Centreon 19.10 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the server_ip field in JSON data in an api/internal.php?object=centreon_configuration_remote request.

An issue was discovered in EyesOfNetwork 5.3. An authenticated web user with sufficient privileges could abuse the AutoDiscovery module to run arbitrary OS commands via the /module/module_frame/index.php autodiscovery.php target field.

Command injection vulnerability in change password of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

An OS command injection vulnerability exists in the console infactory_wlan functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

The Admin web application in Kinetica 7.0.9.2.20191118151947 does not properly sanitise the input for the function getLogs. This lack of sanitisation could be exploited to allow an authenticated attacker to run remote code on the underlying operating system. The logFile parameter in the getLogs function was used as a variable in a command to read log files; however, due to poor input sanitisation, it was possible to bypass a replacement and break out of the command.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via export.cgi encKey parameter.

An OS command injection vulnerability exists in the console infactory_port functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.

Gocloud S2A_WL 4.2.7.16471, S2A 4.2.7.17278, S2A 4.3.0.15815, S2A 4.3.0.17193, S3A K2P MTK 4.2.7.16528, S3A 4.3.0.16572, and ISP3000 4.3.0.17190 devices allows remote attackers to execute arbitrary OS commands via shell metacharacters in a ping operation, as demonstrated by the cgi-bin/webui/admin/tools/app_ping/diag_ping/; substring.

An OS command injection vulnerability exists in the console factory functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter or bootmode parameter of a certain URL.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

USU Oracle Optimization before 5.17.5 allows authenticated DataCollection users to achieve agent root access because some common OS commands are blocked but (for example) an OS command for base64 decoding is not blocked. NOTE: this is not an Oracle Corporation product.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

Sage X3 System CHAINE Variable Script Command Injection. An authenticated user with developer access can pass OS commands via this variable used by the web application. Note, this developer configuration should not be deployed in production.

Command injection vulnerability in networking of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.

An issue was discovered in Galleon NTS-6002-GPS 4.14.103-Galleon-NTS-6002.V12 4. An authenticated attacker can perform command injection as root via shell metacharacters within the Network Tools section of the web-management interface. All three networking tools are affected (Ping, Traceroute, and DNS Lookup) and their respective input fields (ping_address, trace_address, nslookup_address).

MultiTech Conduit MTCDT-LVW2-24XX 1.4.17-ocea-13592 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Debug Options page and entering shell metacharacters in the interface JSON field of the ping function.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Poll Routes page and entering shell metacharacters in the Router IP Address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

A vulnerability in the configuration dashboard of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to execute arbitrary code. This vulnerability is due to insufficient sanitization of configuration entries. An attacker could exploit this vulnerability by logging in as a super admin and entering crafted input to configuration options on the CSPC configuration dashboard. A successful exploit could allow the attacker to execute remote code as root.

An OS Command Injection vulnerability in the endpoint_devicemap.php component of Fonality Trixbox Community Edition allows an attacker to execute commands on the underlying operating system as the "asterisk" user. Note that Trixbox Community Edition has been unsupported by the vendor since 2012. This issue affects: Fonality Trixbox Community Edition, versions 1.2.0 through 2.8.0.4. Versions 1.0 and 1.1 are unaffected.

Cayin CMS suffers from an authenticated OS semi-blind command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user through the 'NTP_Server_IP' HTTP POST parameter in system.cgi page. This issue affects several branches and versions of the CMS application, including CME-SE, CMS-60, CMS-40, CMS-20, and CMS version 8.2, 8.0, and 7.5.

The EasyCorp ZenTao Pro application suffers from an OS command injection vulnerability in its '/pro/repo-create.html' component. After authenticating to the ZenTao dashboard, attackers may construct and send arbitrary OS commands via the POST parameter 'path', and those commands will run in an elevated SYSTEM context on the underlying Windows operating system.

Hitron CHITA 7.2.2.0.3b6-CD devices contain a command injection vulnerability via the Device/DDNS ddnsUsername field.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Fetch URL page and entering shell metacharacters in the URL field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

Command injection vulnerability in CWP v0.9.8.1126 that allows normal users to run commands as the root user.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

Vulnerability in rconfig “date” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

Command injection vulnerability in ftpd in Synology Router Manager (SRM) before 1.1.7-6941-1 allows remote authenticated users to execute arbitrary OS commands via the (1) MKD or (2) RMD command.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Cacti 1.2.8 allows Remote Code Execution (by privileged users) via shell metacharacters in the Performance Boost Debug Log field of poller_automation.php. OS commands are executed when a new poller cycle begins. The attacker must be authenticated, and must have access to modify the Performance Settings of the product.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “check_vertica_upgrade” value for the “cpIp” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Improper neutralization of special elements used in an OS command in Nagios XI 5.7.3 allows a remote, authenticated admin user to execute operating system commands with the privileges of the apache user.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can execute commands as the root user by sending a crafted HTTP GET to the UCM's "Old" HTTPS API.

Vulnerability in rconfig “cert_utils” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

D-Link DCH-M225 1.05b01 and earlier devices allow remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the media renderer name.

IBM Spectrum Scale and IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 175419.

A user with administrative privileges in Distributed Data Systems WebHMI 4.1.1.7662 may send OS commands to execute on the host server.

NfSen before 1.3.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the customfmt parameter (aka the "Custom output format" field).

A vulnerability in SonicWall SMA100 appliance allow an authenticated management-user to perform OS command injection using HTTP POST parameters. This vulnerability affected SMA100 Appliance version 10.2.0.2-20sv and earlier.

Dell EMC Integrated Data Protection Appliance versions 2.0, 2.1, 2.2, 2.3, 2.4 contain a command injection vulnerability in the ACM component. A remote authenticated malicious user with root privileges could inject parameters in the ACM component APIs that could lead to manipulation of passwords and execution of malicious commands on ACM component.