An issue was discovered in Samsung Mobile Processor Exynos 980, Exynos 850, Exynos 1280, Exynos 1380, and Exynos 1330. In the function slsi_rx_range_done_ind(), there is no input validation check on rtt_id coming from userspace, which can lead to a heap overwrite.

In procfile_write of drivers/misc/mediatek/connectivity/wlan/gen2/os/linux/gl_proc.c, there is a possible OOB write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated---

In BNEP_Write of bnep_api.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-6.0 Android-6.0.1 Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android ID: A-74947856.

A security flaw has been discovered in floooh sokol up to 33e2271c431bf21de001e972f72da17a984da932. This vulnerability affects the function _sg_pipeline_common_init in the library sokol_gfx.h. Performing manipulation results in heap-based buffer overflow. The attack needs to be approached locally. The exploit has been released to the public and may be exploited. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The patch is named 33e2271c431bf21de001e972f72da17a984da932. It is suggested to install a patch to address this issue.

A vulnerability was detected in floooh sokol up to 16cbcc864012898793cd2bc57f802499a264ea40. The impacted element is the function _sg_pipeline_desc_defaults in the library sokol_gfx.h. The manipulation results in stack-based buffer overflow. The attack requires a local approach. The exploit is now public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is identified as 5d11344150973f15e16d3ec4ee7550a73fb995e0. It is advisable to implement a patch to correct this issue.

In rw_t2t_handle_tlv_detect of rw_t2t_ndef.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege in the NFC kernel with no additional execution privileges needed. User interaction is needed for exploitation. Product: Android. Versions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9. Android ID: A-112161557.

In cmd_flash_mmc_sparse_img of dl_commands.c, there is a possible out of bounds write due to a missing bounds check. This could lead to a local escalation of privilege in the bootloader with no additional execution privileges needed. User interaction is not needed for exploitation.

The interactive service in OpenVPN 2.6.9 and earlier allows an attacker to send data causing a stack overflow which can be used to execute arbitrary code with more privileges.

In rpc_msg_handler and related handlers of drivers/misc/mediatek/eccci/port_rpc.c, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

In hid_debug_events_read of drivers/hid/hid-debug.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-71361580.

In Eclipse OMR versions 0.2.0 to 0.4.0, some of the z/OS atoe print functions use a constant length buffer for string conversion. If the input format string and arguments are larger than the buffer size then buffer overflow occurs. Beginning in version 0.5.0, the conversion buffers are sized correctly and checked appropriately to prevent buffer overflows.

IBM CICS TX Standard 11.1 and IBM CICS TX Advanced 10.1 and 11.1  could allow a local user to execute arbitrary code on the system due to failure to handle DNS return requests by the gethostbyname function.

In HID_DevAddRecord of hidd_api.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege in the Bluetooth service with User execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-79946737.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it.

In the deserialization constructor of NanoAppFilter.java, there is a possible loss of data due to type confusion. This could lead to local escalation of privilege in the system server with no additional execution privileges needed. User interaction is not needed for exploitation.

A vulnerability was found in MicroWord eScan Antivirus 7.0.32 on Linux and classified as critical. Affected by this issue is the function strcpy of the component VirusPopUp. The manipulation leads to stack-based buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IBM CICS TX Standard 11.1 and IBM CICS TX Advanced 10.1 and 11.1 could allow a local user to execute arbitrary code on the system due to failure to handle DNS return requests by the gethostbyaddr function.

Memory corruption while processing MFC channel configuration during music playback.

In store_upgrade and store_cmd of drivers/input/touchscreen/stm/ftm4_pdc.c, there are out of bound writes due to missing bounds checks or integer underflows. These could lead to escalation of privilege.

In FT_ACDK_CCT_V2_OP_ISP_SET_TUNING_PARAS of Meta_CCAP_Para.cpp, there is a possible out of bounds write due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

The drivers in the tool packages use RTL_QUERY_REGISTRY_DIRECT flag to read a registry value to which an untrusted user-mode application may be able to cause a buffer overflow.

A security vulnerability has been detected in Kamailio 5.5. Impacted is the function rve_destroy of the file src/core/rvalue.c of the component Configuration File Handler. The manipulation leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. There is ongoing doubt regarding the real existence of this vulnerability. This attack requires manipulating config files which might not be a realistic scenario in many cases. The vendor was contacted early about this disclosure but did not respond in any way.

Insufficient validation of environment variables in the telnet client supplied in Junos OS can lead to stack-based buffer overflows, which can be exploited to bypass veriexec restrictions on Junos OS. A stack-based overflow is present in the handling of environment variables when connecting via the telnet client to remote telnet servers. This issue only affects the telnet client — accessible from the CLI or shell — in Junos OS. Inbound telnet services are not affected by this issue. This issue affects: Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S13; 12.3X48 versions prior to 12.3X48-D80; 14.1X53 versions prior to 14.1X53-D130, 14.1X53-D49; 15.1 versions prior to 15.1F6-S12, 15.1R7-S4; 15.1X49 versions prior to 15.1X49-D170; 15.1X53 versions prior to 15.1X53-D237, 15.1X53-D496, 15.1X53-D591, 15.1X53-D69; 16.1 versions prior to 16.1R3-S11, 16.1R7-S4; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R1-S8, 17.2R2-S7, 17.2R3-S1; 17.3 versions prior to 17.3R3-S4; 17.4 versions prior to 17.4R1-S6, 17.4R2-S3, 17.4R3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S3; 18.2 versions prior to 18.2R1-S5, 18.2R2-S2, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3, 18.3R2; 18.4 versions prior to 18.4R1-S2, 18.4R2.

In WMT_unlocked_ioctl of MTK WMT device driver, there is a possible OOB write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

A vulnerability classified as critical was found in code-projects Police FIR Record Management System 1.0. Affected by this vulnerability is an unknown functionality of the component Delete Record Handler. The manipulation leads to stack-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used.

The drivers in the tool packages use RTL_QUERY_REGISTRY_DIRECT flag to read a registry value to which an untrusted user-mode application may be able to cause a buffer overflow.

The drivers in the tool packages use RTL_QUERY_REGISTRY_DIRECT flag to read a registry value to which an untrusted user-mode application may be able to cause a buffer overflow.

In nfc_llcp_build_sdreq_tlv of llcp_commands.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-73083945.

In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")

A vulnerability was determined in BehaviorTree up to 4.7.0. This affects the function ParseScript of the file /src/script_parser.cpp of the component Diagnostic Message Handler. Executing manipulation of the argument error_msgs_buffer can lead to stack-based buffer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. This patch is called cb6c7514efa628adb8180b58b4c9ccdebbe096e3. A patch should be applied to remediate this issue.

An out of bounds write due to a missing bounds check in LabVIEW may result in remote code execution. Successful exploitation requires an attacker to provide a user with a specially crafted VI. This vulnerability affects LabVIEW 2024 Q1 and prior versions.

In oemCallback of ril.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

In fm_set_stat of mediatek FM radio driver, there is a possible OOB write due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

In the hidp_process_report in bluetooth, there is an integer overflow. This could lead to an out of bounds write with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-65853588 References: Upstream kernel.

In HWCSession::SetColorModeById of hwc_session.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

An issue was discovered in Samsung Mobile Processor Exynos 980, Exynos 850, Exynos 1280, Exynos 1380, and Exynos 1330. In the function slsi_nan_publish_get_nl_params(), there is no input validation check on hal_req->service_specific_info_len coming from userspace, which can lead to a heap overwrite.

In rpc_msg_handler and related handlers of drivers/misc/mediatek/eccci/port_rpc.c, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

In IMSA_Recv_Thread and VT_IMCB_Thread of ImsaClient.cpp and VideoTelephony.c, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In the MTK_FLP_MSG_HAL_DIAG_REPORT_DATA_NTF handler of flp2hal_- interface.c, there is a possible stack buffer overflow due to a missing bounds check. This could lead to local escalation of privilege in a privileged process with System execution privileges needed. User interaction is not needed for exploitation.

In gattServerSendResponseNative of com_android_bluetooth_gatt.cpp, there is a possible out of bounds stack write due to a missing bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.

In get_binary of vendor/mediatek/proprietary/hardware/connectivity/gps/gps_hal/src/data_coder.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

In ResStringPool::setTo of ResourceTypes.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In update_policy_data of , there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

An issue was discovered in Samsung Mobile Processor Exynos 980, Exynos 850, Exynos 1280, Exynos 1380, and Exynos 1330. In the function slsi_nan_subscribe_get_nl_params(), there is no input validation check on hal_req->num_intf_addr_present coming from userspace, which can lead to a heap overwrite.

In CryptoPlugin::decrypt of CryptoPlugin.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

An issue was discovered in Samsung Mobile Processor Exynos 980, Exynos 850, Exynos 1280, Exynos 1380, and Exynos 1330. In the function slsi_nan_followup_get_nl_params(), there is no input validation check on hal_req->service_specific_info_len coming from userspace, which can lead to a heap overwrite.