An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. A very long password to /goform/formLogin could lead to a stack-based buffer overflow and overwrite the return address.

On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code.

On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 SetPasswdSettings commands without authentication to trigger an admin password change.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. Within the handler function of the /goform/DDNS route, a very long password could lead to a stack-based buffer overflow and overwrite the return address.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.

On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/sylogapply route. This could lead to command injection via the syslogIp parameter after /goform/clearlog is invoked.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/form2systime.cgi route. This could lead to command injection via shell metacharacters in the datetime parameter.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as very critical, has been found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. This issue affects some unknown processing of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument user with the input messagebus leads to hard-coded credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259283. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

Stack-based buffer overflow in the websRedirect function in GoAhead on D-Link DIR-816 A2 (CN) routers with firmware version 1.10B05 allows unauthenticated remote attackers to execute arbitrary code via a request with a long HTTP Host header.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

D-Link DIR-815 REV. B (with firmware through DIR-815_REVB_FIRMWARE_PATCH_2.07.B01) devices have permission bypass and information disclosure in /htdocs/web/getcfg.php, as demonstrated by a /getcfg.php?a=%0a_POST_SERVICES%3DDEVICE.ACCOUNT%0aAUTHORIZED_GROUP%3D1 request.

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device.

D-Link D-View Use of Hard-coded Cryptographic Key Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the TokenUtils class. The issue results from a hard-coded cryptographic key. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19659.

D-Link D-View TftpReceiveFileHandler Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the TftpReceiveFileHandler class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-19497.

D-Link DGS-1500 Ax devices before 2.51B021 have a hardcoded password, which allows remote attackers to obtain shell access.

The DHCP client on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allows unauthenticated remote code execution as root because /etc/services/INET/inet_ipv4.php mishandles shell metacharacters, affecting generated files such as WAN-1-udhcpc.sh.

D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices have a hardcoded password of wrgac25_dlink.2013gui_dir850l for the Alphanetworks account upon device reset, which allows remote attackers to obtain root access via a TELNET session.

D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has a remote code execution vulnerability. A UDP "Discover" service, which provides multiple functions such as changing the passwords and getting basic information, was installed on the device. A remote attacker can send a crafted UDP request to finderd to perform stack overflow and execute arbitrary code with root privilege on the device.

An issue was discovered on the D-Link DWR-932B router. qmiweb allows command injection with ` characters.

Buffer overflow in the SSH server functionality on the D-Link DES-3800 with firmware before 4.50B052, DWL-2100AP with firmware before 2.50RC548, and DWL-3200AP with firmware before 2.55RC549 allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors.

An issue was discovered on the D-Link DWR-932B router. Undocumented TELNET and SSH services provide logins to admin with the password admin and root with the password 1234.

Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.

D-Link DSR-500N version 1.02 contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file.If an attacker succeeds in recovering the cleartext password of the identified hash value, he will be able to log in via SSH or Telnet and thus gain access to the underlying embedded Linux operating system on the device. Fixed in version 2.12/2. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via a urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because HTTP_ST is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because REMOTE_PORT is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

Certain D-Link devices have a hardcoded Alphanetworks user account with TELNET access because of /etc/config/image_sign or /etc/alpha_config/image_sign. This affects DIR-600 B1 V2.01 for WW, DIR-890L A1 v1.03, DIR-615 J1 v100 (for DCN), DIR-645 A1 v1.03, DIR-815 A1 v1.01, DIR-823 A1 v1.01, and DIR-842 C1 v3.00.

A SQL Injection was discovered in D-Link Central WiFi Manager CWM(100) before v1.03R0100_BETA6 in PayAction.class.php with the index.php/Pay/passcodeAuth parameter passcode. The vulnerability does not need any authentication.

D-Link DIR-655 C devices before 3.02B05 BETA03 allow remote attackers to execute arbitrary commands via shell metacharacters in the online_firmware_check.cgi check_fw_url parameter.

An issue was discovered in the D-Link Central WiFi Manager CWM(100) before v1.03R0100_BETA6. Input does not get validated and arbitrary SQL statements can be executed in the database via the /web/Public/Conn.php parameter dbSQL.

The UPnP endpoint URL /gena.cgi in the D-Link DIR-859 Wi-Fi router 1.05 and 1.06B01 Beta01 allows an Unauthenticated remote attacker to execute system commands as root, by sending a specially crafted HTTP SUBSCRIBE request to the UPnP service when connecting to the local network.

An issue was discovered in D-Link DIR-806 devices. There is a command injection in function hnap_main, which calls system() without checking the parameter that can be controlled by user, and finally allows remote attackers to execute arbitrary shell commands with a special HTTP header.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetMasterWLanSettings with shell metacharacters to /squashfs-root/www/HNAP1/control/SetMasterWLanSettings.php.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetWizardConfig with shell metacharacters to /squashfs-root/www/HNAP1/control/SetWizardConfig.php.

On D-Link DIR-859 A3-1.06 and DIR-850 A1.13 devices, /etc/services/DEVICE.TIME.php allows command injection via the $SERVER variable.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because SERVER_ID is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

Processing malformed SOAP messages when performing the HNAP Login action causes a buffer overflow in the stack in some D-Link DIR routers. The vulnerable XML fields within the SOAP body are: Action, Username, LoginPassword, and Captcha. The following products are affected: DIR-823, DIR-822, DIR-818L(W), DIR-895L, DIR-890L, DIR-885L, DIR-880L, DIR-868L, and DIR-850L.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. This vulnerability affects unknown code of the file /goform/form2lansetup.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been declared as critical. This vulnerability affects the function QoSPortSetup of the file /goform/QoSPortSetup. The manipulation of the argument port0_group/port0_remarker/ssid0_group/ssid0_remarker leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this issue is the function wirelessApcli_5g of the file /goform/wirelessApcli_5g. The manipulation of the argument apcli_mode_5g/apcli_enc_5g/apcli_default_key_5g leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been classified as critical. This affects the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The web interface on D-Link DIR-100, DIR-120, DI-624S, DI-524UP, DI-604S, DI-604UP, DI-604+, and TM-G5240 routers; Planex BRL-04R, BRL-04UR, and BRL-04CW routers; and Alpha Networks routers allows remote attackers to bypass authentication and modify settings via an xmlset_roodkcableoj28840ybtide User-Agent HTTP header, as exploited in the wild in October 2013.

Multiple SQL injection vulnerabilities in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allow remote attackers to execute arbitrary SQL commands via the password to (1) the login.authenticate function in share/lua/5.1/teamf1lualib/login.lua or (2) captivePortal.lua.

The runShellCmd function in systemCheck.htm in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) "Ping or Trace an IP Address" or (2) "Perform a DNS Lookup" section.