Insufficiently Protected Credentials vulnerability in the remote backups application on Western Digital My Cloud devices that could allow an attacker who has gained access to a relevant endpoint to use that information to access protected data. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux.

Implemented protections on AWS credentials that were not properly protected.

Western Digital SanDisk SanDisk X300, X300s, X400, and X600 devices: The firmware update authentication method relies on a symmetric HMAC digest. The key used to validate this digest is present in a protected area of the device, and if extracted could be used to install arbitrary firmware to other devices.

Western Digital SanDisk X600 devices in certain configurations, a vulnerability in the access control mechanism of the drive may allow data to be decrypted without knowledge of proper authentication credentials.

calamares-nixos-extensions provides Calamares branding and modules for NixOS, a distribution of GNU/Linux. Users of calamares-nixos-extensions version 0.3.12 and prior who installed NixOS through the graphical calamares installer, with an unencrypted `/boot`, on either non-UEFI systems or with a LUKS partition different from `/` have their LUKS key file in `/boot` as a plaintext CPIO archive attached to their NixOS initrd. A patch is available and anticipated to be part of version 0.3.13 to backport to NixOS 22.11, 23.05, and unstable channels. Expert users who have a copy of their data may, as a workaround, re-encrypt the LUKS partition(s) themselves.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, and other configuration options in the file generated via the "export configuration" feature. The configuration file is encrypted using the awenc binary. The same binary can be used to decrypt any configuration file since all the encryption logic is hard coded. A local attacker can use this vulnerability to gain access to devices username and passwords.

Insufficiently protected credentials in the Intel(R) Team Blue mobile application in all versions may allow an authenticated user to potentially enable information disclosure via local access.

IBM Common Licensing 9.0 stores user credentials in plain clear text which can be read by a local user.

OpenClaw is a personal AI assistant. Telegram bot tokens can appear in error messages and stack traces (for example, when request URLs include `https://api.telegram.org/bot<token>/...`). Prior to version 2026.2.15, OpenClaw logged these strings without redaction, which could leak the bot token into logs, crash reports, CI output, or support bundles. Disclosure of a Telegram bot token allows an attacker to impersonate the bot and take over Bot API access. Users should upgrade to version 2026.2.15 to obtain a fix and rotate the Telegram bot token if it may have been exposed.

In JetBrains IntelliJ IDEA before 2021.3.3 it was possible to get passwords from protected fields

Lexiglot through 2014-11-20 allows local users to obtain sensitive information by listing a process because the username and password are on the command line.

IBM API Connect V10.0.5.3 and V10.0.6.0 stores user credentials in browser cache which can be read by a local user. IBM X-Force ID: 271912.

Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Windows

Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Linux

PingID Windows Login prior to 2.8 does not properly set permissions on the Windows Registry entries used to store sensitive API keys under some circumstances.

An issue was discovered in the C AMQP client library (aka rabbitmq-c) through 0.13.0 for RabbitMQ. Credentials can only be entered on the command line (e.g., for amqp-publish or amqp-consume) and are thus visible to local attackers by listing a process and its arguments.

An issue was discovered in Keeper Password Manager for Desktop version 16.10.2 (fixed in 17.2), and the KeeperFill Browser Extensions version 16.5.4 (fixed in 17.2), allows local attackers to gain sensitive information via plaintext password storage in memory after the user is already logged in, and may persist after logout. NOTE: the vendor disputes this for two reasons: the information is inherently available during a logged-in session when the attacker can read from arbitrary memory locations, and information only remains available after logout because of memory-management limitations of web browsers (not because the Keeper technology itself is retaining the information).

Dell EMC System Update, version 1.9.2 and prior, contain an Unprotected Storage of Credentials vulnerability. A local attacker with user privleges could potentially exploit this vulnerability leading to the disclosure of user passwords.

Dell DM5500 5.14.0.0, contain a Plain-text Password Storage Vulnerability in the appliance. A local attacker with privileges could potentially exploit this vulnerability, leading to the disclosure of certain service credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.

Jenkins Metrics Plugin 4.0.2.8 and earlier stores an access key unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

IBM Sterling Secure Proxy and IBM Sterling External Authentication Server 6.0.3 and 6.1.0 stores user credentials in plain clear text which can be read by a local user with container access. IBM X-Force ID: 255585.

A lack of password masking in Devolutions Remote Desktop Manager allows physically proximate attackers to observe sensitive data. A caching issue can cause sensitive fields to sometimes stay revealed when closing and reopening a panel, which could lead to involuntarily disclosing sensitive information. This issue affects: Devolutions Remote Desktop Manager 2022.1.24 version and prior versions.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

Ansible before 1.5.5 sets 0644 permissions for sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by reading a file that uses the "deb http://user:pass@server:port/" format.

An insufficiently protected credentials vulnerability exists in the Palo Alto Networks GlobalProtect app on Linux that exposes the hashed credentials of GlobalProtect users that saved their password during previous GlobalProtect app sessions to other local users on the system. The exposed credentials enable a local attacker to authenticate to the GlobalProtect portal or gateway as the target user without knowing of the target user’s plaintext password. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.10 on Linux. GlobalProtect app 5.2 versions earlier than and including GlobalProtect app 5.2.7 on Linux. GlobalProtect app 5.3 versions earlier than GlobalProtect app 5.3.2 on Linux. This issue does not affect the GlobalProtect app on other platforms.

Jenkins Publish Over SSH Plugin 1.22 and earlier stores password unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

SangforCSClient.exe in Sangfor VDI Client 5.4.2.1006 allows attackers, when they are able to read process memory, to discover the contents of the Username and Password fields.

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All Versions < V5.2.4), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.3), SCALANCE X-414-3E (All versions). The affected devices store passwords in a recoverable format. An attacker may extract and recover device passwords from the device configuration. Successful exploitation requires access to a device configuration backup and impacts confidentiality of the stored passwords.

An HPE OneView appliance dump may expose OneView user accounts

The Android mobile application BlueCats Reveal before 3.0.19 stores the username and password in a clear text file. This file persists until the user logs out or the session times out from non-usage (30 days of no user activity). This can allow an attacker to compromise the affected BlueCats network implementation. The attacker would first need to gain physical control of the Android device or compromise it with a malicious app.

The iOS mobile application BlueCats Reveal before 5.14 stores the username and password in the app cache as base64 encoded strings, i.e. clear text. These persist in the cache even if the user logs out. This can allow an attacker to compromise the affected BlueCats network implementation. The attacker would first need to gain physical control of the iOS device or compromise it with a malicious app.

An HPE OneView appliance dump may expose SNMPv3 read credentials

IBM QRadar SIEM 7.3.0 through 7.3.3 uses weak credential storage in some instances which could be decrypted by a local attacker. IBM X-Force ID: 164429.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 160987.

CloudForms stores user passwords in recoverable format

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 stores user credentials in plain in clear text which can be read by a local privileged user. IBM X-Force ID: 171831.

SnapGathers versions prior to 4.9 are susceptible to a vulnerability which could allow a local authenticated attacker to discover plaintext domain user credentials

IBM Spectrum Protect Plus 10.1.2 may display the vSnap CIFS password in the IBM Spectrum Protect Plus Joblog. This can result in an attacker gaining access to sensitive information as well as vSnap. IBM X-Force ID: 162173.

IBM UrbanCode Deploy (UCD) 7.0.4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171250.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 247601.

The insufficiently protected credentials vulnerability in the CLI command of the USG FLEX H series uOS firmware version V1.21 and earlier versions could allow an authenticated local attacker to gain privilege escalation by stealing the authentication token of a login administrator. Note that this attack could be successful only if the administrator has not logged out.

eyeDisk implements the unlock feature by sending a cleartext password. The password can be discovered by sniffing USB traffic or by sending a 06 05 52 41 01 b0 00 00 00 00 00 00 SCSI command.

IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.

IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465.

Cloud Foundry CredHub CLI, versions prior to 2.2.1, inadvertently writes authentication credentials provided via environment variables to its persistent config file. A local authenticated malicious user with access to the CredHub CLI config file can use these credentials to retrieve and modify credentials stored in CredHub that are authorized to the targeted user.