A buffer overflow in the SMTP response service in MailCarrier 2.51 allows the attacker to execute arbitrary code remotely via a long HELP command, a related issue to CVE-2019-11395.

CODESYS V2.3 ENI server up to V3.2.2.24 has a Buffer Overflow.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected.

Symonics libmysofa 0.7 has an invalid write in readOHDRHeaderMessageDataLayout in hdf/dataobject.c.

In XS 9.0.0 in Moddable SDK OS180329, there is a heap-based buffer overflow in fxBeginHost in xsAPI.c when called from fxRunDefine in xsRun.c, as demonstrated by crafted JavaScript code to xst.

A vulnerability was determined in Zaher1307 tiny_web_server up to 8d77b1044a0ca3a5297d8726ac8aa2cf944d481b. This affects the function tiny_web_server/tiny.c of the file tiny_web_server/tiny.c of the component URL Handler. This manipulation causes out-of-bounds write. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

A memory corruption vulnerability in Objective Open CBOR Run-time (oocborrt) in versions before 2020-08-12 could allow an attacker to execute code via crafted Concise Binary Object Representation (CBOR) input to the cbor2json decoder. An uncaught error while decoding CBOR Major Type 3 text strings leads to the use of an attacker-controllable uninitialized stack value. This can be used to modify memory, causing a crash or potentially exploitable heap corruption.

An issue was discovered in py-lmdb 0.97. For certain values of md_flags, mdb_node_add does not properly set up a memcpy destination, leading to an invalid write operation. NOTE: this outcome occurs when accessing a data.mdb file supplied by an attacker.

There is a stack-overflow at ecma-regexp-object.c:535 in ecma_regexp_match in JerryScript 2.2.0.

An issue was discovered in py-lmdb 0.97. For certain values of mn_flags, mdb_cursor_set triggers a memcpy with an invalid write operation within mdb_xcursor_init1. NOTE: this outcome occurs when accessing a data.mdb file supplied by an attacker.

An issue was discovered in py-lmdb 0.97. For certain values of mp_flags, mdb_page_touch does not properly set up mc->mc_pg[mc->top], leading to an invalid write operation. NOTE: this outcome occurs when accessing a data.mdb file supplied by an attacker.

HT Editor 2.0.20 has a Remote Stack Buffer Overflow Vulnerability

Exim 4.92 through 4.92.2 allows remote code execution, a different vulnerability than CVE-2019-15846. There is a heap-based buffer overflow in string_vformat in string.c involving a long EHLO command.

An issue was discovered in Rsyslog v8.1908.0. contrib/pmaixforwardedfrom/pmaixforwardedfrom.c has a heap overflow in the parser for AIX log messages. The parser tries to locate a log message delimiter (in this case, a space or a colon) but fails to account for strings that do not satisfy this constraint. If the string does not match, then the variable lenMsg will reach the value zero and will skip the sanity check that detects invalid log messages. The message will then be considered valid, and the parser will eat up the nonexistent colon delimiter. In doing so, it will decrement lenMsg, a signed integer, whose value was zero and now becomes minus one. The following step in the parser is to shift left the contents of the message. To do this, it will call memmove with the right pointers to the target and destination strings, but the lenMsg will now be interpreted as a huge value, causing a heap overflow.

Memory corruption in PAN-OS 7.1.24 and earlier, PAN-OS 8.0.19 and earlier, PAN-OS 8.1.9 and earlier, and PAN-OS 9.0.3 and earlier will allow a remote, unauthenticated user to craft a message to Secure Shell Daemon (SSHD) and corrupt arbitrary memory.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. It is possible to cause an out-of-bounds write in versions of Contiki-NG prior to 4.6 when transmitting a 6LoWPAN packet with a chain of extension headers. Unfortunately, the written header is not checked to be within the available space, thereby making it possible to write outside the buffer. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

TightVNC code version 1.3.10 contains heap buffer overflow in rfbServerCutText handler, which can potentially result code execution.. This attack appear to be exploitable via network connectivity.

Pengutronix barebox through 2019.08.1 has a remote buffer overflow in nfs_readlink_req in fs/nfs.c because a length field is directly used for a memcpy.

A flaw was found with the RHSA-2019:3950 erratum, where it did not fix the CVE-2019-13616 SDL vulnerability. This issue only affects Red Hat SDL packages, SDL versions through 1.2.15 and 2.x through 2.0.9 has a heap-based buffer overflow flaw while copying an existing surface into a new optimized one, due to a lack of validation while loading a BMP image, is possible. An application that uses SDL to parse untrusted input files may be vulnerable to this flaw, which could allow an attacker to make the application crash or execute code.

TightVNC code version 1.3.10 contains heap buffer overflow in InitialiseRFBConnection function, which can potentially result code execution. This attack appear to be exploitable via network connectivity.

TurboVNC server code contains stack buffer overflow vulnerability in commit prior to cea98166008301e614e0d36776bf9435a536136e. This could possibly result into remote code execution, since stack frame is not protected with stack canary. This attack appear to be exploitable via network connectivity. To exploit this vulnerability authorization on server is required. These issues have been fixed in commit cea98166008301e614e0d36776bf9435a536136e.

An issue was discovered in the slice-deque crate before 0.2.0 for Rust. There is memory corruption in certain allocation cases.

Heap-based buffer overflow in the read_channel_data function in file-psp.c in the Paint Shop Pro (PSP) plugin in GIMP 2.6.11 allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a PSP_COMP_RLE (aka RLE compression) image file that begins a long run count at the end of the image. NOTE: some of these details are obtained from third party information.

The set_ipv4() function in zscan_rfc1035.rl in gdnsd 3.x before 3.2.1 has a stack-based buffer overflow via a long and malformed IPv4 address in zone data.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: rpc_lookup_reply.

An issue was discovered in Foxit PhantomPDF before 8.3.10. The application could be exposed to Heap Corruption due to data desynchrony when adding AcroForm.

The set_ipv6() function in zscan_rfc1035.rl in gdnsd before 2.4.3 and 3.x before 3.2.1 has a stack-based buffer overflow via a long and malformed IPv6 address in zone data.

webadmin.c in 3proxy before 0.8.13 has an out-of-bounds write in the admin interface.

The remote admin webserver on FANUC Robotics Virtual Robot Controller 8.23 has a Buffer Overflow via a forged HTTP request.

A DNS client stack-based buffer overflow in ipdnsc_decode_name() affects Wind River VxWorks 6.5 through 7. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

SnmpAdm.exe in MAPLE WBT SNMP Administrator v2.0.195.15 has an Unauthenticated Remote Buffer Overflow via a long string to the CE Remote feature listening on Port 987.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: nfs_mount_reply.

musl libc through 1.1.23 has an x87 floating-point stack adjustment imbalance, related to the math/i386/ directory. In some cases, use of this library could introduce out-of-bounds writes that are not present in an application's source code.

In MatrixSSL 3.8.3 Open through 4.2.1 Open, the DTLS server mishandles incoming network messages leading to a heap-based buffer overflow of up to 256 bytes and possible Remote Code Execution in parseSSLHandshake in sslDecode.c. During processing of a crafted packet, the server mishandles the fragment length value provided in the DTLS message.

An issue was discovered in Das U-Boot through 2019.07. There is an unbounded memcpy with a failed length check at nfs_read_reply when calling store_block in the NFSv2 case.

An issue was discovered in Das U-Boot through 2019.07. There is an unbounded memcpy with a failed length check at nfs_lookup_reply.

An issue was discovered in Das U-Boot through 2019.07. There is an unbounded memcpy when parsing a UDP packet due to a net_process_received_packet integer underflow during an nc_input_packet call.

A stack-based buffer overflow in the upnpd binary running on NETGEAR WNDR3400v3 routers with firmware version 1.0.1.18_1.0.63 allows an attacker to remotely execute arbitrary code via a crafted UPnP SSDP packet.

An issue was discovered in Marvell 88W8688 Wi-Fi firmware before version p52, as used on Tesla Model S/X vehicles manufactured before March 2018, via the Parrot Faurecia Automotive FC6050W module. A heap-based buffer overflow allows remote attackers to cause a denial of service or execute arbitrary code via malformed Wi-Fi packets.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: nfs_readlink_reply.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: nfs_umountall_reply.

formats/xml.cpp in Leanify 0.4.3 allows for a controlled out-of-bounds write in xml_memory_writer::write via characters that require escaping.

In Xymon through 4.3.28, a stack-based buffer overflow exists in the status-log viewer component because of   expansion in svcstatus.c.

Heap-based buffer overflow vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets.

In Xymon through 4.3.28, a stack-based buffer overflow vulnerability exists in the history viewer component via a long hostname or service parameter to history.c.

Stack-based overflow vulnerability in the logMess function in Open TFTP Server MT 1.65 and earlier allows remote attackers to perform a denial of service or execute arbitrary code via a long TFTP error packet, a different vulnerability than CVE-2018-10387 and CVE-2019-12568.

An issue was discovered in Mongoose before 6.15. The parse_mqtt() function in mg_mqtt.c has a critical heap-based buffer overflow.

In Xymon through 4.3.28, a buffer overflow vulnerability exists in the csvinfo CGI script. The overflow may be exploited by sending a crafted GET request that triggers an sprintf of the srcdb parameter.

Delta Electronics DeviceNet Builder 2.04 has a User Mode Write AV starting at image00400000+0x000000000017a45e.