An OS Command Injection vulnerability in the endpoint_devicemap.php component of Fonality Trixbox Community Edition allows an attacker to execute commands on the underlying operating system as the "asterisk" user. Note that Trixbox Community Edition has been unsupported by the vendor since 2012. This issue affects: Fonality Trixbox Community Edition, versions 1.2.0 through 2.8.0.4. Versions 1.0 and 1.1 are unaffected.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

Unraid Web Server ToggleState Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Unraid. Authentication is required to exploit this vulnerability. The specific flaw exists within ToggleState.php. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the www-data user. Was ZDI-CAN-30134.

Cacti 1.2.8 allows Remote Code Execution (by privileged users) via shell metacharacters in the Performance Boost Debug Log field of poller_automation.php. OS commands are executed when a new poller cycle begins. The attacker must be authenticated, and must have access to modify the Performance Settings of the product.

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Sage X3 System CHAINE Variable Script Command Injection. An authenticated user with developer access can pass OS commands via this variable used by the web application. Note, this developer configuration should not be deployed in production.

A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

MultiTech Conduit MTCDT-LVW2-24XX 1.4.17-ocea-13592 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Debug Options page and entering shell metacharacters in the interface JSON field of the ping function.

A vulnerability was detected in Tenda HG3 2.0. The impacted element is an unknown function of the file /boaform/formCountrystr. The manipulation of the argument countrystr results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via filename parameter.

Adtran SR400ac ping Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Adtran SR400ac routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the ping command, which is available over JSON-RPC. A crafted host parameter can trigger execution of a system call composed from a user-supplied string. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20525.

A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.

A vulnerability in the web-based UI of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware before 11.2(1) could allow an authenticated, remote attacker to perform a command injection and execute commands with the privileges of the web server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including arbitrary shell commands in a specific user input field. Cisco Bug IDs: CSCvi51426.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via import.cgi encKey parameter.

The Telus Wi-Fi Hub (PRV65B444A-S-TS) with firmware version 3.00.20 is affected by an authenticated command injection vulnerability in multiple parameters passed to tr69_cmd.cgi. A remote attacker connected to the router's LAN and authenticated with a super user account, or using a bypass authentication vulnerability like CVE-2021-20090 could leverage this issue to run commands or gain a shell as root on the target device.

A command injection was identified on Barco ClickShare Base Unit devices with CSM-1 firmware before 1.7.0.3 and CSC-1 firmware before 1.10.0.10. An attacker with access to the product's web API can exploit this vulnerability to completely compromise the vulnerable device.

PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices allow authenticated users to inject system commands through a modified POST request to a specific URL.

Centreon 19.10 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the server_ip field in JSON data in an api/internal.php?object=centreon_configuration_remote request.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

An issue was discovered in Rubrik 5.0.3-2296. An OS command injection vulnerability allows an authenticated attacker to remotely execute arbitrary code on Rubrik-managed systems.

TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n allow remote code execution with a single HTTP request by placing shell commands in a "host=" line within HTTP POST data.

The Admin web application in Kinetica 7.0.9.2.20191118151947 does not properly sanitise the input for the function getLogs. This lack of sanitisation could be exploited to allow an authenticated attacker to run remote code on the underlying operating system. The logFile parameter in the getLogs function was used as a variable in a command to read log files; however, due to poor input sanitisation, it was possible to bypass a replacement and break out of the command.

A vulnerability in the esc_listener.py script of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to execute arbitrary commands as the tomcat user on an affected system, aka an Authentication Request Processing Arbitrary Command Execution Vulnerability. More Information: CSCvc76642. Known Affected Releases: 2.2(9.76).

Dell EMC OpenManage Enterprise-Modular (OME-M) versions prior to 1.10.00 contain a command injection vulnerability. A remote authenticated malicious user with high privileges could potentially exploit the vulnerability to execute arbitrary shell commands on the affected system.

A command injection vulnerability was discovered on the Zyxel EMG2926 home router with firmware V1.00(AAQT.4)b8. The vulnerability is located in the diagnostic tools, specifically the nslookup function. A malicious user may exploit numerous vectors to execute arbitrary commands on the router, such as the ping_ip parameter to the expert/maintenance/diagnostic/nslookup URI.

A vulnerability in SonicWall SMA100 appliance allow an authenticated management-user to perform OS command injection using HTTP POST parameters. This vulnerability affected SMA100 Appliance version 10.2.0.2-20sv and earlier.

RSA Archer, versions prior to 6.7 P3 (6.7.0.3), contain a command injection vulnerability. AN authenticated malicious user with administrator privileges could potentially exploit this vulnerability to execute arbitrary commands on the system where the vulnerable application is deployed.

Dell EMC Integrated Data Protection Appliance versions 2.0, 2.1, 2.2, 2.3, 2.4 contain a command injection vulnerability in the ACM component. A remote authenticated malicious user with root privileges could inject parameters in the ACM component APIs that could lead to manipulation of passwords and execution of malicious commands on ACM component.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can execute commands as the root user by sending a crafted HTTP GET to the UCM's "Old" HTTPS API.

Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

Openshift has shell command injection flaws due to unsanitized data being passed into shell commands.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Diagnostics Ping page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

Improper neutralization of special elements used in an OS command in Nagios XI 5.7.3 allows a remote, authenticated admin user to execute operating system commands with the privileges of the apache user.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

Logstorage version 8.0.0 and earlier, and ELC Analytics version 3.0.0 and earlier allow remote attackers to execute arbitrary OS commands via a specially crafted log file.

McAfee Email Gateway 7.6 allows remote authenticated administrators to execute arbitrary commands via shell metacharacters in the value attribute in a (1) TestFile XML element or the (2) hostname. NOTE: this issue can be combined with CVE-2013-7092 to allow remote attackers to execute commands.

McAfee Email Gateway 7.6 allows remote authenticated administrators to execute arbitrary commands by specifying them in the value attribute in a (1) Command or (2) Script XML element. NOTE: this issue can be combined with CVE-2013-7092 to allow remote attackers to execute commands.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote attacker to execute arbitrary commands on the system in the context of root user, caused by improper validation of user-supplied input. IBM X-Force ID: 174966.

An exploitable vulnerability exists in the /api/CONFIG/restore functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request trigger this vulnerability.

Ruckus Wireless H500 web management interface authenticated command injection

The Billion 5200W-T TCLinux Fw $7.3.8.0 v008 130603 router distributed by TrueOnline has a command injection vulnerability in the Time Setting function, which is only accessible by an authenticated user. The vulnerability is in the tools_time.asp page and can be exploited through the uiViewSNTPServer parameter. Authentication can be achieved by exploiting CVE-2017-18373.

IBM Security Guardium 11.1 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 174735.

IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, and 2.0.4 could allow a remote authenticated attacker to execute arbitrary commands on the system. IBM X-Force ID: 180533.

VMware Workspace One Access, Access Connector, Identity Manager, and Identity Manager Connector address have a command injection vulnerability.

A security flaw has been discovered in Tenda HG3 2.0 300003070. This vulnerability affects the function formgponConf of the file /boaform/admin/formgponConf. The manipulation of the argument fmgpon_loid results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

cgi-bin/cgiServer.exx in Yealink VoIP Phone SIP-T38G allows remote authenticated users to execute arbitrary commands by calling the system method in the body of a request, as demonstrated by running unauthorized services, changing directory permissions, and modifying files.

A Command Injection issue in the traceroute feature on TP-Link TL-WR841N V13 (JP) with firmware versions prior to 201216 allows authenticated users to execute arbitrary code as root via shell metacharacters, a different vulnerability than CVE-2018-12577.