An issue was discovered in the 3CX Phone System Management Console prior to version 18 Update 3 FINAL. An unauthenticated attacker could abuse improperly secured access to arbitrary files on the server (via /Electron/download directory traversal in conjunction with a path component that uses backslash characters), leading to cleartext credential disclosure. Afterwards, the authenticated attacker is able to upload a file that overwrites a 3CX service binary, leading to Remote Code Execution as NT AUTHORITY\SYSTEM on Windows installations. NOTE: this issue exists because of an incomplete fix for CVE-2022-48482.

Battelle V2I Hub 2.5.1 could allow a remote attacker to obtain sensitive information, caused by the failure to restrict access to the API key file. An attacker could exploit this vulnerability to obtain the current API key to gain unauthorized access to the system.

Aquaforest TIFF Server 4.0 allows Unauthenticated SMB Hash Capture via UNC.

Insufficiently protected credentials in the Intel(R) Datacenter Group Event iOS application, all versions, may allow an unauthenticated user to potentially enable information disclosure via network access.

A logic error in Nextcloud Server 19.0.0 caused a plaintext storage of the share password when it was given on the initial create API call.

The Archer RSS feed integration for Archer 6.x through 6.9 SP1 (6.9.1.0) is affected by an insecure credential storage vulnerability. A malicious attacker may obtain access to credential information to use it in further attacks.

Cleartext password storage exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. The files in question are /etc/waipass and /etc/roapass. In case one of these devices is compromised, the attacker can gain access to passwords and abuse them to compromise further systems.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC3600 up to 1.0.22. This affects the function geteasycfg of the file /cgi-bin/lighttpd.cgi of the component Web Management Interface. The manipulation of the argument Password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

register.ghp in EFS Software Easy Chat Server versions 2.0 to 3.1 allows remote attackers to discover passwords by sending the username parameter in conjunction with an empty password parameter, and reading the HTML source code of the response.

Smb4K before 1.1.1 allows remote attackers to obtain credentials via vectors related to the cuid option in the "Additional options" line edit.

Wireless IP Camera (P2P) WIFICAM devices have an "Apple Production IOS Push Services" private RSA key and certificate stored in /system/www/pem/ck.pem inside the firmware, which allows attackers to obtain sensitive information.

SAP Business Objects Business Intelligence Platform (CMC), version 4.1, 4.2, shows cleartext password in the response, leading to Information Disclosure. It involves social engineering in order to gain access to system and If password is known, it would give administrative rights to the attacker to read/modify delete the data and rights within the system.

Kyocera multifunction printers running vulnerable versions of Net View unintentionally expose sensitive user information, including usernames and passwords, through an insufficiently protected address book export function.

Missing Password Field Masking vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Agent component).This issue affects Hitachi Device Manager: before 8.8.5-04.

IBM CICS Transaction Gateway for Multiplatforms 9.2 and 9.3 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval.

Implemented protections on AWS credentials that were not properly protected.

Jenkins Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows attackers able to control agent processes to retrieve all username/password credentials stored on the Jenkins controller.

PostgreSQL versions 8.4 - 9.6 are vulnerable to information leak in pg_user_mappings view which discloses foreign server passwords to any user having USAGE privilege on the associated foreign server.

Insufficiently Protected Credentials vulnerability in Apache Solr. This issue affects Apache Solr: from 6.0.0 through 8.11.2, from 9.0.0 before 9.3.0. One of the two endpoints that publishes the Solr process' Java system properties, /admin/info/properties, was only setup to hide system properties that had "password" contained in the name. There are a number of sensitive system properties, such as "basicauth" and "aws.secretKey" do not contain "password", thus their values were published via the "/admin/info/properties" endpoint. This endpoint populates the list of System Properties on the home screen of the Solr Admin page, making the exposed credentials visible in the UI. This /admin/info/properties endpoint is protected under the "config-read" permission. Therefore, Solr Clouds with Authorization enabled will only be vulnerable through logged-in users that have the "config-read" permission. Users are recommended to upgrade to version 9.3.0 or 8.11.3, which fixes the issue. A single option now controls hiding Java system property for all endpoints, "-Dsolr.hiddenSysProps". By default all known sensitive properties are hidden (including "-Dbasicauth"), as well as any property with a name containing "secret" or "password". Users who cannot upgrade can also use the following Java system property to fix the issue:   '-Dsolr.redaction.system.pattern=.*(password|secret|basicauth).*'

On Apache ShenYu versions 2.4.0 and 2.4.1, and endpoint existed that disclosed the passwords of all users. Users are recommended to upgrade to version 2.4.2 or later.

An Insufficiently Protected Credentials issue was discovered in Schneider Electric Modicon PLCs Modicon M241, all firmware versions, and Modicon M251, all firmware versions. Log-in credentials are sent over the network with Base64 encoding leaving them susceptible to sniffing. Sniffed credentials could then be used to log into the web application.

Anchore Enterprise anchorectl version 0.1.4 improperly stored credentials when generating a Software Bill of Materials. anchorectl will add the credentials used to access Anchore Enterprise API in the Software Bill of Materials (SBOM) generated by anchorectl. Users of anchorectl version 0.1.4 should upgrade to anchorectl version 0.1.5 to resolve this issue.

GLPI is a Free Asset and IT Management Software package, that provides ITIL Service Desk features, licenses tracking and software auditing. When you pass the config to the javascript, some entries are filtered out. The variable ldap_pass is not filtered and when you look at the source code of the rendered page, we can see the password for the root dn. Users are advised to upgrade. There is no known workaround for this issue.

Missing input masking in GitLab CE/EE affecting all versions starting from 1.0.2 before 14.8.6, all versions from 14.9.0 before 14.9.4, and all versions from 14.10.0 before 14.10.1 causes potentially sensitive integration properties to be disclosed in the web interface

NetIQ iManager before 3.0.3 delivered a SSL private key in a Java application (JAR file) for authentication to Sentinel, allowing attackers to extract and establish their own connections to the Sentinel appliance.

An issue has been discovered in GitLab affecting all versions starting from 14.6 before 14.6.5, all versions starting from 14.7 before 14.7.4, all versions starting from 14.8 before 14.8.2. GitLab was leaking user passwords when adding mirrors with SSH credentials under specific conditions.

Unprotected storage of credentials in CA PPM 14.3 and below, 14.4, 15.1, 15.2 CP5 and below, and 15.3 CP2 and below, allows attackers to access sensitive information.

The D-link router DIR-885L-MFC 1.15b02, v1.21b05 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. Attackers can use "show system infor" to discover cleartext TELNET credentials.

The D-Link router DIR-880L 1.07 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

VMware vCenter Server (6.5 prior to 6.5 U1) contains an information disclosure vulnerability. This issue may allow plaintext credentials to be obtained when using the vCenter Server Appliance file-based backup feature.

Storing passwords in a recoverable format in the DOCUMENTATION plugin component of Strapi before 3.6.9 and 4.x before 4.1.5 allows an attacker to access a victim's HTTP request, get the victim's cookie, perform a base64 decode on the victim's cookie, and obtain a cleartext password, leading to getting API documentation for further API attacks.

An issue was discovered in Honeywell XL Web II controller XL1000C500 XLWebExe-2-01-00 and prior, and XLWeb 500 XLWebExe-1-02-08 and prior. Password is stored in clear text.

The API in the Push extension for MediaWiki through 1.35 used cleartext for ApiPush credentials, allowing for potential information disclosure.

The D-Link router DIR-868L 3.01 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

Settings/network settings/wireless settings on the Alecto DVC-215IP camera version 63.1.1.173 and below shows the Wi-Fi passphrase hidden, but by editing/removing the style of the password field the password becomes visible which grants access to an internal network connected to the camera.

Cleartext Transmission of Sensitive Information vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 exists which could leak sensitive information transmitted between the mobile app and the camera device.

An issue was discovered on Ubiquiti UniFi Meshing Access Point UAP-AC-M 4.3.21.11325 and UniFi Controller 6.0.28 devices. Cached credentials are not erased from an access point returning wirelessly from a disconnected state. This may provide unintended network access.

RVToolsPasswordEncryption.exe in RVTools 4.0.6 allows users to encrypt passwords to be used in the configuration files. This encryption used a static IV and key, and thus using the Decrypt() method from VISKD.cs from the RVTools.exe executable allows for decrypting the encrypted passwords. The accounts used in the configuration files have access to vSphere instances.

An insufficiently protected credentials issue was discovered in Intland codeBeamer ALM 10.x through 10.1.SP4. The remember-me cookie (CB_LOGIN) issued by the application contains the encrypted user's credentials. However, due to a bug in the application code, those credentials are encrypted using a NULL encryption key.

GE Healthcare Imaging and Ultrasound Products may allow specific credentials to be exposed during transport over the network.

The WebTools component on Canon Oce ColorWave 3500 5.1.1.0 devices allows attackers to retrieve stored SMB credentials via the export feature, even though these are intentionally inaccessible in the UI.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). The password used for authentication for the LOGO! Website and the LOGO! Access Tool is sent in a recoverable format. An attacker with access to the network traffic could derive valid logins.

NATS nats.js before 2.0.0-209, nats.ws before 1.0.0-111, and nats.deno before 1.0.0-9 allow credential disclosure from a client to a server.

Credentials are printed in clear text in the IBM Spectrum Protect Plus 10.1.0.0 through 10.1.9.3 virgo log file in certain cases. Credentials could be the remote vSnap, offload targets, or VADP credentials depending on the operation performed. Credentials that are using API key or certificate are not printed. IBM X-Force ID: 222231.

An issue was discovered where a page is exposed that has the current administrator password in cleartext in the source code of the page. No authentication is required in order to reach the page (a certain live_?.shtml page with the variable syspasswd). Affected Devices: Wavlink WN530HG4, Wavlink WN531G3, and Wavlink WN572HG3

Playground Sessions v2.5.582 (and earlier) for Windows, stores the user credentials in plain text allowing anyone with access to UserProfiles.sol to extract the email and password.

homee Brain Cube v2 (2.28.2 and 2.28.4) devices have sensitive SSH keys within downloadable and unencrypted firmware images. This allows remote attackers to use the support server as a SOCKS proxy.

In Ice Qube Thermal Management Center versions prior to version 4.13, passwords are stored in plaintext in a file that is accessible without authentication.

Jenkins Artifactory Plugin 3.6.0 and earlier transmits configured passwords in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.