A design flaw in all versions of Go-Ethereum allows an attacker node to send 5120 pending transactions of a high gas price from one account that all fully spend the full balance of the account to a victim Geth node, which can purge all of pending transactions in a victim node's memory pool and then occupy the memory pool to prevent new transactions from entering the pool, resulting in a denial of service (DoS).

A design flaw in Go-Ethereum 1.10.12 and older versions allows an attacker node to send 5120 future transactions with a high gas price in one message, which can purge all of pending transactions in a victim node's memory pool, causing a denial of service (DoS).

An exploitable unhandled exception vulnerability exists in multiple APIs of CPP-Ethereum JSON-RPC. Specially crafted JSON requests can cause an unhandled exception resulting in denial of service. An attacker can send malicious JSON to trigger this vulnerability.

Go-Ethereum v1.10.9 was discovered to contain an issue which allows attackers to cause a denial of service (DoS) via sending an excessive amount of messages to a node. This is caused by missing memory in the component /ethash/algorithm.go.

go-ethereum is the official Go implementation of the Ethereum protocol. In affected versions a consensus-vulnerability in go-ethereum (Geth) could cause a chain split, where vulnerable versions refuse to accept the canonical chain. Further details about the vulnerability will be disclosed at a later date. A patch is included in the upcoming `v1.10.8` release. No workaround are available.

Go Ethereum, or "Geth", is the official Golang implementation of the Ethereum protocol. In Geth before version 1.9.18, there is a Denial-of-service (crash) during block processing. This is fixed in 1.9.18.

Go Ethereum (aka geth) 1.8.19 allows attackers to cause a denial of service (memory consumption) by rewriting the length of a dynamic array in memory, and then writing data to a single memory location with a large index number, as demonstrated by use of "assembly { mstore }" followed by a "c[0xC800000] = 0xFF" assignment.

The GetBlockHeadersMsg handler in the LES protocol implementation in Go Ethereum (aka geth) before 1.8.11 may lead to an access violation because of an integer signedness error for the array index, which allows attackers to launch a Denial of Service attack by sending a packet with a -1 query.Skip value. The vulnerable remote node would be crashed by such an attack immediately, aka the EPoD (Ethereum Packet of Death) issue.

Go-Ethereum 1.10.9 nodes crash (denial of service) after receiving a serial of messages and cannot be recovered. They will crash with "runtime error: invalid memory address or nil pointer dereference" and arise a SEGV signal.

The counterToCSSValue function in CSSComputedStyleDeclaration.cpp in the Cascading Style Sheets (CSS) implementation in WebCore in WebKit before r82222, as used in Google Chrome before 11.0.696.43 and other products, does not properly handle access to the (1) counterIncrement and (2) counterReset attributes of CSSStyleDeclaration data provided by a getComputedStyle method call, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via crafted JavaScript code.

An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application's error handling path, where the gnutls_deinit function is called after detecting a handshake failure.

An issue was discovered in Bento4 version 06c39d9. A NULL pointer dereference exists in the AP4_DescriptorListWriter::Action component located in /Core/Ap4Descriptor.h. It allows an attacker to cause a denial of service (DOS).

A NULL pointer dereference flaw was found in the way LibVNCServer before 0.9.9 handled certain ClientCutText message. A remote attacker could use this flaw to crash the VNC server by sending a specially crafted ClientCutText message from a VNC client.

browser/worker_host/message_port_dispatcher.cc in Google Chrome before 8.0.552.224 and Chrome OS before 8.0.552.343 does not properly handle certain postMessage calls, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via crafted JavaScript code that creates a web worker.

A NULL pointer dereference in WLAvalancheService in Ivanti Avalanche 6.3.1 allows a remote unauthenticated attacker to crash the service, resulting in a DoS.

NULL Pointer Dereference allows attackers to cause a denial of service (or application crash). This only applies when lxml is used together with libxml2 2.9.10 through 2.9.14. libxml2 2.9.9 and earlier are not affected. It allows triggering crashes through forged input data, given a vulnerable code sequence in the application. The vulnerability is caused by the iterwalk function (also used by the canonicalize function). Such code shouldn't be in wide-spread use, given that parsing + iterwalk would usually be replaced with the more efficient iterparse function. However, an XML converter that serialises to C14N would also be vulnerable, for example, and there are legitimate use cases for this code sequence. If untrusted input is received (also remotely) and processed via iterwalk function, a crash can be triggered.

ldebug.c in Lua 5.4.0 attempts to access debug information via the line hook of a stripped function, leading to a NULL pointer dereference.

pdf2json v0.71 was discovered to contain a NULL pointer dereference in the component ObjectStream::getObject.

It was found in FreeBSD 8.0, 6.3 and 4.9, and OpenBSD 4.6 that a null pointer dereference in ftpd/popen.c may lead to remote denial of service of the ftpd service.

An issue was discovered in Bento4 version 06c39d9. A NULL pointer dereference exists in the AP4_Stz2Atom::GetSampleSize component located in /Core/Ap4Stz2Atom.cpp. It allows an attacker to cause a denial of service (DOS).

Softing edgeConnector Siemens OPC UA Server Null Pointer Dereference Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Softing edgeConnector Siemens. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of OPC client certificates. The issue results from dereferencing a NULL pointer. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-20508.

Libreswan 4.2 through 4.5 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a crafted IKEv1 packet because pluto/ikev1.c wrongly expects that a state object exists. This is fixed in 4.6.

Cisco Unified Personal Communicator 7.0 (1.13056) does not free allocated memory for received data and does not perform validation if memory allocation is successful, causing a remote denial of service condition.

Codesys Profinet in version V4.2.0.0 is prone to null pointer dereference that allows a denial of service (DoS) attack of an unauthenticated user via SNMP.

A NULL pointer dereference in the function TextPage::restoreState of pdf2xml v2.0 allows attackers to cause a denial of service (DoS).

A NULL pointer dereference in the main() function dhry_1.c of dhrystone 2.1 causes a denial of service (DoS).

NULL pointer dereference vulnerability in ZNC before 0.092 caused by traffic stats when there are unauthenticated connections.

The _ger_parse_control function in Red Hat Directory Server 8 and the 389 Directory Server allows attackers to cause a denial of service (NULL pointer dereference) via a crafted search query.

A vulnerability classified as problematic was found in OpenCV wechat_qrcode Module up to 4.7.0. Affected by this vulnerability is the function DecodedBitStreamParser::decodeByteSegment of the file qrcode/decoder/decoded_bit_stream_parser.cpp. The manipulation leads to null pointer dereference. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-228547.

Server or client applications that call the SSL_check_chain() function during or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a result of incorrect handling of the "signature_algorithms_cert" TLS extension. The crash occurs if an invalid or unrecognised signature algorithm is received from the peer. This could be exploited by a malicious peer in a Denial of Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this issue. This issue did not affect OpenSSL versions prior to 1.1.1d. Fixed in OpenSSL 1.1.1g (Affected 1.1.1d-1.1.1f).

FFmpeg 4.2 is affected by null pointer dereference passed as argument to libavformat/aviobuf.c, which could cause a Denial of Service.

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to cause the Junos OS kernel to crash. Continued receipt of this specifically crafted malicious MPLS packet will cause a sustained Denial of Service condition. This issue require it to be received on an interface configured to receive this type of traffic. Affected releases are Juniper Networks Junos OS: 12.1X46 versions above and including 12.1X46-D76 prior to 12.1X46-D81 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 12.3R12-S10; 12.3X48 versions above and including 12.3X48-D66 prior to 12.3X48-D75 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 14.1X53-D47 on EX2200/VC, EX3200, EX3300/VC, EX4200, EX4300, EX4550/VC, EX4600, EX6200, EX8200/VC (XRE), QFX3500, QFX3600, QFX5100; 14.1X53 versions above and including 14.1X53-D115 prior to 14.1X53-D130 on QFabric System; 15.1 versions above and including 15.1F6-S10; 15.1R4-S9; 15.1R6-S6; 15.1 versions above and including 15.1R7 prior to 15.1R7-S2; 15.1X49 versions above and including 15.1X49-D131 prior to 15.1X49-D150 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 15.1X53 versions above 15.1X53-D233 prior to 15.1X53-D235 on QFX5200/QFX5110; 15.1X53 versions up to and including 15.1X53-D471 prior to 15.1X53-D590 on NFX150, NFX250; 15.1X53-D67 on QFX10000 Series; 15.1X53-D59 on EX2300/EX3400; 16.1 versions above and including 16.1R3-S8; 16.1 versions above and including 16.1R4-S9 prior to 16.1R4-S12; 16.1 versions above and including 16.1R5-S4; 16.1 versions above and including 16.1R6-S3 prior to 16.1R6-S6; 16.1 versions above and including 16.1R7 prior to 16.1R7-S2; 16.2 versions above and including 16.2R1-S6; 16.2 versions above and including 16.2R2-S5 prior to 16.2R2-S7; 17.1R1-S7; 17.1 versions above and including 17.1R2-S7 prior to 17.1R2-S9; 17.2R1-S6; 17.2 versions above and including 17.2R2-S4 prior to 17.2R2-S6; 17.2X75 versions above and including 17.2X75-D100 prior to X17.2X75-D101, 17.2X75-D110; 17.3 versions above and including 17.3R1-S4 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.3 versions above and including 17.3R2-S2 prior to 17.3R2-S4 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.3R3 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.4 versions above and including 17.4R1-S3 prior to 17.4R1-S5 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.4R2 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.1 versions above and including 18.1R2 prior to 18.1R2-S3, 18.1R3 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.2 versions above and including 18.2R1 prior to 18.2R1-S2, 18.2R1-S3, 18.2R2 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.2X75 versions above and including 18.2X75-D5 prior to 18.2X75-D20.

libyara/lexer.l in YARA 3.5.0 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted rule that is mishandled in the yy_get_next_buffer function.

systemd-resolved through 233 allows remote attackers to cause a denial of service (daemon crash) via a crafted DNS response with an empty question section.

The FoFiType1C::convertToType0 function in FoFiType1C.cc in Poppler 0.59.0 has a NULL pointer dereference vulnerability because a data structure is not initialized, which allows an attacker to launch a denial of service attack.

The find_color_or_error function in gifsicle 1.92 contains a NULL pointer dereference.

A flaw was found in libssh versions before 0.8.9 and before 0.9.4 in the way it handled AES-CTR (or DES ciphers if enabled) ciphers. The server or client could crash when the connection hasn't been fully initialized and the system tries to cleanup the ciphers when closing the connection. The biggest threat from this vulnerability is system availability.

The multipart processor in ModSecurity before 2.5.9 allows remote attackers to cause a denial of service (crash) via a multipart form datapost request with a missing part header name, which triggers a NULL pointer dereference.

The nickcmp function in Irssi before 0.8.21 allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a message without a nick.

A segmentation violation in the Iec104_Deal_I function of IEC104 v1.0 allows attackers to cause a denial of service (DOS).

The dtls1_retrieve_buffered_fragment function in ssl/d1_both.c in OpenSSL before 1.0.0 Beta 2 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence DTLS handshake message, related to a "fragment bug."

A NULL-pointer deference issue was discovered in GNU_gama::set() in ellipsoid.h in Gama 2.04 which can lead to a denial of service (DOS) via segment faults caused by crafted inputs.

A segmentation violation in the Iec104_Deal_FirmUpdate function of IEC104 v1.0 allows attackers to cause a denial of service (DOS).

A vulnerability was found in Filseclab Twister Antivirus 8. It has been rated as critical. This issue affects the function 0x8011206B in the library fildds.sys of the component IoControlCode Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-223289 was assigned to this vulnerability.

In eager mode, TensorFlow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1 does not set the session state. Hence, calling `tf.raw_ops.GetSessionHandle` or `tf.raw_ops.GetSessionHandleV2` results in a null pointer dereference In linked snippet, in eager mode, `ctx->session_state()` returns `nullptr`. Since code immediately dereferences this, we get a segmentation fault. The issue is patched in commit 9a133d73ae4b4664d22bd1aa6d654fec13c52ee1, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `tf.raw_ops.Switch` operation takes as input a tensor and a boolean and outputs two tensors. Depending on the boolean value, one of the tensors is exactly the input tensor whereas the other one should be an empty tensor. However, the eager runtime traverses all tensors in the output. Since only one of the tensors is defined, the other one is `nullptr`, hence we are binding a reference to `nullptr`. This is undefined behavior and reported as an error if compiling with `-fsanitize=null`. In this case, this results in a segmentation fault The issue is patched in commit da8558533d925694483d2c136a9220d6d49d843c, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

In Tensorflow before versions 2.2.1 and 2.3.1, if a user passes an invalid argument to `dlpack.to_dlpack` the expected validations will cause variables to bind to `nullptr` while setting a `status` variable to the error condition. However, this `status` argument is not properly checked. Hence, code following these methods will bind references to null pointers. This is undefined behavior and reported as an error if compiling with `-fsanitize=null`. The issue is patched in commit 22e07fb204386768e5bcbea563641ea11f96ceb8 and is released in TensorFlow versions 2.2.1, or 2.3.1.

In GNOME Balsa before 2.6.0, a malicious server operator or man in the middle can trigger a NULL pointer dereference and client crash by sending a PREAUTH response to imap_mbox_connect in libbalsa/imap/imap-handle.c.

Appweb before 7.2.2 and 8.x before 8.1.0, when built with CGI support, mishandles an HTTP request with a Range header that lacks an exact range. This may result in a NULL pointer dereference and cause a denial of service.

An issue was discovered in LibVNCServer before 0.9.13. libvncclient/tls_openssl.c has a NULL pointer dereference.