In Wireshark 2.4.0 to 2.4.5, the CQL dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-cql.c by checking for a nonzero number of columns.

In Contiki 3.0, a Telnet server that silently quits (before disconnection with clients) leads to connected clients entering an infinite loop and waiting forever, which may cause excessive CPU consumption.

Stack consumption vulnerability in the dissect_ber_choice function in the BER dissector in Wireshark 1.2.x through 1.2.15 and 1.4.x through 1.4.4 might allow remote attackers to cause a denial of service (infinite loop) via vectors involving self-referential ASN.1 CHOICE values.

avahi-core/socket.c in avahi-daemon in Avahi before 0.6.29 allows remote attackers to cause a denial of service (infinite loop) via an empty mDNS (1) IPv4 or (2) IPv6 UDP packet to port 5353. NOTE: this vulnerability exists because of an incorrect fix for CVE-2010-2244.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-ber.c had an infinite loop that was addressed by validating a length.

An infinite loop in SMLLexer in Pygments versions 1.5 to 2.7.3 may lead to denial of service when performing syntax highlighting of a Standard ML (SML) source file, as demonstrated by input that only contains the "exception" keyword.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-rpcrdma.c had an infinite loop that was addressed by validating a chunk size.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-usb.c had an infinite loop that was addressed by rejecting short frame header lengths.

Loop with unreachable exit condition may occur due to improper handling of unsupported input in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Voice & Music, Snapdragon Wearables

It was discovered that a programming error in the processing of HTTPS requests in the Apache Tomcat servlet and JSP engine may result in denial of service via an infinite loop. The denial of service is easily achievable as a consequence of backporting a CVE-2016-6816 fix but not backporting the fix for Tomcat bug 57544. Distributions affected by this backporting issue include Debian (before 7.0.56-3+deb8u8 and 8.0.14-1+deb8u7 in jessie) and Ubuntu.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-reload.c had an infinite loop that was addressed by validating a length.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-thread.c had an infinite loop that was addressed by using a correct integer data type.

An error within the "parse_rollei()" function (internal/dcraw_common.cpp) within LibRaw versions prior to 0.19.1 can be exploited to trigger an infinite loop.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-lltd.c had an infinite loop that was addressed by using a correct integer data type.

w3m through 0.5.3 is prone to an infinite recursion flaw in HTMLlineproc0 because the feed_table_block_tag function in table.c does not prevent a negative indent value.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-s7comm.c had an infinite loop that was addressed by correcting off-by-one errors.

OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.

In FreeBSD before 11.1-STABLE, 11.1-RELEASE-p9, 10.4-STABLE, 10.4-RELEASE-p8 and 10.3-RELEASE-p28, the length field of the ipsec option header does not count the size of the option header itself, causing an infinite loop when the length is zero. This issue can allow a remote attacker who is able to send an arbitrary packet to cause the machine to crash.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-dcm.c had an infinite loop that was addressed by checking for integer wraparound.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-rpki-rtr.c had an infinite loop that was addressed by validating a length field.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-sccp.c had an infinite loop that was addressed by using a correct integer data type.

In the ihevcd_decode function of ihevcd_decode.c, there is an infinite loop due to an incomplete frame error. This could lead to a remote denial of service of a critical system process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-64380403.

In Wireshark 2.2.0 to 2.2.12 and 2.4.0 to 2.4.4, the DMP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-dmp.c by correctly supporting a bounded number of Security Categories for a DMP Security Classification.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-openflow_v6.c had an infinite loop that was addressed by validating property lengths.

The Quagga BGP daemon (bgpd) prior to version 1.2.3 has a bug in its parsing of "Capabilities" in BGP OPEN messages, in the bgp_packet.c:bgp_capability_msg_parse function. The parser can enter an infinite loop on invalid capabilities if a Multi-Protocol capability does not have a recognized AFI/SAFI, causing a denial of service.

An infinite loop in Open Robotics ros_comm XMLRPC server in ROS Melodic through 1.4.11 and ROS Noetic through1.15.11 allows remote attackers to cause a Denial of Service in ros_comm via a crafted XMLRPC call.

jsoup is a Java library for working with HTML. Those using jsoup versions prior to 1.14.2 to parse untrusted HTML or XML may be vulnerable to DOS attacks. If the parser is run on user supplied input, an attacker may supply content that causes the parser to get stuck (loop indefinitely until cancelled), to complete more slowly than usual, or to throw an unexpected exception. This effect may support a denial of service attack. The issue is patched in version 1.14.2. There are a few available workarounds. Users may rate limit input parsing, limit the size of inputs based on system resources, and/or implement thread watchdogs to cap and timeout parse runtimes.

When reading a specially crafted 7Z archive, the construction of the list of codecs that decompress an entry can result in an infinite loop. This could be used to mount a denial of service attack against services that use Compress' sevenz package.

An issue was discovered in the CentralAuth extension in MediaWiki through 1.36. The Special:GlobalRenameRequest page is vulnerable to infinite loops and denial of service attacks when a user's current username is beyond an arbitrary maximum configuration value (MaxNameChars).

LibVNC before commit c3115350eb8bb635d0fdb4dbbb0d0541f38ed19c contains a CWE-835: Infinite loop vulnerability in VNC client code. Vulnerability allows attacker to consume excessive amount of resources like CPU and RAM

An issue was discovered in dns.c in HAProxy through 1.8.14. In the case of a compressed pointer, a crafted packet can trigger infinite recursion by making the pointer point to itself, or create a long chain of valid pointers resulting in stack exhaustion.

libhttp/url.c in shellinabox through 2.20 has an implementation flaw in the HTTP request parsing logic. By sending a crafted multipart/form-data HTTP request, an attacker could exploit this to force shellinaboxd into an infinite loop, exhausting available CPU resources and taking the service down.

golang.org/x/net before v0.0.0-20210520170846-37e1c6afe023 allows attackers to cause a denial of service (infinite loop) via crafted ParseFragment input.

QEMU can have an infinite loop in hw/rdma/vmw/pvrdma_dev_ring.c because return values are not checked (and -1 is mishandled).

An issue was discovered in tcp_pulloutofband() in tcp_in.c in HCC embedded InterNiche 4.0.1. The TCP out-of-band urgent-data processing function invokes a panic function if the pointer to the end of the out-of-band data points outside of the TCP segment's data. If the panic function hadn't a trap invocation removed, it will enter an infinite loop and therefore cause DoS (continuous loop or a device reset).

In Wireshark 2.6.0 to 2.6.1, 2.4.0 to 2.4.7, and 2.2.0 to 2.2.15, the MMSE dissector could go into an infinite loop. This was addressed in epan/proto.c by adding offset and length validation.

In Wireshark 2.6.0 to 2.6.1, 2.4.0 to 2.4.7, and 2.2.0 to 2.2.15, the Bazaar protocol dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-bzr.c by properly handling items that are too long.

In Wireshark 2.6.0 to 2.6.1, 2.4.0 to 2.4.7, and 2.2.0 to 2.2.15, the DICOM dissector could go into a large or infinite loop. This was addressed in epan/dissectors/packet-dcm.c by preventing an offset overflow.

An infinite loop vulnerability was found in libtirpc before version 1.0.2-rc2. With the port to using poll rather than select, exhaustion of file descriptors would cause the server to enter an infinite loop, consuming a large amount of CPU time and denying service to other clients until restarted.

In Wireshark 2.6.0 to 2.6.4 and 2.4.0 to 2.4.10, the MMSE dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-mmse.c by preventing length overflows.

An improper handing of overflow in the UTF-8 decoder with supplementary characters can lead to an infinite loop in the decoder causing a Denial of Service. Versions Affected: Apache Tomcat 9.0.0.M9 to 9.0.7, 8.5.0 to 8.5.30, 8.0.0.RC1 to 8.0.51, and 7.0.28 to 7.0.86.

In Miniz 2.0.7, tinfl_decompress in miniz_tinfl.c has an infinite loop because sym2 and counter can both remain equal to zero.

ngiflib.c in MiniUPnP ngiflib 0.4 has an infinite loop in DecodeGifImg and LoadGif.

The html package (aka x/net/html) through 2018-09-25 in Go mishandles <table><math><select><mi><select></table>, leading to an infinite loop during an html.Parse call because inSelectIM and inSelectInTableIM do not comply with a specification.

Pydantic is a data validation and settings management using Python type hinting. In affected versions passing either `'infinity'`, `'inf'` or `float('inf')` (or their negatives) to `datetime` or `date` fields causes validation to run forever with 100% CPU usage (on one CPU). Pydantic has been patched with fixes available in the following versions: v1.8.2, v1.7.4, v1.6.2. All these versions are available on pypi(https://pypi.org/project/pydantic/#history), and will be available on conda-forge(https://anaconda.org/conda-forge/pydantic) soon. See the changelog(https://pydantic-docs.helpmanual.io/) for details. If you absolutely can't upgrade, you can work around this risk using a validator(https://pydantic-docs.helpmanual.io/usage/validators/) to catch these values. This is not an ideal solution (in particular you'll need a slightly different function for datetimes), instead of a hack like this you should upgrade pydantic. If you are not using v1.8.x, v1.7.x or v1.6.x and are unable to upgrade to a fixed version of pydantic, please create an issue at https://github.com/samuelcolvin/pydantic/issues requesting a back-port, and we will endeavour to release a patch for earlier versions of pydantic.

sas/readstat_sas7bcat_read.c in libreadstat.a in ReadStat 0.1.1 has an infinite loop.

A vulnerability was found in the way RemoteMessageChannel, introduced in jboss-remoting versions 3.3.10, reads from an empty buffer. An attacker could use this flaw to cause denial of service via high CPU caused by an infinite loop.

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

Certain input files could make the code to enter into an infinite loop when Apache Sanselan 0.97-incubator was used to parse them, which could be used in a DoS attack. Note that Apache Sanselan (incubating) was renamed to Apache Commons Imaging.

An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.