Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 37 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 33 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 31 of 46).

OpenEMR version 5.0.0 contains a OS Command Injection vulnerability in fax_dispatch.php that can result in OS command injection by an authenticated attacker with any role. This vulnerability appears to have been fixed in 5.0.0 Patch 2 or higher.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings.

A command injection remote command execution vulnerability in Trend Micro Email Encryption Gateway 5.5 could allow a remote attacker to execute arbitrary code on vulnerable installations due to a flaw in the LauncherServer. Authentication is required to exploit this vulnerability.

Hongdian H8922 3.0.5 devices allow OS command injection via shell metacharacters into the ip-address (aka Destination) field to the tools.cgi ping command, which is accessible with the username guest and password guest.

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 6 of 6).

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via export.cgi encKey parameter.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via formSysCmd parameter.

baserCMS (baserCMS 4.1.0.1 and earlier versions, baserCMS 3.0.15 and earlier versions) allows remote authenticated attackers to execute arbitrary OS commands via unspecified vectors.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter of a certain URL, different URL from CVE-2018-0634.

A vulnerability in the error reporting feature of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the error reporting application configuration. An attacker could exploit this vulnerability by sending a crafted command to the error reporting feature. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.

A vulnerability in the NX-API management application programming interface (API) in devices running, or based on, Cisco NX-OS Software could allow an authenticated, remote attacker to execute commands with elevated privileges. The vulnerability is due to a failure to properly validate certain parameters included within an NX-API request. An attacker that can successfully authenticate to the NX-API could submit a request designed to bypass NX-OS role assignment. A successful exploit could allow the attacker to execute commands with elevated privileges. This vulnerability affects the following if configured to use the NX-API feature: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvc73177, CSCve40903, CSCve40911.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the action set_sta_enrollee_pin_5g and the key wps_sta_enrollee_pin.

Command injection vulnerability in change password of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via tools_firmware.cgi date parameter, time parameter, and offset parameter.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd in formWsc parameter.

Command injection vulnerability in networking of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

Command injection vulnerability in SSH of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.

A vulnerability in the web-based UI of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware before 11.2(1) could allow an authenticated, remote attacker to perform a command injection and execute commands with the privileges of the web server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including arbitrary shell commands in a specific user input field. Cisco Bug IDs: CSCvi51426.

Cohesive Networks VNS3 Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cohesive Networks VNS3. Authentication is required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 8000 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24178.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter or bootmode parameter of a certain URL.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via import.cgi encKey parameter.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

Command injection vulnerability in date of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

A vulnerability in the web management GUI of the Cisco D9800 Network Transport Receiver could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of GUI command arguments. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable GUI command. An exploit could allow the attacker to execute commands on the underlying BusyBox operating system. These commands are run at the privilege level of the authenticated user. The attacker needs valid device credentials for this attack. Cisco Bug IDs: CSCvg74691.

A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.

IPFire 2.19 has a Remote Command Injection vulnerability in ids.cgi via the OINKCODE parameter, which is mishandled by a shell. This can be exploited directly by authenticated users, or through CSRF.

In Webmin through 1.910, any user authorized to the "Package Updates" module can execute arbitrary commands with root privileges via the data parameter to update.cgi.

The administration web interface on Belkin Linksys WRT160NL 1.0.04.002_US_20130619 devices allows remote authenticated attackers to execute system commands with root privileges via shell metacharacters in the ui_language POST parameter to the apply.cgi form endpoint. This occurs in do_upgrade_post in mini_httpd. NOTE: This vulnerability only affects products that are no longer supported by the maintaine

A command injection was identified on Barco ClickShare Base Unit devices with CSM-1 firmware before 1.7.0.3 and CSC-1 firmware before 1.10.0.10. An attacker with access to the product's web API can exploit this vulnerability to completely compromise the vulnerable device.

Nagios XI version xi-5.7.5 is affected by OS command injection. The vulnerability exists in the file /usr/local/nagiosxi/html/includes/configwizards/switch/switch.inc.php due to improper sanitization of authenticated user-controlled input by a single HTTP request, which can lead to OS command injection on the Nagios XI server.

Tuleap before 9.7 allows command injection via the PhpWiki 1.3.10 SyntaxHighlighter plugin. This occurs in the Project Wiki component because the proc_open PHP function is used within PhpWiki before 1.5.5 with a syntax value in its first argument, and an authenticated Tuleap user can control this value, even with shell metacharacters, as demonstrated by a '<?plugin SyntaxHighlighter syntax="c;id"' line to execute the id command.

TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n allow remote code execution with a single HTTP request by placing shell commands in a "host=" line within HTTP POST data.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.5.x: 6.5.4.17 and below; Aruba Instant 8.3.x: 8.3.0.13 and below; Aruba Instant 8.5.x: 8.5.0.10 and below; Aruba Instant 8.6.x: 8.6.0.5 and below; Aruba Instant 8.7.x: 8.7.0.0 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

A command injection vulnerability in UploadHandler.php in Vesta Control Panel 0.9.8-24 allows remote attackers to escalate from regular registered users to root.

A remote command injection vulnerability exists in the Barracuda Load Balancer product line (confirmed on v5.4.0.004 (2015-11-26) and v6.0.1.006 (2016-08-19); fixed in 6.1.0.003 (2017-01-17)) in which an authenticated user can execute arbitrary shell commands and gain root privileges. The vulnerability stems from unsanitized data being processed in a system call when the delete_assessment command is issued.

Accellion Secure File Transfer Appliance before 8_0_105 allows remote authenticated administrators to bypass the restricted shell and execute arbitrary commands via shell metacharacters to the ping command, as demonstrated by modifying the cli program.

Ruckus Networks Unleashed AP firmware releases before 200.6.10.1.x and Ruckus Networks Zone Director firmware releases 10.1.0.0.x, 9.10.2.0.x, 9.12.3.0.x, 9.13.3.0.x, 10.0.1.0.x or before contain authenticated Root Command Injection in the CLI that could allow authenticated valid users to execute privileged commands on the respective systems.

A vulnerability in the esc_listener.py script of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to execute arbitrary commands as the tomcat user on an affected system, aka an Authentication Request Processing Arbitrary Command Execution Vulnerability. More Information: CSCvc76642. Known Affected Releases: 2.2(9.76).

NfSen before 1.3.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the customfmt parameter (aka the "Custom output format" field).

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.