An Unprotected Storage of Credentials vulnerability in the identity and access management certificate generation procedure allows a local attacker to gain access to confidential information. This issue affects: Juniper Networks SBR Carrier: 8.4.1 versions prior to 8.4.1R13; 8.5.0 versions prior to 8.5.0R4.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a locally authenticated user. IBM X-Force ID: 208154.

A vulnerability has been found in CESNET theme-cesnet up to 1.x on ownCloud and classified as problematic. Affected by this vulnerability is an unknown functionality of the file cesnet/core/lostpassword/templates/resetpassword.php. The manipulation leads to insufficiently protected credentials. Attacking locally is a requirement. Upgrading to version 2.0.0 is able to address this issue. The identifier of the patch is 2b857f2233ce5083b4d5bc9bfc4152f933c3e4a6. It is recommended to upgrade the affected component. The identifier VDB-217633 was assigned to this vulnerability.

A credentials leak flaw was found in OpenStack Barbican. This flaw allows a local authenticated attacker to read the configuration file, gaining access to sensitive credentials.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a local attacker to obtain information due to the autocomplete feature on password input fields. IBM X-Force ID: 214345.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 stores user credentials in plain clear text which can be read by a local user. X-Force ID: 212781.

In Rapid Software LLC's Rapid SCADA versions prior to Version 5.8.4, the affected product stores plaintext credentials in various places. This may allow an attacker with local access to see them.

IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.

A vulnerability in the web-based management interface of Cisco ATA 190 Series Multiplatform Analog Telephone Adapter firmware could allow an authenticated, local attacker with low privileges to view passwords on an affected device. This vulnerability is due to incorrect sanitization of HTML content from an affected device. A successful exploit could allow the attacker to view passwords that belong to other users.

Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2.

A vulnerability in the storage method of the PON Controller configuration file could allow an authenticated, local attacker with low privileges to obtain the MongoDB credentials. This vulnerability is due to improper storage of the unencrypted database credentials on the device that is running Cisco IOS XR Software. An attacker could exploit this vulnerability by accessing the configuration files on an affected system. A successful exploit could allow the attacker to view MongoDB credentials.

SnapGathers versions prior to 4.9 are susceptible to a vulnerability which could allow a local authenticated attacker to discover plaintext domain user credentials

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.9 a form contains a password field with autocomplete enabled. The stored credentials can be captured by an attacker who gains control over the user's computer. Therefore the user must have logged in at least once.

A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.

The IBM Security Access Manager appliance includes configuration files that contain obfuscated plaintext-passwords which authenticated users can access.

IBM Common Licensing 9.0 stores user credentials in plain clear text which can be read by a local user.

IBM API Connect V10.0.5.3 and V10.0.6.0 stores user credentials in browser cache which can be read by a local user. IBM X-Force ID: 271912.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

Tauri is a framework for building binaries for all major desktop platforms. This advisory is not describing a vulnerability in the Tauri code base itself but a commonly used misconfiguration which could lead to leaking of the private key and updater key password into bundled Tauri applications using the Vite frontend in a specific configuration. The Tauri documentation used an insecure example configuration in the `Vite guide` to showcase how to use Tauri together with Vite. Copying the following snippet `envPrefix: ['VITE_', 'TAURI_'],` from this guide into the `vite.config.ts` of a Tauri project leads to bundling the `TAURI_PRIVATE_KEY` and `TAURI_KEY_PASSWORD` into the Vite frontend code and therefore leaking this value to the released Tauri application. Using the `envPrefix: ['VITE_'],` or any other framework than Vite means you are not impacted by this advisory. Users are advised to rotate their updater private key if they are affected by this (requires Tauri CLI >=1.5.5). After updating the envPrefix configuration, generate a new private key with `tauri signer generate`, saving the new private key and updating the updater's `pubkey` value on `tauri.conf.json` with the new public key. To update your existing application, the next application build must be signed with the older private key in order to be accepted by the existing application.

A password is exposed locally.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, user account passwords set in clear text could leak to users without any password. This issue affects: Arista Metamako Operating System MOS-0.18 and post releases in the MOS-0.1x train All releases in the MOS-0.2x train MOS-0.31.1 and prior releases in the MOS-0.3x train

Previous releases of the Puppet cisco_ios module output SSH session debug information including login credentials to a world readable file on every run. These issues have been resolved in the 0.4.0 release.

Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Linux

Dell DM5500 5.14.0.0, contain a Plain-text Password Storage Vulnerability in the appliance. A local attacker with privileges could potentially exploit this vulnerability, leading to the disclosure of certain service credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.

The Tableau integration in RSA Archer 6.4 P1 (6.4.0.1) through 6.9 P2 (6.9.0.2) is affected by an insecure credential storage vulnerability. An malicious attacker with access to the Tableau workbook file may obtain access to credential information to use it in further attacks.

Insufficiently protected credentials in the Intel(R) EMA before version 1.3.3 may allow an authorized user to potentially enable information disclosure via local access.

A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

Ansible before 1.5.5 sets 0644 permissions for sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by reading a file that uses the "deb http://user:pass@server:port/" format.

rubygem-hammer_cli_foreman: File /etc/hammer/cli.modules.d/foreman.yml world readable

Insufficiently Protected Credentials vulnerability exists in EcoStruxure Control Expert (all versions prior to V15.0 SP1, including all versions of Unity Pro), EcoStruxure Process Expert (all versions, including all versions of EcoStruxure Hybrid DCS), and SCADAPack RemoteConnect for x70, all versions, that could cause a leak of SMTP credential used for mailbox authentication when an attacker can access a project file.

calamares-nixos-extensions provides Calamares branding and modules for NixOS, a distribution of GNU/Linux. Users of calamares-nixos-extensions version 0.3.12 and prior who installed NixOS through the graphical calamares installer, with an unencrypted `/boot`, on either non-UEFI systems or with a LUKS partition different from `/` have their LUKS key file in `/boot` as a plaintext CPIO archive attached to their NixOS initrd. A patch is available and anticipated to be part of version 0.3.13 to backport to NixOS 22.11, 23.05, and unstable channels. Expert users who have a copy of their data may, as a workaround, re-encrypt the LUKS partition(s) themselves.

Jenkins Bumblebee HP ALM Plugin 4.1.5 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

Jenkins Nomad Plugin 0.7.4 and earlier stores Docker passwords unencrypted in the global config.xml file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

Jenkins TraceTronic ECU-TEST Plugin 2.23.1 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

CloudForms stores user passwords in recoverable format

A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.

PFX Encryption Security Feature Bypass Vulnerability

A vulnerability in the storage of proxy server credentials of Cisco Firepower Management Center (FMC) could allow an authenticated, local attacker to view credentials for a configured proxy server. The vulnerability is due to clear-text storage and weak permissions of related configuration files. An attacker could exploit this vulnerability by accessing the CLI of the affected software and viewing the contents of the affected files. A successful exploit could allow the attacker to view the credentials that are used to access the proxy server.

Insufficiently protected credentials in the Intel(R) ON Event Series Android application before version 2.0 may allow an authenticated user to potentially enable information disclosure via local access.

The insufficiently protected credentials vulnerability in the CLI command of the USG FLEX H series uOS firmware version V1.21 and earlier versions could allow an authenticated local attacker to gain privilege escalation by stealing the authentication token of a login administrator. Note that this attack could be successful only if the administrator has not logged out.

In PACTware before 4.1 SP6 and 5.x before 5.0.5.31, passwords are stored in a recoverable format, and may be retrieved by any user with access to the PACTware workstation.

This issue was addressed with additional entitlement checks. This issue is fixed in macOS Sonoma 14.7.1, macOS Ventura 13.7.1. A malicious application may be able to leak a user's credentials.

Local registry credentials were included directly in the CD4PE deployment definition, which could expose these credentials to users who should not have access to them. This is resolved in Continuous Delivery for Puppet Enterprise 4.0.1.

An HPE OneView appliance dump may expose proxy credential settings

MikroTik WinBox 3.22 and below stores the user's cleartext password in the settings.cfg.viw configuration file when the Keep Password field is set and no Master Password is set. Keep Password is set by default and, by default Master Password is not set. An attacker with access to the configuration file can extract a username and password to gain access to the router.

An HPE OneView appliance dump may expose OneView user accounts

An HPE OneView appliance dump may expose SNMPv3 read credentials

HPE OneView and HPE OneView Global Dashboard appliance dumps may expose authentication tokens