue was discovered in the stackvector crate through 2021-02-19 for Rust. There is an out-of-bounds write in StackVec::extend if size_hint provides certain anomalous data.

CODESYS V2 Web-Server before 1.1.9.20 has an Out-of-bounds Write.

There is a Heap-based buffer overflow vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may rewrite the memory of adjacent objects.

In the initDecoder function of SoftAVCDec, there is a possible out-of-bounds write to mCodecCtx due to a use after free when buffer allocation fails. This could lead to remote code execution as a privileged process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-66969281.

A stack-based buffer overflow in DMitry (Deepmagic Information Gathering Tool) 1.3a might allow remote WHOIS servers to execute arbitrary code via a long line in a response that is mishandled by nic_format_buff.

TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an unauthenticated user to execute arbitrary code by POSTing to apply_sec.cgi via the action ping_test with a sufficiently long ping_ipaddr key.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.

Softing Industrial Automation all versions prior to the latest build of version 4.47.0, The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute arbitrary code.

U.S. Air Force Sensor Data Management System extract75 has a buffer overflow that leads to code execution. An overflow in a global variable (sBuffer) leads to a Write-What-Where outcome. Writing beyond sBuffer will clobber most global variables until reaching a pointer such as DES_info or image_info. By controlling that pointer, one achieves an arbitrary write when its fields are assigned. The data written is from a potentially untrusted NITF file in the form of an integer. The attacker can gain control of the instruction pointer.

Morita Shogi 64 through 2020-05-02 for Nintendo 64 devices allows remote attackers to execute arbitrary code via crafted packet data to the built-in modem because 0x800b3e94 (aka the IF subcommand to top-level command 7) has a stack-based buffer overflow.

thttpd 2007 has buffer underflow.

A stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and later) for ARM CPU NAS (32bit OS) and x86 CPU NAS (32bit OS)

Addressed multiple stack buffer overflow vulnerabilities that could allow an attacker to carry out escalation of privileges through unauthorized remote code execution in Western Digital My Cloud devices before 5.04.114.

Buffer overflow in Zephyr USB DFU DNLOAD. Zephyr versions >= v2.5.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-c3gr-hgvr-f363

In Morgan Stanley Hobbes through 2020-05-21, the array implementation lacks bounds checking, allowing exploitation of an out-of-bounds (OOB) read/write vulnerability that leads to both local and remote code (via RPC) execution.

A heap overflow vulnerability exists in the way the GIF parser decodes LZW compressed streams in Accusoft ImageGear 19.8. A specially crafted malformed file can trigger a heap overflow, which can result in arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.