libarchive version commit 9693801580c0cf7c70e862d305270a16b52826a7 onwards (release v3.2.0 onwards) contains a CWE-20: Improper Input Validation vulnerability in WARC parser - libarchive/archive_read_support_format_warc.c, _warc_read() that can result in DoS - quasi-infinite run time and disk usage from tiny file. This attack appear to be exploitable via the victim must open a specially crafted WARC file.

The do_core_note function in readelf.c in libmagic.a in file 5.33 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a crafted ELF file.

gadget_dev_desc_UDC_store in drivers/usb/gadget/configfs.c in the Linux kernel 3.16 through 5.6.13 relies on kstrdup without considering the possibility of an internal '\0' value, which allows attackers to trigger an out-of-bounds read, aka CID-15753588bcd4.

A flaw was found in the default configuration of dnsmasq, as shipped with Fedora versions prior to 31 and in all versions Red Hat Enterprise Linux, where it listens on any interface and accepts queries from addresses outside of its local subnet. In particular, the option `local-service` is not enabled. Running dnsmasq in this manner may inadvertently make it an open resolver accessible from any address on the internet. This flaw allows an attacker to conduct a Distributed Denial of Service (DDoS) against other systems.

libEMF (aka ECMA-234 Metafile Library) through 1.0.11 allows denial of service (issue 1 of 2).

An issue was discovered in OpenEXR before 2.4.1. There is an out-of-bounds read and write in DwaCompressor::uncompress in ImfDwaCompressor.cpp when handling the UNKNOWN compression case.

An issue was discovered in OpenEXR before 2.4.1. There is an off-by-one error in use of the ImfXdr.h read function by DwaCompressor::Classifier::Classifier, leading to an out-of-bounds read.

An issue was discovered in OpenEXR before 2.4.1. There is an std::vector out-of-bounds read and write, as demonstrated by ImfTileOffsets.cpp.

An issue was discovered in OpenVPN 2.4.x before 2.4.9. An attacker can inject a data channel v2 (P_DATA_V2) packet using a victim's peer-id. Normally such packets are dropped, but if this packet arrives before the data channel crypto parameters have been initialized, the victim's connection will be dropped. This requires careful timing due to the small time window (usually within a few seconds) between the victim client connection starting and the server PUSH_REPLY response back to the client. This attack will only work if Negotiable Cipher Parameters (NCP) is in use.

libEMF (aka ECMA-234 Metafile Library) through 1.0.11 allows denial of service (issue 2 of 2).

Crash in the pcapng file parser in Wireshark 3.6.0 allows denial of service via crafted capture file

An issue was discovered in OpenEXR before 2.4.1. There is an out-of-bounds write in copyIntoFrameBuffer in ImfMisc.cpp.

Incorrect handling of input data in changeAttribute function in the libmysofa library 0.5 - 1.1 will lead to NULL pointer dereference and segmentation fault error in case of restrictive memory protection or near NULL pointer overwrite in case of no memory restrictions (e.g. in embedded environments).

An error in the "read_metadata_vorbiscomment_()" function (src/libFLAC/stream_decoder.c) in FLAC version 1.3.2 can be exploited to cause a memory leak via a specially crafted FLAC file.

The HTMLtagproc1 function in file.c in w3m before 0.5.3+git20161009 does not properly initialize values, which allows remote attackers to crash the application via a crafted html file, related to <dd> tags.

tiffttopnm in netpbm 10.47.63 does not properly use the libtiff TIFFRGBAImageGet function, which allows remote attackers to cause a denial of service (out-of-bounds read and write) via a crafted tiff image file, related to transposing width and height values.

An issue was discovered in OpenEXR before 2.4.1. Because of integer overflows in CompositeDeepScanLine::Data::handleDeepFrameBuffer and readSampleCountForLineBlock, an attacker can write to an out-of-bounds pointer.

An issue was discovered in OpenEXR before 2.4.1. There is an out-of-bounds read during RLE uncompression in rleUncompress in ImfRle.cpp.

Unicorn Engine 1.0.2 has an out-of-bounds write in tb_flush_armeb (called from cpu_arm_exec_armeb and tcg_cpu_exec_armeb).

389-ds-base before versions 1.3.5.17 and 1.3.6.10 is vulnerable to an invalid pointer dereference in the way LDAP bind requests are handled. A remote unauthenticated attacker could use this flaw to make ns-slapd crash via a specially crafted LDAP bind request, resulting in denial of service.

An integer overflow could occur when OpenEXR processes a crafted file on systems where size_t < 64 bits. This could cause an invalid bytesPerLine and maxBytesPerLine value, which could lead to problems with application stability or lead to other attack paths.

vim is vulnerable to Heap-based Buffer Overflow

MuPDF through 1.18.1 has an out-of-bounds write because the cached color converter does not properly consider the maximum key size of a hash table. This can, for example, be seen with crafted "mutool draw" input.

Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. An out-of-bounds read was found in Exiv2 versions v0.27.4 and earlier. The out-of-bounds read is triggered when Exiv2 is used to print the metadata of a crafted image file. An attacker could potentially exploit the vulnerability to cause a denial of service, if they can trick the victim into running Exiv2 on a crafted image file. Note that this bug is only triggered when printing the image ICC profile, which is a less frequently used Exiv2 operation that requires an extra command line option (`-p C`). The bug is fixed in version v0.27.5.

Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. An infinite loop was found in Exiv2 versions v0.27.4 and earlier. The infinite loop is triggered when Exiv2 is used to print the metadata of a crafted image file. An attacker could potentially exploit the vulnerability to cause a denial of service, if they can trick the victim into running Exiv2 on a crafted image file. Note that this bug is only triggered when printing the image ICC profile, which is a less frequently used Exiv2 operation that requires an extra command line option (`-p C`). The bug is fixed in version v0.27.5.

Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. An out-of-bounds read was found in Exiv2 versions v0.27.4 and earlier. The out-of-bounds read is triggered when Exiv2 is used to read the metadata of a crafted image file. An attacker could potentially exploit the vulnerability to cause a denial of service, if they can trick the victim into running Exiv2 on a crafted image file. The bug is fixed in version v0.27.5.

Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. A null pointer dereference was found in Exiv2 versions v0.27.4 and earlier. The null pointer dereference is triggered when Exiv2 is used to print the metadata of a crafted image file. An attacker could potentially exploit the vulnerability to cause a denial of service, if they can trick the victim into running Exiv2 on a crafted image file. Note that this bug is only triggered when printing the interpreted (translated) data, which is a less frequently used Exiv2 operation that requires an extra command line option (`-p t` or `-P t`). The bug is fixed in version v0.27.5.

Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. An infinite loop was found in Exiv2 versions v0.27.4 and earlier. The infinite loop is triggered when Exiv2 is used to modify the metadata of a crafted image file. An attacker could potentially exploit the vulnerability to cause a denial of service, if they can trick the victim into running Exiv2 on a crafted image file. Note that this bug is only triggered when deleting the IPTC data, which is a less frequently used Exiv2 operation that requires an extra command line option (`-d I rm`). The bug is fixed in version v0.27.5.

Vulnerability in the Java SE, Java SE Embedded product of Oracle Java SE (component: JAXP). Supported versions that are affected are Java SE: 7u231, 8u221, 11.0.4 and 13; Java SE Embedded: 8u221. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Java SE, Java SE Embedded. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets (in Java SE 8), that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.0 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L).

An issue was discovered in OpenEXR before 2.4.1. There is an out-of-bounds read in ImfOptimizedPixelReading.h.

Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. A null pointer dereference was found in Exiv2 versions v0.27.4 and earlier. The null pointer dereference is triggered when Exiv2 is used to print the metadata of a crafted image file. An attacker could potentially exploit the vulnerability to cause a denial of service, if they can trick the victim into running Exiv2 on a crafted image file. Note that this bug is only triggered when printing the interpreted (translated) data, which is a less frequently used Exiv2 operation that requires an extra command line option (`-p t` or `-P t`). The bug is fixed in version v0.27.5.

The MagickRealloc function in memory.c in Graphicsmagick 1.3.25 allows remote attackers to cause a denial of service (crash) via large dimensions in a jpeg image.

An out-of-bounds write vulnerability was found in DjVuLibre in DJVU::DjVuTXT::decode() in DjVuText.cpp via a crafted djvu file which may lead to crash and segmentation fault. This flaw affects DjVuLibre versions prior to 3.5.28.

make_arrow in arrow.c in Xfig fig2dev 3.2.7b allows a segmentation fault and out-of-bounds write because of an integer overflow via a large arrow type.

libarchive 3.4.1 through 3.5.1 has a use-after-free in copy_string (called from do_uncompress_block and process_block).

An issue was discovered in GNU LibreDWG before 0.93. Crafted input will lead to an attempted excessive memory allocation in dwg_decode_SPLINE_private in dwg.spec.

The jp2_colr_destroy function in libjasper/jp2/jp2_cod.c in JasPer before 1.900.10 allows remote attackers to cause a denial of service (NULL pointer dereference).

Go before 1.15.15 and 1.16.x before 1.16.7 has a race condition that can lead to a net/http/httputil ReverseProxy panic upon an ErrAbortHandler abort.

The bmp_getdata function in libjasper/bmp/bmp_dec.c in JasPer before 1.900.5 allows remote attackers to cause a denial of service (NULL pointer dereference) via a crafted BMP image in an imginfo command.

In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0, there are multiple out-of-bounds reads via a crafted JP2 file.

The git_commit_message function in oid.c in libgit2 before 0.24.3 allows remote attackers to cause a denial of service (out-of-bounds read) via a cat-file command with a crafted object file.

parsetagx.c in w3m before 0.5.3+git20161009 does not properly initialize values, which allows remote attackers to crash the application via a crafted html file, related to a <i> tag.

The bmp_getdata function in libjasper/bmp/bmp_dec.c in JasPer 1.900.5 allows remote attackers to cause a denial of service (NULL pointer dereference) by calling the imginfo command with a crafted BMP image. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-8690.

A NULL pointer dereference flaw was found in the way Jasper versions before 2.0.26 handled component references in CDEF box in the JP2 image format decoder. A specially crafted JP2 image file could cause an application using the Jasper library to crash when opened.

The mtree bidder in libarchive 3.2.1 does not keep track of line sizes when extending the read-ahead, which allows remote attackers to cause a denial of service (crash) via a crafted file, which triggers an invalid read in the (1) detect_form or (2) bid_entry function in libarchive/archive_read_support_format_mtree.c.

The git_oid_nfmt function in commit.c in libgit2 before 0.24.3 allows remote attackers to cause a denial of service (NULL pointer dereference) via a cat-file command with a crafted object file.

A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.

The PoDoFo::PdfVariant::DelayedLoad function in PdfVariant.h in PoDoFo 0.9.6 allows remote attackers to cause a denial of service (NULL pointer dereference) via a crafted file, because of ImageExtractor.cpp.