The web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote attackers to execute arbitrary code as root via a crafted HTTP request, aka Bug ID CSCux82428.

cPanel before 11.54.0.0 allows unauthenticated arbitrary code execution via DNS NS entry poisoning (SEC-64).

The Publish Service in FlexPaper (later renamed FlowPaper) 2.3.6 allows remote code execution via setup.php and change_config.php.

qdrant/qdrant version 1.9.0-dev is vulnerable to arbitrary file read and write during the snapshot recovery process. Attackers can exploit this vulnerability by manipulating snapshot files to include symlinks, leading to arbitrary file read by adding a symlink that points to a desired file on the filesystem and arbitrary file write by including a symlink and a payload file in the snapshot's directory structure. This vulnerability allows for the reading and writing of arbitrary files on the server, which could potentially lead to a full takeover of the system. The issue is fixed in version v1.9.0.

The Broadcom Wi-Fi driver in the kernel in Android 4.x before 4.4.4, 5.x before 5.1.1 LMY49G, and 6.x before 2016-02-01 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via crafted wireless control message packets, aka internal bug 25662029.

An HTTP servlet in vApp Manager in EMC Unisphere for VMAX Virtual Appliance before 8.2.0 allows remote attackers to write to arbitrary files via a crafted pathname.

In all Qualcomm products with Android releases from CAF using the Linux kernel, the length in an HCI command is not properly checked for validity.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Automobile, Snapdragon Mobile, and Snapdragon Wear MDM9206, MDM9650, SD 210/SD 212/SD 205, SD 425, SD 430, SD 450, SD 625, SD 650/52, SD 820, SD 820A, SD 835, SD 845, and SD 850, TZ applications are not properly validated.

qdrant/qdrant version 1.9.0-dev is vulnerable to path traversal due to improper input validation in the `/collections/{name}/snapshots/upload` endpoint. By manipulating the `name` parameter through URL encoding, an attacker can upload a file to an arbitrary location on the system, such as `/root/poc.txt`. This vulnerability allows for the writing and overwriting of arbitrary files on the server, potentially leading to a full takeover of the system. The issue is fixed in version 1.9.0.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile MDM9206, SD 625, SD 650/52, SD 835, SD 845, DDR address input validation is being improperly truncated.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, handles in the global client structure can become stale.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a count value that is read from a file is not properly validated.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the SafeSwitch test application does not properly validate the number of blocks to verify.

A Remote Code Execution vulnerability was identified in all Windows versions of Unity Editor, e.g., before 5.3.8p2, 5.4.x before 5.4.5p5, 5.5.x before 5.5.4p3, 5.6.x before 5.6.3p1, and 2017.x before 2017.1.0p4.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Mobile MDM9625, MDM9635M, MDM9645, MDM9650, MDM9655, SD 400, SD 800, SD 835, SD 845, SD 850, and SDX20, when QDI read, write, or ioctl are called, the passed-in pointer is not properly validated before accessing it for the delayed response.

A remote code execution vulnerability in the Android media framework (n/a). Product: Android. Versions: 7.0, 7.1.1, 7.1.2, 8.0, 8.1. ID: A-68160703.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Mobile MDM9625, MDM9635M, SD 400, and SD 800, userspace-provided pointer arguments are not validated.

The Microsoft Windows Search component on Microsoft Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, and 1703, and Windows Server 2016 allows a remote code execution vulnerability when it fails to properly handle DNS responses, aka "Windows Search Remote Code Execution Vulnerability".

xorg-x11-server before 1.19.5 was missing length validation in XFree86 DGA extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

A flaw was found in the way spice-client processed certain messages sent from the server. An attacker, having control of malicious spice-server, could use this flaw to crash the client or execute arbitrary code with permissions of the user running the client. spice-gtk versions through 0.34 are believed to be vulnerable.

PHICOMM K2(PSG1218) devices V22.5.11.5 and earlier allow unauthenticated remote code execution via a request to an unspecified ASP script; alternatively, the attacker can leverage unauthenticated access to this script to trigger a reboot via an ifType=reboot action.

The (1) git-remote-ext and (2) unspecified other remote helper programs in Git before 2.3.10, 2.4.x before 2.4.10, 2.5.x before 2.5.4, and 2.6.x before 2.6.1 do not properly restrict the allowed protocols, which might allow remote attackers to execute arbitrary code via a URL in a (a) .gitmodules file or (b) unknown other sources in a submodule.

Proxy command injection vulnerability in Trend Micro OfficeScan 11 and XG (12) allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the tr parameter within Proxy.php. Formerly ZDI-CAN-4543.

xorg-x11-server before 1.19.5 was missing length validation in XFree86 VidModeExtension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in RENDER extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 had wrong extra length check in ProcXIChangeHierarchy function allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

An issue has been discovered on the Belden Hirschmann Tofino Xenon Security Appliance before 03.2.00. Design flaws in OPC classic and in custom netfilter modules allow an attacker to remotely activate rules on the firewall and to connect to any TCP port of a protected asset, thus bypassing the firewall. The attack methodology is a crafted OPC dynamic port shift.

Proxy command injection vulnerability in Trend Micro OfficeScan 11 and XG (12) allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the T parameter within Proxy.php. Formerly ZDI-CAN-4544.

xorg-x11-server before 1.19.5 was missing length validation in XINERAMA extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

xorg-x11-server before 1.19.5 was missing length validation in X-Resource extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

A vulnerability in the pluggable authentication module (PAM) of Juniper Networks Junos OS may allow an unauthenticated network based attacker to potentially execute arbitrary code or crash daemons such as telnetd or sshd that make use of PAM. Affected Juniper Networks Junos OS releases are: 14.1 from 14.1R5 prior to 14.1R8-S4, 14.1R9; 14.1X53 prior to 14.1X53-D50 on EX and QFX series; 14.2 from 14.2R3 prior to 14.2R7-S8, 14.2R8; No other Junos OS releases are affected by this issue. No other Juniper Networks products are affected by this issue.

In the medialibrary component in QNAP NAS 4.3.3.0229, an un-authenticated, remote attacker can execute arbitrary system commands as the root user of the NAS application.

Gitlab Community Edition version 10.3 is vulnerable to a lack of input validation in the system_hook_push queue through web hook component resulting in remote code execution.

math.js before 3.17.0 had an issue where private properties such as a constructor could be replaced by using unicode characters when creating an object.

Cobbler version up to 2.8.2 is vulnerable to a command injection vulnerability in the "add repo" component resulting in arbitrary code execution as root user.

Gitlab Community Edition version 10.2.4 is vulnerable to a lack of input validation in the GitlabProjectsImportService resulting in remote code execution.

nodejs ejs versions older than 2.5.3 is vulnerable to remote code execution due to weak input validation in ejs.renderFile() function

MyBB (aka MyBulletinBoard) before 1.8.8 and MyBB Merge System before 1.8.8 allow remote attackers to have unspecified impact via vectors related to "loose comparison false positives."

An issue was discovered in Cloud Foundry Foundation routing-release versions prior to 0.142.0 and cf-release versions 203 to 231. Incomplete validation logic in JSON Web Token (JWT) libraries can allow unprivileged attackers to impersonate other users to the routing API, aka an "Unauthenticated JWT signing algorithm in routing" issue.

Exponent CMS 2.3.9 suffers from a remote code execution vulnerability in /install/index.php. An attacker can upload an evil 'exploit.tar.gz' file to the website, then extract it by visiting '/install/index.php?install_sample=../../files/exploit', which leads to arbitrary code execution.

Exponent CMS 2.3.9 suffers from a remote code execution vulnerability in /install/index.php. An attacker can upload 'php' file to the website through uploader_paste.php, then overwrite /framework/conf/config.php, which leads to arbitrary code execution.

Improper input validation in Access Control APIs. Access control API may return memory range checking incorrectly. Product: Android. Versions: Kernel 3.18. Android ID: A-31623057. References: QC-CR#1009695.

ZOHO WebNMS Framework 5.2 and 5.2 SP1 allows remote attackers to bypass authentication and impersonate arbitrary users via the UserName HTTP header.

The vApp Managers web application in EMC Unisphere for VMAX Virtual Appliance 8.x before 8.3.0 and Solutions Enabler Virtual Appliance 8.x before 8.3.0 allows remote attackers to execute arbitrary code via crafted input to the (1) GetSymmCmdRequest or (2) RemoteServiceHandler class.

The Graphics component in Microsoft Windows Vista SP2; Windows Server 2008 SP2 and R2 SP1; Windows 7 SP1; Windows 8.1; Windows Server 2012 Gold and R2; Windows RT 8.1; Windows 10 Gold, 1511, and 1607; Office 2007 SP3; Office 2010 SP2; Word Viewer; Skype for Business 2016; Lync 2013 SP1; Lync 2010; Lync 2010 Attendee; and Live Meeting 2007 Console allows attackers to execute arbitrary code via a crafted True Type font, aka "True Type Font Parsing Elevation of Privilege Vulnerability."

sound/soc/msm/qdsp6v2/msm-ds2-dap-config.c in a Qualcomm QDSP6v2 driver in Android before 2016-10-05 allows attackers to cause a denial of service or possibly have unspecified other impact via an invalid data length, aka Qualcomm internal bug CR 1027585.

sound/soc/msm/qdsp6v2/msm-ds2-dap-config.c in a Qualcomm QDSP6v2 driver in Android before 2016-10-05 allows attackers to cause a denial of service or possibly have unspecified other impact via a large negative value for the data length, aka Qualcomm internal bug CR 1041130.

The LDAP directory connector in Atlassian Crowd before 2.8.8 and 2.9.x before 2.9.5 allows remote attackers to execute arbitrary code via an LDAP attribute with a crafted serialized Java object, aka LDAP entry poisoning.

The dropbearconvert command in Dropbear SSH before 2016.74 allows attackers to execute arbitrary code via a crafted OpenSSH key file.