Endress+Hauser Ecograph T (Neutral/Private Label) (RSG35, ORSG35) and Memograph M (Neutral/Private Label) (RSG45, ORSG45) with Firmware version V2.0.0 and above is prone to exposure of sensitive information to an unauthorized actor. The firmware release has a dynamic token for each request submitted to the server, which makes repeating requests and analysis complex enough. Nevertheless, it's possible and during the analysis it was discovered that it also has an issue with the access-control matrix on the server-side. It was found that a user with low rights can get information from endpoints that should not be available to this user.

IBM Cognos Controller 10.2.0, 10.2.1, 10.3.0, 10.3.1, and 10.4.0 could allow a remote attacker to obtain sensitive information, caused by a flaw in the HTTP OPTIONS method, aka Optionsbleed. By sending an OPTIONS HTTP request, a remote attacker could exploit this vulnerability to read secret data from process memory and obtain sensitive information. IBM X-Force ID: 158878.

When running Tower before 3.4.3 on OpenShift or Kubernetes, application credentials are exposed to playbook job runs via environment variables. A malicious user with the ability to write playbooks could use this to gain administrative privileges.

An issue was discovered in Octopus before 3.17.7. When the special Guest user account is granted the CertificateExportPrivateKey permission, and Guest Access is enabled for the Octopus Server, an attacker can sign in as the Guest account and export Certificates managed by Octopus, including the private key.

The embedded web server on ABB Fox515T 1.0 devices is vulnerable to Local File Inclusion. It accepts a parameter that specifies a file for display or for use as a template. The filename is not validated; an attacker could retrieve any file.

Multiple IBM Rational products could disclose sensitive information by an attacker that intercepts vulnerable requests. IBM X-Force ID: 131758.

The administrative interface for Django 1.3.x before 1.3.6, 1.4.x before 1.4.4, and 1.5 before release candidate 2 does not check permissions for the history view, which allows remote authenticated administrators to obtain sensitive object history information.

File Disclosure in SMF (SimpleMachines Forum) <= 2.0.3: Forum admin can read files such as the database config.

Apperta Foundation OpenEyes 3.5.1 allows remote attackers to view the sensitive information of patients without having the intended level of privilege. Despite OpenEyes returning a Forbidden error message, the contents of a patient's profile are still returned in the server response. This response can be read in an intercepting proxy or by viewing the page source. Sensitive information returned in responses includes patient PII and medication records or history.

store/swift.py in OpenStack Glance Essex (2012.1), Folsom (2012.2) before 2012.2.3, and Grizzly, when in Swift single tenant mode, logs the Swift endpoint's user name and password in cleartext when the endpoint is misconfigured or unusable, allows remote authenticated users to obtain sensitive information by reading the error messages.

Huawei DP300 V500R002C00; V500R002C00B010; V500R002C00B011; V500R002C00B012; V500R002C00B013; V500R002C00B014; V500R002C00B017; V500R002C00B018; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC400; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; RP200 V500R002C00SPC200; V600R006C00; V600R006C00SPC200; V600R006C00SPC300; TE30 V100R001C10SPC300; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700B010; V500R002C00SPC200; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; V600R006C00SPC300; TE40 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; V600R006C00SPC300; TE50 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; V600R006C00SPC300; TE60 V100R001C10; V100R001C10B001; V100R001C10B002; V100R001C10B010; V100R001C10B011; V100R001C10B012; V100R001C10B013; V100R001C10B014; V100R001C10B016; V100R001C10B017; V100R001C10B018; V100R001C10B019; V100R001C10SPC400; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700; V100R001C10SPC800B011; V100R001C10SPC900; V500R002C00; V500R002C00B010; V500R002C00B011; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; V500R002C00SPCb00; V500R002C00SPCd00; V500R002C00SPCe00; V600R006C00; V600R006C00SPC100; V600R006C00SPC200; V600R006C00SPC300 use the CIDAM protocol, which contains sensitive information in the message when it is implemented. So these products has an information disclosure vulnerability. An authenticated remote attacker could track and get the message of a target system. Successful exploit could allow the attacker to get the information and cause the sensitive information disclosure.

VMware vCenter Server Appliance (vCSA) 5.0 before Update 2 does not properly parse XML documents, which allows remote authenticated users to read arbitrary files via unspecified vectors.

member/Orderinfo.asp in ASP4CMS AspCMS 2.7.2 allows remote authenticated users to read arbitrary order information via a modified OrderNo parameter.

This vulnerability allows remote attackers to disclose sensitive information on vulnerable installations of NetGain Systems Enterprise Manager 7.2.730 build 1034. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the org.apache.jsp.u.jsp.designer.script_005fsamples_jsp servlet, which listens on TCP port 8081 by default. When parsing the type parameter, the process does not properly validate a user-supplied path prior to using it in file operations. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of Administrator. Was ZDI-CAN-5119.

An Information Disclosure vulnerability exists in the my config file in NEtGEAR WGR614 v7 and v9, which could let a malicious user recover all previously used passwords on the device, for both the control panel and WEP/WPA/WPA2, in plaintext. This is a different issue than CVE-2012-6340.

IBM Security Identity Governance Virtual Appliance 5.2 through 5.2.3.2 generates an error message that includes sensitive information about its environment, users, or associated data. IBM X-Force ID: 127400.

The Database activity module in Moodle 2.1.x before 2.1.9, 2.2.x before 2.2.6, and 2.3.x before 2.3.3 allows remote authenticated users to read activity entries of a different group's users via an advanced search.

The Basic webmail module 6.x-1.x before 6.x-1.2 for Drupal allows remote authenticated users with the "access basic_webmail" permission to read arbitrary users' email addresses.

The Mandrill module 7.x-1.x before 7.x-1.2 for Drupal allows remote authenticated users to obtain password reset links by reading the logs in the Mandrill dashboard.

An Information Exposure issue was discovered in ProMinent MultiFLEX M10a Controller web interface. When an authenticated user uses the Change Password feature on the application, the current password for the user is specified in plaintext. This may allow an attacker who has been authenticated to gain access to the password.

McAfee Email and Web Security (EWS) 5.x before 5.5 Patch 6 and 5.6 before Patch 3, and McAfee Email Gateway (MEG) 7.0 before Patch 1, allows remote authenticated users to obtain the session tokens of arbitrary users by navigating within the Dashboard.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 could allow a remote attacker to obtain sensitive information caused by improper handling of Administrative Console panel fields. When exploited an attacker could browse the file system. IBM X-Force ID: 134933.

IBM Jazz Foundation products could allow an authenticated user to obtain sensitive information from a stack trace that could be used to aid future attacks. IBM X-Force ID: 129719.

RESTEasy allows remote authenticated users to obtain sensitive information by leveraging "insufficient use of random values" in async jobs.

MediaWiki before 1.18.5, and 1.19.x before 1.19.2 does not properly protect user block metadata, which allows remote administrators to read a user block reason via a reblock attempt.

A vulnerability was found in PlayTube 3.0.1 and classified as problematic. This issue affects some unknown processing of the component Redirect Handler. The manipulation leads to information disclosure. The attack may be initiated remotely. The identifier VDB-238577 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

PhpFastCache is a high-performance backend cache system (packagist package phpfastcache/phpfastcache). In versions before 6.1.5, 7.1.2, and 8.0.7 the `phpinfo()` can be exposed if the `/vendor` is not protected from public access. This is a rare situation today since the vendor directory is often located outside the web directory or protected via server rule (.htaccess, etc). Only the v6, v7 and v8 will be patched respectively in 8.0.7, 7.1.2, 6.1.5. Older versions such as v5, v4 are not longer supported and will **NOT** be patched. As a workaround, protect the `/vendor` directory from public access.

Directory traversal vulnerability in IBM Security Privileged Identity Manager (ISPIM) Virtual Appliance 2.x before 2.0.2 FP8 allows remote authenticated users to read arbitrary files via a .. (dot dot) in a URL.

Unspecified vulnerability in the Oracle FLEXCUBE Universal Banking component in Oracle Financial Services Applications 11.3.0, 11.4.0, and 12.0.1 allows remote authenticated users to affect confidentiality via vectors related to INFRA.

Puppet before 2.6.17 and 2.7.x before 2.7.18, and Puppet Enterprise before 2.5.2, allows remote authenticated users to read arbitrary files on the puppet master server by leveraging an arbitrary user's certificate and private key in a GET request.

IBM WebSphere Commerce Enterprise, Professional, Express, and Developer 7.0 and 8.0 could allow an authenticated attacker to obtain information such as user personal data. IBM X-Force ID: 128622.

IBM Emptoris Contract Management 10.0 and 10.1 reveals detailed error messages in certain features that could cause an attacker to gain additional information to conduct further attacks. IBM X-Force ID: 116738.

HP Fortify Software Security Center 3.1, 3.3, 3.4, and 3.5 allows remote authenticated users to obtain sensitive information via unspecified vectors.

Unspecified vulnerability in the Oracle FLEXCUBE Universal Banking component in Oracle Financial Services Applications 11.3.0, 11.4.0, 12.0.1 and 12.0.3, 12.1.0, and 12.2.0 allows remote authenticated users to affect confidentiality via vectors related to INFRA, a different vulnerability than CVE-2016-5603.

Polycom SoundStation IP, VVX, and RealPresence Trio that are running software older than UCS 4.0.12, 5.4.5 rev AG, 5.4.7, 5.5.2, or 5.6.0 are affected by a vulnerability in their UCS web application. This vulnerability could allow an authenticated remote attacker to read a segment of the phone's memory which could contain an administrator's password or other sensitive information.

RSA Archer, versions prior to 6.6 P3 (6.6.0.3), contain an information disclosure vulnerability. Information relating to the backend database gets disclosed to low-privileged RSA Archer users' UI under certain error conditions.

An Information Disclosure vulnerability in Fortinet FortiClient for Windows 5.6.0 and below versions, FortiClient for Mac OSX 5.6.0 and below versions and FortiClient SSLVPN Client for Linux 4.4.2334 and below versions allows regular users to see each other's VPN authentication credentials due to improperly secured storage locations.

XML External Entity (XXE) vulnerability in sam/admin/vpe2/public/php/server.php in F5 BIG-IP 10.0.0 through 10.2.4 and 11.0.0 through 11.2.1 allows remote authenticated users to read arbitrary files via a crafted XML file.

Generated Support Bundles contains private S/MIME and PGP keys if containing folder is not hidden. This issue affects: OTRS AG ((OTRS)) Community Edition 6.0.x version 6.0.1 and later versions. OTRS AG OTRS 7.0.x version 7.0.28 and prior versions; 8.0.x version 8.0.15 and prior versions.

lilo-uuid-diskid causes lilo.conf to be world-readable in lilo 23.1.

A vulnerability was found in Dromara open-capacity-platform 2.0.1. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /actuator/heapdump of the component auth-server. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261367.

IBM Sterling B2B Integrator Standard Edition 5.2 allows a user to view sensitive information that belongs to another user. IBM X-Force ID: 128619.

A flaw was found in postgresql. A purpose-crafted query can read arbitrary bytes of server memory. In the default configuration, any authenticated database user can complete this attack at will. The attack does not require the ability to create objects. If server settings include max_worker_processes=0, the known versions of this attack are infeasible. However, undiscovered variants of the attack may be independent of that setting.

Moodle before 2.2.2: Overview report allows users to see hidden courses

A vulnerability in Cisco WebEx Event Center could allow an authenticated, remote attacker to view unlisted meeting information. The vulnerability is due to a design flaw in the product. An attacker could execute a query on an Event Center site to view scheduled meetings. A successful query would show both listed and unlisted meetings in the displayed information. An attacker could use this information to attend meetings that are not available for their attendance. Cisco Bug IDs: CSCvg33629.

A vulnerability classified as problematic has been found in Halulu simple-download-button-shortcode Plugin 1.0 on WordPress. Affected is an unknown function of the file simple-download-button_dl.php of the component Download Handler. The manipulation of the argument file leads to information disclosure. It is possible to launch the attack remotely. Upgrading to version 1.1 is able to address this issue. The patch is identified as e648a8706818297cf02a665ae0bae1c069dea5f1. It is recommended to upgrade the affected component. VDB-242190 is the identifier assigned to this vulnerability.

A vulnerability in the web-based management interface of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to access sensitive data on an affected system. This vulnerability exists because the application does not sufficiently protect sensitive data when responding to a specific API request. An attacker could exploit the vulnerability by sending a crafted HTTP request to the affected application. A successful exploit could allow the attacker to obtain sensitive information about the users of the application, including security questions and answers. To exploit this vulnerability an attacker would need valid Administrator credentials. Cisco expects to release software updates that address this vulnerability.

The Web Configuration tool in VMware vCenter Orchestrator (vCO) 4.0 before Update 4, 4.1 before Update 2, and 4.2 before Update 1 places the vCenter Server password in an HTML document, which allows remote authenticated administrators to obtain sensitive information by reading this document.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information. This vulnerability is due to improper enforcement of administrator privilege levels for low-value sensitive data. An attacker with read-only administrator access to the web-based management interface could exploit this vulnerability by browsing to the page that contains the sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system.

A flaw was found in Wildfly where insufficient RBAC restrictions may lead to expose metrics data. The highest threat from this vulnerability is to the confidentiality.