A stack-based buffer overflow in processCommandUploadSnapshot in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to cause denial of service or run arbitrary code as the root user.

Pengutronix barebox through 2019.08.1 has a remote buffer overflow in nfs_readlink_reply in net/nfs.c because a length field is directly used for a memcpy.

A heap overflow flaw was found in the Linux kernel, all versions 3.x.x and 4.x.x before 4.18.0, in Marvell WiFi chip driver. The vulnerability allows a remote attacker to cause a system crash, resulting in a denial of service, or execute arbitrary code. The highest threat with this vulnerability is with the availability of the system. If code execution occurs, the code will run with the permissions of root. This will affect both confidentiality and integrity of files on the system.

Memory corruption in PAN-OS 7.1.24 and earlier, PAN-OS 8.0.19 and earlier, PAN-OS 8.1.9 and earlier, and PAN-OS 9.0.3 and earlier will allow a remote, unauthenticated user to craft a message to Secure Shell Daemon (SSHD) and corrupt arbitrary memory.

A heap-based buffer overflow vulnerability was found in the Linux kernel, version kernel-2.6.32, in Marvell WiFi chip driver. A remote attacker could cause a denial of service (system crash) or, possibly execute arbitrary code, when the lbs_ibss_join_existing function is called after a STA connects to an AP.

CMD_SET_CONFIG_COUNTRY in the TP-Link Device Debug protocol in TP-Link Archer C1200 1.0.0 Build 20180502 rel.45702 and earlier is prone to a stack-based buffer overflow, which allows a remote attacker to achieve code execution or denial of service by sending a crafted payload to the listening server.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: rpc_lookup_reply.

In MatrixSSL 3.8.3 Open through 4.2.1 Open, the DTLS server mishandles incoming network messages leading to a heap-based buffer overflow of up to 256 bytes and possible Remote Code Execution in parseSSLHandshake in sslDecode.c. During processing of a crafted packet, the server mishandles the fragment length value provided in the DTLS message.

An issue was discovered in Das U-Boot through 2019.07. There is an unbounded memcpy with an unvalidated length at nfs_readlink_reply, in the "if" block after calculating the new path length.

Ricoh SP C250DN 1.05 devices allow denial of service (issue 2 of 3). Unauthenticated crafted packets to the IPP service will cause a vulnerable device to crash. A memory corruption has been identified in the way of how the embedded device parsed the IPP packets

D-Link DAP-1330_OSS-firmware_1.00b21 was discovered to contain a heap overflow via the devicename parameter in /goform/setDeviceSettings.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the lanip parameter in /goform/setNetworkLan.

An issue was discovered in Foxit PhantomPDF before 8.3.10. The application could be exposed to Heap Corruption due to data desynchrony when adding AcroForm.

In Xymon through 4.3.28, a stack-based buffer overflow vulnerability exists in the alert acknowledgment CGI tool because of   expansion in acknowledge.c.

Delta Electronics DeviceNet Builder 2.04 has a User Mode Write AV starting at image00400000+0x000000000017a45e.

Some Brother printers (such as the HL-L8360CDW v1.20) were affected by a heap buffer overflow vulnerability as the IPP service did not parse attribute names properly. This would allow an attacker to execute arbitrary code on the device.

In Xymon through 4.3.28, a buffer overflow vulnerability exists in the csvinfo CGI script. The overflow may be exploited by sending a crafted GET request that triggers an sprintf of the srcdb parameter.

In SweetScape 010 Editor 9.0.1, improper validation of arguments in the internal implementation of the StrCat function (provided by the scripting engine) allows an attacker to overwrite arbitrary memory, which could lead to code execution.

system.cgi on TRENDnet TV-IP110WN cameras has a buffer overflow caused by an inadequate source-length check before a strcpy operation in the respondAsp function. Attackers can exploit the vulnerability by using the languse parameter with a long string. This affects 1.2.2 build 28, 64, 65, and 68.

udp_gro_receive_segment in net/ipv4/udp_offload.c in the Linux kernel 5.x before 5.0.13 allows remote attackers to cause a denial of service (slab-out-of-bounds memory corruption) or possibly have unspecified other impact via UDP packets with a 0 payload, because of mishandling of padded packets, aka the "GRO packet of death" issue.

A buffer overflow in MailCarrier 2.51 allows remote attackers to execute arbitrary code via a long string, as demonstrated by SMTP RCPT TO, POP3 USER, POP3 LIST, POP3 TOP, or POP3 RETR.

njs through 0.3.1, used in NGINX, has a heap-based buffer overflow in Array.prototype.splice after a resize, related to njs_array_prototype_splice in njs/njs_array.c, because of njs_array_expand size mishandling.

njs through 0.3.1, used in NGINX, has a heap-based buffer overflow in Array.prototype.push after a resize, related to njs_array_prototype_push in njs/njs_array.c, because of njs_array_expand size mishandling.

BWA (aka Burrow-Wheeler Aligner) 0.7.17 r1198 has a Buffer Overflow via a long prefix that is mishandled in bns_fasta2bntseq and bns_dump at btnseq.c.

An out of bounds write is possible via a specially crafted packet in certain configurations of Proxygen due to improper handling of Base64 when parsing malformed binary content in Structured HTTP Headers. This issue affects versions of proxygen prior to v2019.07.22.00.

njs through 0.3.1, used in NGINX, has a heap-based buffer overflow in njs_function_native_call in njs/njs_function.c.

pubRsaDecryptSignedElementExt in MatrixSSL 4.0.1 Open, as used in Inside Secure TLS Toolkit, has a stack-based buffer overflow during X.509 certificate verification because of missing validation in psRsaDecryptPubExt in crypto/pubkey/rsa_pub.c.

Copying RTCP messages into the output buffer without checking the destination buffer size which could lead to a remote stack overflow. in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, QCM2150, QCS605, QM215, Rennell, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

UTCB object has a function pointer called by the reaper to deallocate its memory resources and this address can potentially be corrupted by stack overflow in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in MDM9205, MDM9650, QCS605, SA6155P, SC8180X, SDA845, SDM670, SDM710, SDM845, SDM850, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_80040af8 in /formWlanSetup. This vulnerability is triggered via a crafted POST request.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function sub_80046EB4 in /formSetPortTr. This vulnerability is triggered via a crafted POST request.

Out of bound write can happen due to lack of check of array index value while calculating it. in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

An issue was discovered in D-Link DIR-806 devices. There is a stack-based buffer overflow in function hnap_main at /htdocs/cgibin. The function will call sprintf without checking the length of strings in parameters given by HTTP header and can be controlled by users. And it finally leads to a stack-based buffer overflow via a special HTTP header.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_800462c4 in /formAdvFirewall. This vulnerability is triggered via a crafted POST request.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function sub_8003183C in /fromLogin. This vulnerability is triggered via a crafted POST request.

In PHP imagick extension in versions between 3.3.0 and 3.4.4, writing to an array of values in ImagickKernel::fromMatrix() function did not check that the address will be within the allocated array. This could lead to out of bounds write to memory if the function is called with the data controlled by untrusted party.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_80034d60 in /formStaticDHCP. This vulnerability is triggered via a crafted POST request.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_8004776c in /formVirtualServ. This vulnerability is triggered via a crafted POST request.

Tenda AC6 v15.03.05.09_multi was discovered to contain a stack overflow via the time parameter in the PowerSaveSet function.

Buffer overflow during SIB read when network configures complete sib list along with first and last segment of other SIB in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, SC8180X, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

BWA (aka Burrow-Wheeler Aligner) before 2019-01-23 has a stack-based buffer overflow in the bns_restore function in bntseq.c via a long sequence name in a .alt file.

D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_8004776c in /formVirtualApp. This vulnerability is triggered via a crafted POST request.

An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setVLAN allows attackers to execute arbitrary code on the system via a crafted post request.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka "Windows DHCP Client Remote Code Execution Vulnerability." This affects Windows 10, Windows 10 Servers.

Annke N48PBB (Network Video Recorder) products of version 3.4.106 build 200422 and prior are vulnerable to a stack-based buffer overflow, which allows an unauthorized remote attacker to execute arbitrary code with the same privileges as the server user (root).

Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Execution of code in TEE core (kernel) context. The component is: optee_os. The fixed version is: 3.4.0 and later.