A potential incorrect privilege assignment vulnerability exists in the 3rd party pairing mechanism of the Bosch Smart Home Controller (SHC) before 9.8.907 that may result in a restricted app obtaining default app permissions. In order to exploit the vulnerability, the adversary needs to have successfully paired an app, which requires user interaction.

This vulnerability could allow an attacker to hijack a session while a user is logged in the configuration web page. This vulnerability was discovered by a security researcher in B426 and found during internal product tests in B426-CN/B429-CN, and B426-M and has been fixed already starting from version 3.08 on, which was released on June 2019.

A potential incorrect privilege assignment vulnerability exists in the app pairing mechanism of the Bosch Smart Home Controller (SHC) before 9.8.905 that may result in elevated privileges of the adversary's choosing. In order to exploit the vulnerability, the adversary needs physical access to the SHC during the attack.

A vulnerability in the web-based interface allows an unauthenticated remote attacker to trigger actions on an affected system on behalf of another user (CSRF - Cross Site Request Forgery). This requires the victim to be tricked into clicking a malicious link or opening a malicious website while being logged in into the camera.

A vulnerability in the web-based management interface of Bosch PRAESIDEO until and including version 4.41 and Bosch PRAESENSA until and including version 1.10 allows an unauthenticated remote attacker to trigger actions on an affected system on behalf of another user (Cross-Site Request Forgery). This requires the victim to be tricked into clicking a malicious link or submitting a malicious form. A successful exploit allows the attacker to perform arbitrary actions with the privileges of the victim, e.g. creating and modifying user accounts, changing system configuration settings and cause DoS conditions. Note: For Bosch PRAESIDEO 4.31 and newer and Bosch PRAESENSA in all versions, the confidentiality impact is considered low because user credentials are not shown in the web interface.

A potential improper access control vulnerability exists in the JSON-RPC interface of the Bosch Smart Home Controller (SHC) before 9.8.905 that may result in a successful denial of service of the SHC and connected sensors and actuators. In order to exploit the vulnerability, the adversary needs to have successfully paired an app or service, which requires user interaction.

An unauthenticated attacker can achieve unauthorized access to sensitive data by exploiting Windows SMB protocol on a client installation. With Bosch Access Professional Edition (APE) 3.8, client installations need to be authorized by the APE administrator.

A potential improper access control vulnerability exists in the backup mechanism of the Bosch Smart Home Controller (SHC) before 9.8.905 that may result in unauthorized download of a backup. In order to exploit the vulnerability, the adversary needs to download the backup directly after a backup triggered by a legitimate user has been completed.

An Improper Access Control vulnerability allows an attacker to access the control panel of the B420 without requiring any sort of authorization or authentication due to the IP based authorization. If an authorized user has accessed a publicly available B420 product using valid credentials, an insider attacker can gain access to the same panel without requiring any sort of authorization. The B420 module was already obsolete at the time this vulnerability was found (The End of Life announcement was made in 2013).

Improper Access Control in the Kiosk Mode functionality of Bosch Recording Station allows a local unauthenticated attacker to escape from the Kiosk Mode and access the underlying operating system.

An information disclosure vulnerability was discovered in Bosch IP camera devices allowing an unauthenticated attacker to retrieve information (like capabilities) about the device itself and network settings of the device, disclosing possibly internal network settings if the device is connected to the internet.

GE Communicator, all versions prior to 4.0.517, has a service running with system privileges that may allow an unprivileged user to perform certain administrative actions, which may allow the execution of scheduled scripts with system administrator privileges. This service is inaccessible to attackers if Windows default firewall settings are used by the end user.

The icmp_check_sysrq function in net/ipv4/icmp.c in the kernel.org projects/rt patches for the Linux kernel, as used in the kernel-rt package before 3.10.0-327.22.1 in Red Hat Enterprise Linux for Real Time 7 and other products, allows remote attackers to execute SysRq commands via crafted ICMP Echo Request packets, as demonstrated by a brute-force attack to discover a cookie, or an attack that occurs after reading the local icmp_echo_sysrq file.

The convert extension in Mercurial before 3.8 might allow context-dependent attackers to execute arbitrary code via a crafted git repository name.

Unitronics VisiLogic OPLC IDE before 9.8.02 does not properly restrict access to ActiveX controls, which allows remote attackers to have an unspecified impact via a crafted web site.

coders/psd.c in ImageMagick allows remote attackers to have unspecified impact via a crafted psd file.

The default configuration of IBM WebSphere Application Server (WAS) 7.0.0 before 7.0.0.39, 8.0.0 before 8.0.0.11, and 8.5 before 8.5.5.6 has a false value for the com.ibm.ws.webcontainer.disallowServeServletsByClassname WebContainer property, which allows remote attackers to obtain privileged access via unspecified vectors.

coders/xpm.c in ImageMagick allows remote attackers to have unspecified impact via a crafted xpm file.

coders/wpg.c in ImageMagick allows remote attackers to have unspecified impact via a corrupted wpg file.

coders/sun.c in ImageMagick allows remote attackers to have unspecified impact via a corrupted sun file.

An incorrect implementation of a local web server in eID client (Windows version before 3.1.2, Linux version before 3.0.3) allows remote attackers to execute arbitrary code (.cgi, .pl, or .php) or delete arbitrary files via a crafted HTML page. This is a product from the Ministry of Interior of the Slovak Republic.

A vulnerability has been identified in Mendix Forgot Password Appstore module (All versions >= V3.3.0 < V3.5.1). In certain configurations of the affected product, a threat actor could use the sign up flow to hijack arbitrary user accounts.

A vulnerability in SonicWall Global Management System (GMS), allow a remote user to gain access to the appliance using existing SSH key. This vulnerability affects GMS versions 9.1, 9.0, 8.7, 8.6, 8.4, 8.3 and earlier.

The default configuration in Elasticsearch before 1.2 enables dynamic scripting, which allows remote attackers to execute arbitrary MVEL expressions and Java code via the source parameter to _search. NOTE: this only violates the vendor's intended security policy if the user does not run Elasticsearch in its own independent virtual machine.

Mozilla Firefox before 34.0 and SeaMonkey before 2.31 provide stylesheets with an incorrect primary namespace, which allows remote attackers to bypass intended access restrictions via an XBL binding.

Users Account Pre-Takeover or Users Account Takeover. in GitHub repository microweber/microweber prior to 1.2.15. Victim Account Take Over. Since, there is no email confirmation, an attacker can easily create an account in the application using the Victim’s Email. This allows an attacker to gain pre-authentication to the victim’s account. Further, due to the lack of proper validation of email coming from Social Login and failing to check if an account already exists, the victim will not identify if an account is already existing. Hence, the attacker’s persistence will remain. An attacker would be able to see all the activities performed by the victim user impacting the confidentiality and attempt to modify/corrupt the data impacting the integrity and availability factor. This attack becomes more interesting when an attacker can register an account from an employee’s email address. Assuming the organization uses G-Suite, it is much more impactful to hijack into an employee’s account.

An access-control flaw was found in the Octavia service when the cloud platform was deployed using Red Hat OpenStack Platform Director. An attacker could cause new amphorae to run based on any arbitrary image. This meant that a remote attacker could upload a new amphorae image and, if requested to spawn new amphorae, Octavia would then pick up the compromised image.

Dogtag PKI, through version 10.6.1, has a vulnerability in AAclAuthz.java that, under certain configurations, causes the application of ACL allow and deny rules to be reversed. If a server is configured to process allow rules before deny rules (authz.evaluateOrder=allow,deny), then allow rules will deny access and deny rules will grant access. This may result in an escalation of privileges or have other unintended consequences.

The NotificationBroadcastReceiver class in the com.android.phone process in Google Android 4.1.1 through 4.4.2 allows attackers to bypass intended access restrictions and consequently make phone calls to arbitrary numbers, send mmi or ussd codes, or hangup ongoing calls via a crafted application.

Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID.

sociomantic-tsunami git-hub before 0.10.3 allows remote attackers to execute arbitrary code via a crafted repository URL.

Unspecified vulnerability in the MySQL Connector component 2.1.3 and earlier and 2.0.4 and earlier in Oracle MySQL allows remote attackers to affect confidentiality, integrity, and availability via vectors related to Connector/Python.

A remote code execution vulnerability in an Android runtime library in Android 4.x before 4.4.4, 5.0.x before 5.0.2, 5.1.x before 5.1.1, and 6.x before 2016-11-01 could enable an attacker using a specially crafted payload to execute arbitrary code in the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses the Android runtime. Android ID: A-30765246.

Mozilla Firefox before 49.0 allows remote attackers to bypass the Same Origin Policy via a crafted fragment identifier in the SRC attribute of an IFRAME element, leading to insufficient restrictions on link-color information after a document is resized.

A remote code execution vulnerability in libskia in Android 7.0 before 2016-11-01 could enable an attacker using a specially crafted file to cause memory corruption during media file and data processing. This issue is rated as High due to the possibility of remote code execution within the context of the gallery process. Android ID: A-30190637.

LINE for Windows before 4.8.3 allows man-in-the-middle attackers to execute arbitrary code.

The mozilla::a11y::HyperTextAccessible::GetChildOffset function in the accessibility implementation in Mozilla Firefox before 49.0 allows remote attackers to execute arbitrary code via a crafted web site.

The PDF plugin in Google Chrome prior to 55.0.2883.75 for Mac, Windows and Linux, and 55.0.2883.84 for Android incorrectly followed redirects, which allowed a remote attacker to bypass the Same Origin Policy via a crafted HTML page.

The forEachForBinding function in WebKit/Source/bindings/core/v8/Iterable.h in the V8 bindings in Blink, as used in Google Chrome before 50.0.2661.102, uses an improper creation context, which allows remote attackers to bypass the Same Origin Policy via a crafted web site.

The FrameLoader::startLoad function in WebKit/Source/core/loader/FrameLoader.cpp in Blink, as used in Google Chrome before 51.0.2704.79, does not prevent frame navigations during DocumentLoader detach operations, which allows remote attackers to bypass the Same Origin Policy via crafted JavaScript code.

extensions/renderer/resources/binding.js in the extension bindings in Google Chrome before 51.0.2704.63 does not properly use prototypes, which allows remote attackers to bypass the Same Origin Policy via unspecified vectors.

FirstUseAuthenticator is a JupyterHub authenticator that helps new users set their password on their first login to JupyterHub. When JupyterHub is used with FirstUseAuthenticator, a vulnerability in versions prior to 1.0.0 allows unauthorized access to any user's account if `create_users=True` and the username is known or guessed. One may upgrade to version 1.0.0 or apply a patch manually to mitigate the vulnerability. For those who cannot upgrade, there is no complete workaround, but a partial mitigation exists. One can disable user creation with `c.FirstUseAuthenticator.create_users = False`, which will only allow login with fully normalized usernames for already existing users prior to jupyterhub-firstuserauthenticator 1.0.0. If any users have never logged in with their normalized username (i.e. lowercase), they will still be vulnerable until a patch or upgrade occurs.

The ReadVIFFImage function in coders/viff.c in ImageMagick before 7.0.1-0 allows remote attackers to cause a denial of service (application crash) or have other unspecified impact via a crafted file.

Cloudera Manager through 5.15 has Incorrect Access Control.

Heimdal, as used in Apple OS X before 10.11, allows remote attackers to conduct replay attacks against the SMB server via packet data that represents a Kerberos authenticated request.

Multiple clientless SSL VPN products that run in web browsers, including Stonesoft StoneGate; Cisco ASA; SonicWALL E-Class SSL VPN and SonicWALL SSL VPN; SafeNet SecureWire Access Gateway; Juniper Networks Secure Access; Nortel CallPilot; Citrix Access Gateway; and other products, when running in configurations that do not restrict access to the same domain as the VPN, retrieve the content of remote URLs from one domain and rewrite them so they originate from the VPN's domain, which violates the same origin policy and allows remote attackers to conduct cross-site scripting attacks, read cookies that originated from other domains, access the Web VPN session to gain access to internal resources, perform key logging, and conduct other attacks. NOTE: it could be argued that this is a fundamental design problem in any clientless VPN solution, as opposed to a commonly-introduced error that can be fixed in separate implementations. Therefore a single CVE has been assigned for all products that have this design

Cross-domain vulnerability in Microsoft Internet Explorer 5.01 SP4, 6, and 7 allows remote attackers to access restricted information from other domains via JavaScript that uses the Object data type for the value of a (1) location or (2) location.href property, related to incorrect determination of the origin of web script, aka "Window Location Property Cross-Domain Vulnerability." NOTE: according to Microsoft, CVE-2008-2948 and CVE-2008-2949 are duplicates of this issue, probably different attack vectors.

Adobe Genuine Service version 6.6 (and earlier) is affected by an Improper Access control vulnerability when handling symbolic links. An unauthenticated attacker could exploit this to elevate privileges in the context of the current user.

A CWE-284 Improper Access Control vulnerability exists in SCADAPack 7x Remote Connect (V3.6.3.574 and prior) which allows an attacker to place executables in a specific folder and run code whenever RemoteConnect is executed by the user.

A remote code execution vulnerability in the Framesequence library could enable an attacker using a specially crafted file to execute arbitrary code in the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses the Framesequence library. Product: Android. Versions: 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0. Android ID: A-31631842.