OpenClaw is a personal AI assistant. Prior to version 2026.2.15, in some shared-agent deployments, OpenClaw session tools (`sessions_list`, `sessions_history`, `sessions_send`) allowed broader session targeting than some operators intended. This is primarily a configuration/visibility-scoping issue in multi-user environments where peers are not equally trusted. In Telegram webhook mode, monitor startup also did not fall back to per-account `webhookSecret` when only the account-level secret was configured. In shared-agent, multi-user, less-trusted environments: session-tool access could expose transcript content across peer sessions. In single-agent or trusted environments, practical impact is limited. In Telegram webhook mode, account-level secret wiring could be missed unless an explicit monitor webhook secret override was provided. Version 2026.2.15 fixes the issue.

MikroTik WinBox 3.22 and below stores the user's cleartext password in the settings.cfg.viw configuration file when the Keep Password field is set and no Master Password is set. Keep Password is set by default and, by default Master Password is not set. An attacker with access to the configuration file can extract a username and password to gain access to the router.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, and 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184157.

Insufficiently protected credentials in the Intel(R) Team Blue mobile application in all versions may allow an authenticated user to potentially enable information disclosure via local access.

CloudForms stores user passwords in recoverable format

An issue was discovered in Keeper Password Manager for Desktop version 16.10.2 (fixed in 17.2), and the KeeperFill Browser Extensions version 16.5.4 (fixed in 17.2), allows local attackers to gain sensitive information via plaintext password storage in memory after the user is already logged in, and may persist after logout. NOTE: the vendor disputes this for two reasons: the information is inherently available during a logged-in session when the attacker can read from arbitrary memory locations, and information only remains available after logout because of memory-management limitations of web browsers (not because the Keeper technology itself is retaining the information).

calamares-nixos-extensions provides Calamares branding and modules for NixOS, a distribution of GNU/Linux. Users of calamares-nixos-extensions version 0.3.12 and prior who installed NixOS through the graphical calamares installer, with an unencrypted `/boot`, on either non-UEFI systems or with a LUKS partition different from `/` have their LUKS key file in `/boot` as a plaintext CPIO archive attached to their NixOS initrd. A patch is available and anticipated to be part of version 0.3.13 to backport to NixOS 22.11, 23.05, and unstable channels. Expert users who have a copy of their data may, as a workaround, re-encrypt the LUKS partition(s) themselves.

Unprotected Storage of Credentials vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 allows local users to gain access to the video streaming username and password via SQLite files containing plain text credentials.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a local attacker to obtain information due to the autocomplete feature on password input fields. IBM X-Force ID: 214345.

Rockwell Automation ISaGRAF Runtime Versions 4.x and 5.x stores the password in plaintext in a file that is in the same directory as the executable file. ISaGRAF Runtime reads the file and saves the data in a variable without any additional modification. A local, unauthenticated attacker could compromise the user passwords, resulting in information disclosure.

Dell EMC System Update, version 1.9.2 and prior, contain an Unprotected Storage of Credentials vulnerability. A local attacker with user privleges could potentially exploit this vulnerability leading to the disclosure of user passwords.

IBM Sterling Secure Proxy and IBM Sterling External Authentication Server 6.0.3 and 6.1.0 stores user credentials in plain clear text which can be read by a local user with container access. IBM X-Force ID: 255585.

Jenkins Zephyr Enterprise Test Management Plugin 1.9.1 and earlier stores its Zephyr password in plain text on the Jenkins master file system.

The insufficiently protected credentials vulnerability in the CLI command of the USG FLEX H series uOS firmware version V1.21 and earlier versions could allow an authenticated local attacker to gain privilege escalation by stealing the authentication token of a login administrator. Note that this attack could be successful only if the administrator has not logged out.

Multiple Rangee GmbH RangeeOS 8.0.4 modules store credentials in plaintext including credentials of users for several external facing administrative services, domain joined users, and local administrators. To exploit the vulnerability a local attacker must have access to the underlying operating system.

A flaw was found in Ansible Galaxy Collections. When collections are built manually, any files in the repository directory that are not explicitly excluded via the ``build_ignore`` list in "galaxy.yml" include files in the ``.tar.gz`` file. This contains sensitive info, such as the user's Ansible Galaxy API key and any secrets in ``ansible`` or ``ansible-playbook`` verbose output without the``no_log`` redaction. Currently, there is no way to deprecate a Collection Or delete a Collection Version. Once published, anyone who downloads or installs the collection can view the secrets.

MySQL-GUI-tools (mysql-administrator) leaks passwords into process list after with launch of mysql text console

HPE OneView and HPE OneView Global Dashboard appliance dumps may expose authentication tokens

A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.

SnapGathers versions prior to 4.9 are susceptible to a vulnerability which could allow a local authenticated attacker to discover plaintext domain user credentials

An HPE OneView appliance dump may expose OneView user accounts

An HPE OneView appliance dump may expose SNMPv3 read credentials

An HPE OneView appliance dump may expose proxy credential settings

A flaw was found in the GNOME Control Center in Red Hat Enterprise Linux 8 versions prior to 8.2, where it improperly uses Red Hat Customer Portal credentials when a user registers a system through the GNOME Settings User Interface. This flaw allows a local attacker to discover the Red Hat Customer Portal password. The highest threat from this vulnerability is to confidentiality.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

GGLocker iOS application, contains an insecure data storage of the password hash value which results in an authentication bypass.

A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.

A unprotected storage of credentials in Fortinet FortiSIEM Windows Agent version 4.1.4 and below allows an authenticated user to disclosure agent password due to plaintext credential storage in log files

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 stores user credentials in plain clear text which can be read by a local user. X-Force ID: 212781.

IBM Host Access Transformation Services (HATS) 9.6 through 9.6.1.4 and 9.7 through 9.7.0.3 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 210989.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 247601.

The Tableau integration in RSA Archer 6.4 P1 (6.4.0.1) through 6.9 P2 (6.9.0.2) is affected by an insecure credential storage vulnerability. An malicious attacker with access to the Tableau workbook file may obtain access to credential information to use it in further attacks.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, user account passwords set in clear text could leak to users without any password. This issue affects: Arista Metamako Operating System MOS-0.18 and post releases in the MOS-0.1x train All releases in the MOS-0.2x train MOS-0.31.1 and prior releases in the MOS-0.3x train

This issue was addressed with additional entitlement checks. This issue is fixed in macOS Sonoma 14.7.1, macOS Ventura 13.7.1. A malicious application may be able to leak a user's credentials.

The backup function in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway saves the current settings and configuration of the application, including credentials of existing user accounts and other configuration's credentials in plaintext.

Redpanda before 22.3.12 discloses cleartext AWS credentials. The import functionality in the rpk binary logs an AWS Access Key ID and Secret in cleartext to standard output, allowing a local user to view the key in the console, or in Kubernetes logs if stdout output is collected. The fixed versions are 22.3.12, 22.2.10, and 22.1.12.

HCL Traveler for Microsoft Outlook (HTMO) is susceptible to a credential leakage which could allow an attacker to access other computers or applications.

IBM Cognos Analytics 11.2.0, 11.2.1, 11.2.2, 11.2.3, 11.2.4, 12.0.0, 12.0.1, 12.0.2, 12.0.3, and IBM Cognos Analytics Reports for iOS 11.0.0.7 could allow a local attacker to obtain sensitive information in the form of an API key. An attacker could use this information to launch further attacks against affected applications.

IBM Datacap Navigator 9.1.5, 9.1.6, 9.1.7, 9.1.8, and 9.1.9 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 295972.

An attacker with physical access to the host can extract the secrets from the registry and create valid JWT tokens for the Fresenius Kabi Vigilant MasterMed version 2.0.1.3 application and impersonate arbitrary users. An attacker could manipulate RabbitMQ queues and messages by impersonating users.

A vulnerability has been identified in SINEC Traffic Analyzer (6GK8822-1BG01-0BA0) (All versions < V1.2). The affected web server stored the password in cleartext. This could allow attacker in a privileged position to obtain access passwords.

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All Versions < V5.2.4), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.3), SCALANCE X-414-3E (All versions). The affected devices store passwords in a recoverable format. An attacker may extract and recover device passwords from the device configuration. Successful exploitation requires access to a device configuration backup and impacts confidentiality of the stored passwords.

Jenkins Beaker Builder Plugin 1.9 and earlier stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

Claws Mail vCalendar plugin: credentials exposed on interface

Azure Identity Library for .NET Information Disclosure Vulnerability

IBM UrbanCode Deploy (UCD) 7.0.4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171250.

IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465.

IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.

IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.