Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Netgear R7000 1.0.11.136 is vulnerable to Command Injection in RMT_invite.cgi via device_name2 parameter.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.36, D7000 before 1.0.1.70, EX6200v2 before 1.0.1.78, EX7000 before 1.0.1.78, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.42, R6050 before 1.0.1.18, R6080 before 1.0.0.42, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.64, R6300v2 before 1.0.4.34, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7800 before 1.0.2.60, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.40.

Multiple integer overflow parameters were found in the web administration panel on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices. Most of the integer parameters sent through the web server can be abused to cause a denial of service attack.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.32, D7000 before 1.0.1.68, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects MK62 before 1.0.6.110, MR60 before 1.0.6.110, MS60 before 1.0.6.110, RAX15 before 1.0.2.82, RAX20 before 1.0.2.82, RAX200 before 1.0.3.106, RAX45 before 1.0.2.32, RAX50 before 1.0.2.32, RAX75 before 1.0.3.106, RAX80 before 1.0.3.106, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, and RBS750 before 3.2.16.6.

A stack-based buffer overflow in the upnpd binary running on NETGEAR WNDR3400v3 routers with firmware version 1.0.1.18_1.0.63 allows an attacker to remotely execute arbitrary code via a crafted UPnP SSDP packet.

Certain NETGEAR devices are affected by out-of-bounds reads and writes. This affects R6400 before 1.0.1.70, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, and XR300 before 1.0.3.50.

NETGEAR R6400 devices before 1.0.1.70 are affected by a stack-based buffer overflow by an authenticated user.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects DGN2200v1 before 1.0.0.58, D8500 before 1.0.3.42, D7000v2 before 1.0.0.51, D6400 before 1.0.0.78, D6220 before 1.0.0.44, JNDR3000 before 1.0.0.24, R8000 before 1.0.4.18, R8500 before 1.0.2.122, R8300 before 1.0.2.122, R7900 before 1.0.2.16, R7000P before 1.3.2.34, R7300DST before 1.0.0.68, R7100LG before 1.0.0.46, R6900P before 1.3.2.34, R7000 before 1.0.9.28, R6900 before 1.0.1.46, R6700 before 1.0.1.46, R6400v2 before 1.0.2.56, R6400 before 1.0.1.42, R6300v2 before 1.0.4.28, R6250 before 1.0.4.26, WNDR3400v3 before 1.0.1.22, WNDR4500v2 before 1.0.0.72, and WNR3500Lv2 before 1.2.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.44, D6400 before 1.0.0.78, D7000v2 before 1.0.0.51, D8500 before 1.0.3.42, DGN2200v4 before 1.0.0.110, DGND2200Bv4 before 1.0.0.109, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.24, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, R6250 before 1.0.4.26, R6300v2 before 1.0.4.28, R6400 before 1.0.1.36, R6400v2 before 1.0.2.52, R6700 before 1.0.1.46, R6900 before 1.0.1.46, R7000 before 1.0.9.28, R6900P before 1.3.1.44, R7000P before 1.3.1.44, R7100LG before 1.0.0.46, R7300DST before 1.0.0.68, R7900 before 1.0.2.10, R8000 before 1.0.4.12, R7900P before 1.3.0.10, R8000P before 1.3.0.10, R8300 before 1.0.2.122, R8500 before 1.0.2.122, WN2500RPv2 before 1.0.1.54, WNDR3400v3 before 1.0.1.22, and WNR3500Lv2 before 1.2.0.54.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. When parsing the SOAP_LOGIN_TOKEN environment variable, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14107.

A vulnerability was found in Netgear EX3700 up to 1.0.0.88. It has been classified as critical. Affected is the function sub_41619C of the file /mtd. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.0.0.98 is able to address this issue. It is recommended to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6400v2 1.0.4.106_10.0.80 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. When parsing the uuid request header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14110.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. A crafted SOAP request can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13511.

NETGEAR R7800 net-cgi Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of the soap_block_table file. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-13055.

NETGEAR Multiple Routers httpd Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of multiple NETGEAR routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. When parsing the strings file, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-13709.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects RBW30 before 2.6.2.2, RBK852 before 3.2.17.12, RBK853 before 3.2.17.12, RBK854 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, RBK753 before 3.2.17.12, RBK753S before 3.2.17.12, RBK754 before 3.2.17.12, RBR750 before 3.2.17.12, and RBS750 before 3.2.17.12.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_bind.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12303.

In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.

Netgear routers R7000P before v1.3.3.154, R6900P before v1.3.3.154, R7960P before v1.4.4.94, and R8000P before v1.4.4.94 were discovered to contain a pre-authentication stack overflow.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameter openvpn_push1.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter enable_band_steering.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter wan_dns1_pri.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameters: starthour, startminute , endhour, and endminute.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameters apmode_dns1_pri and apmode_dns1_sec.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter enable_band_steering.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via wan_dns1_pri.

NETGEAR Nighthawk WiFi Mesh systems and routers are affected by a stack-based buffer overflow vulnerability. This affects MR60 before 1.1.7.132, MS60 before 1.1.7.132, R6900P before 1.3.3.154, R7000P before 1.3.3.154, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6400 before 1.0.1.70, R7000 before 1.0.11.126, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RS400 before 1.5.1.80, R6400v2 before 1.0.4.118, R7000P before 1.3.3.140, RAX80 before 1.0.4.120, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, and RAX75 before 1.0.4.120.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_push1.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter wan_dns1_sec.

NETGEAR RAX30 fing_dil Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within fing_dil service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19843.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, and WNDR4500v3 before 1.0.0.54.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WAC120 before 2.1.7, WN604 before 3.3.10, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, and WND930 before 2.1.5.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects EX2700 before 1.0.1.28, R7800 before 1.0.2.40, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, and WN3100RPv2 before 1.0.0.56.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D8500 before 1.0.3.42, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.24, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, R6250 before 1.0.4.26, R6300-2CXNAS before 1.0.3.60, R6300v2 before 1.0.4.28, R6400 before 1.0.1.36, R6400v2 before 1.0.2.52, R6700 before 1.0.1.46, R6900 before 1.0.1.46, R7000 before 1.0.9.28, R7000P before 1.3.1.44, R6900P before 1.3.1.44, R7100LG before 1.0.0.46, R7300 before 1.0.0.68, R7900 before 1.0.2.10, R8000 before 1.0.4.18, R8000P before 1.3.0.10, R7900P before 1.3.0.10, R8500 before 1.0.2.122, R8300 before 1.0.2.122, RBW30 before 2.1.2.6, WN2500RPv2 before 1.0.0.54, and WNR3500Lv2 before 1.2.0.56.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6100 before 1.0.1.20, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6700 before 1.0.1.48, R7900 before 1.0.2.16, R6900 before 1.0.1.48, R7000P before 1.3.1.44, R6900P before 1.3.1.44, R6250 before 1.0.4.30, R6300v2 before 1.0.4.32, R6400 before 1.0.1.44, R6400v2 before 1.0.2.60, R7000 before 1.0.9.34, R7100LG before 1.0.0.48, R7300 before 1.0.0.68, R8000 before 1.0.4.18, R8000P before 1.4.1.24, R7900P before 1.4.1.24, R8500 before 1.0.2.122, R8300 before 1.0.2.122, WN2500RPv2 before 1.0.1.54, EX3700 before 1.0.0.72, EX3800 before 1.0.0.72, EX6000 before 1.0.0.32, EX6100 before 1.0.2.24, EX6120 before 1.0.0.42, EX6130 before 1.0.0.24, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, D7000v2 before 1.0.0.51, D6220 before 1.0.0.46, D6400 before 1.0.0.82, and D8500 before 1.0.3.42.

A stack-based buffer overflow vulnerability exists in the JSON Parsing getblockschedule() functionality of Netgear RAX30 1.0.11.96 and 1.0.7.78. A specially crafted HTTP request can lead to code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.