Security Onion Solutions Squert version 1.0.1 through 1.6.7 contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) vulnerability in .inc/callback.php that can result in execution of OS Commands. This attack appear to be exploitable via Web request to .inc/callback.php with the payload in the txdata parameter, used in tx()/transcript(), or the catdata parameter, used in cat(). This vulnerability appears to have been fixed in 1.7.0.

The package async-git before 1.13.2 are vulnerable to Command Injection via shell meta-characters (back-ticks). For example: git.reset('atouch HACKEDb')

All versions of package corenlp-js-interface are vulnerable to Command Injection via the main function.

Crestron TSW-1060, TSW-760, TSW-560, TSW-1060-NC, TSW-760-NC, and TSW-560-NC devices before 2.001.0037.001 allow unauthenticated remote code execution via command injection in Crestron Toolbox Protocol (CTP).

This affects the package total.js before 3.4.7. The issue occurs in the image.pipe and image.stream functions. The type parameter is used to build the command that is then executed using child_process.spawn. The issue occurs because child_process.spawn is called with the option shell set to true and because the type parameter is not properly sanitized.

All versions of package geojson2kml are vulnerable to Command Injection via the index.js file. PoC: var a =require("geojson2kml"); a("./","& touch JHU",function(){})

This affects all versions of package corenlp-js-prefab. The injection point is located in line 10 in 'index.js.' It depends on a vulnerable package 'corenlp-js-interface.' Vulnerability can be exploited with the following PoC:

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi.

Vivotek FD8136 devices allow Remote Command Injection, aka "another command injection vulnerability in our target device," a different issue than CVE-2018-14494. NOTE: The vendor has disputed this as a vulnerability and states that the issue does not cause a web server crash or have any other affect on it's performance

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.

An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.

WRH-733GBK and WRH-733GWH contain an improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in the telnet function. If a remote unauthenticated attacker sends a specially crafted request to the affected product, an arbitrary OS command may be executed.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.

An issue was discovered in the add function in Shenzhim AAPTJS 1.3.1 which allows attackers to execute arbitrary code via the filePath parameter.

The ASUSTOR ADM 3.1.0.RFQ3 NAS portal suffers from an unauthenticated remote code execution vulnerability in the portal/apis/aggrecate_js.cgi file by embedding OS commands in the 'script' parameter.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 1 of 46).

In systeminformation (npm package) before version 4.31.1 there is a command injection vulnerability. The problem was fixed in version 4.31.1 with a shell string sanitation fix.

D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution.

Insecure method vulnerability in the FPOLE.OCX 6.0.8450.0 ActiveX control in Microsoft Visual FoxPro 6.0 allows remote attackers to execute arbitrary programs by specifying them as an argument to the FoxDoCmd function.

PHKP version including commit 88fd9cfdf14ea4b6ac3e3967feea7bcaabb6f03b contains a Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in function pgp_exec() phkp.php:98 that can result in It is possible to manipulate gpg-keys or execute commands remotely. This attack appear to be exploitable via HKP-Api: /pks/lookup?search.

systeminformation is an npm package that provides system and OS information library for node.js. In systeminformation before version 4.26.2 there is a command injection vulnerability. Problem was fixed in version 4.26.2 with a shell string sanitation fix.

LG N1A1 NAS 3718.510 is affected by: Remote Command Execution. The impact is: execute arbitrary code (remote). The attack vector is: HTTP POST with parameters.

GIG Technology NV JumpScale Portal 7 version before commit 15443122ed2b1cbfd7bdefc048bf106f075becdb contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in method: notifySpaceModification; that can result in Improper validation of parameters results in command execution. This attack appear to be exploitable via Network connectivity, required minimal auth privileges (everyone can register an account). This vulnerability appears to have been fixed in After commit 15443122ed2b1cbfd7bdefc048bf106f075becdb.

An issue was discovered in multiple models of Axis IP Cameras. There is Shell Command Injection.

An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.

The vulnerability have been reported to affect earlier versions of QTS. If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. This issue affects: QNAP Systems Inc. Helpdesk versions prior to 3.0.3.

myStrom WiFi Switch V1 devices before 2.66 did not sanitize a parameter received from the cloud that was used in an OS command. Malicious servers were able to run operating system commands on the device.

Command Injection in PPGo_Jobs v2.8.0 allows remote attackers to execute arbitrary code via the 'AjaxRun()' function.

npm package systeminformation before version 4.30.5 is vulnerable to Prototype Pollution leading to Command Injection. The issue was fixed with a rewrite of shell sanitations to avoid prototyper pollution problems. The issue is fixed in version 4.30.5. If you cannot upgrade, be sure to check or sanitize service parameter strings that are passed to si.inetChecksite().

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.

Nootka 1.4.4 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

QQQ SYSTEMS version 2.24 allows an attacker to execute arbitrary commands via unspecified vectors.

Xinuos (formerly SCO) Openserver v5 and v6 allows attackers to execute arbitrary commands via shell metacharacters in outputform or toclevels parameter to cgi-bin/printbook.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. We have already fixed this vulnerability in the following versions: QTS 4.5.2.1566 Build 20210202 and later QTS 4.5.1.1495 Build 20201123 and later QTS 4.3.6.1620 Build 20210322 and later QTS 4.3.4.1632 Build 20210324 and later QTS 4.3.3.1624 Build 20210416 and later QTS 4.2.6 Build 20210327 and later QuTS hero h4.5.1.1491 build 20201119 and later

ssh2 is client and server modules written in pure JavaScript for node.js. In ssh2 before version 1.4.0 there is a command injection vulnerability. The issue only exists on Windows. This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. This is fixed in version 1.4.0.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_list_accounts.php. When parsing the username parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9736.

LXR version 1.0.0 to 2.3.0 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

MP Form Mail CGI eCommerce Edition Ver 2.0.13 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Security Onion Solutions Squert version 1.3.0 through 1.6.7 contains a CWE-78: Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) vulnerability in .inc/callback.php that can result in execution of OS Commands. This attack appear to be exploitable via Web request to .inc/callback.php with the payload in the data or obj parameters, used in autocat(). This vulnerability appears to have been fixed in 1.7.0.

C-DATA FD702XW-X-R430 v2.1.13_X001 was discovered to contain a command injection vulnerability via the va_cmd parameter in formlanipv6. This vulnerability allows attackers to execute arbitrary commands via a crafted HTTP request.

FileZen V3.0.0 to V4.2.1 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

The escapeshellarg function in ext/standard/exec.c in PHP before 5.4.42, 5.5.x before 5.5.26, and 5.6.x before 5.6.10 on Windows allows remote attackers to execute arbitrary OS commands via a crafted string to an application that accepts command-line arguments for a call to the PHP system function.

A command injection vulnerability was found in the web administration console in SoftNAS Cloud before 4.0.3. In particular, the snserv script did not sanitize the 'recentVersion' parameter from the snserv endpoint, allowing an unauthenticated attacker to execute arbitrary commands with root permissions.

OS command injection in the guest Wi-Fi settings feature in /cgi-bin/luci on Xiaomi R3P before 2.14.5, R3C before 2.12.15, R3 before 2.22.15, and R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with a manual subscription or unsubscription.

System command injection in logtable.php in TerraMaster TOS version 3.1.03 allows attackers to execute system commands via the "Event" parameter.