Uncontrolled resource consumption in Mitsubishi Electric MELSEC iQ-R series C Controller Module R12CCPU-V Firmware Versions "16" and prior allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition by sending a large number of packets in a short time while the module starting up. System reset is required for recovery.
Out-of-bounds Read vulnerability in Mitsubishi Electric GX Works2 versions 1.606G and prior, Mitsubishi Electric MELSOFT Navigator versions 2.84N and prior and Mitsubishi Electric EZSocket versions 5.4 and prior allows an attacker to cause a DoS condition in the software by getting a user to open malicious project file specially crafted by an attacker.
Integer Underflow vulnerability in Mitsubishi Electric GX Works2 versions 1.606G and prior, Mitsubishi Electric MELSOFT Navigator versions 2.84N and prior and Mitsubishi Electric EZSocket versions 5.4 and prior allows an attacker to cause a DoS condition in the software by getting a user to open malicious project file specially crafted by an attacker.
Signal Handler Race Condition vulnerability in Mitsubishi Electric India GC-ENET-COM whose first 2 digits of 11-digit serial number of unit are "16" allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition in Ethernet communication by sending a large number of specially crafted packets to any UDP port when GC-ENET-COM is configured as a Modbus TCP Server. The communication resumes only when the power of the main unit is turned off and on or when the GC-ENET-COM is hot-swapped from the main unit.
Buffer Over-read vulnerability in Mitsubishi Electric MC Works64 versions 4.00A to 4.04E, Mitsubishi Electric GENESIS64 versions 10.97 and prior, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97 and prior, Mitsubishi Electric ICONICS Suite versions 10.97 and prior, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite versions 10.97 and prior, Mitsubishi Electric GENESIS32 versions 9.7 and prior, and Mitsubishi Electric Iconics Digital Solutions GENESIS32 versions 9.7 and prior allows an attacker to cause a DoS condition in the database server by getting a legitimate user to import a configuration file containing specially crafted stored procedures into GENESIS64, ICONICS Suite, MC Works64, or GENESIS32 and execute commands against the database from GENESIS64, ICONICS Suite, MC Works64, or GENESIS32.
Uncontrolled resource consumption vulnerability in Ethernet Port on MELSEC iQ-R, Q and L series CPU modules (R 00/01/02 CPU firmware versions '20' and earlier, R 04/08/16/32/120 (EN) CPU firmware versions '52' and earlier, R 08/16/32/120 SFCPU firmware versions '22' and earlier, R 08/16/32/120 PCPU all versions, R 08/16/32/120 PSFCPU all versions, R 16/32/64 MTCPU all versions, Q03 UDECPU, Q 04/06/10/13/20/26/50/100 UDEHCPU serial number '22081' and earlier , Q 03/04/06/13/26 UDVCPU serial number '22031' and earlier, Q 04/06/13/26 UDPVCPU serial number '22031' and earlier, Q 172/173 DCPU all versions, Q 172/173 DSCPU all versions, Q 170 MCPU all versions, Q 170 MSCPU all versions, L 02/06/26 CPU (-P) and L 26 CPU - (P) BT all versions) allows a remote unauthenticated attacker to stop the Ethernet communication functions of the products via a specially crafted packet, which may lead to a denial of service (DoS) condition .
Mitsubishi Electric Q03/04/06/13/26UDVCPU: serial number 20081 and prior, Q04/06/13/26UDPVCPU: serial number 20081 and prior, and Q03UDECPU, Q04/06/10/13/20/26/50/100UDEHCPU: serial number 20101 and prior. A remote attacker can send specific bytes over Port 5007 that will result in an Ethernet stack crash and disruption to USB communication.
Uncontrolled Resource Consumption vulnerability in Mitsubishi Electric MELSEC iQ-R series CPU modules (R00/01/02CPU all versions, R04/08/16/32/120(EN)CPU all versions, R08/16/32/120SFCPU all versions, R08/16/32/120PCPU all versions, R08/16/32/120PSFCPU all versions) allows a remote unauthenticated attacker to prevent legitimate clients from connecting to the MELSOFT transmission port (TCP/IP) by not closing a connection properly, which may lead to a denial of service (DoS) condition.
Uncontrolled resource consumption vulnerability in Mitsubishi Electoric FA Engineering Software (CPU Module Logging Configuration Tool Ver. 1.94Y and earlier, CW Configurator Ver. 1.010L and earlier, EM Software Development Kit (EM Configurator) Ver. 1.010L and earlier, GT Designer3 (GOT2000) Ver. 1.221F and earlier, GX LogViewer Ver. 1.96A and earlier, GX Works2 Ver. 1.586L and earlier, GX Works3 Ver. 1.058L and earlier, M_CommDTM-HART Ver. 1.00A, M_CommDTM-IO-Link Ver. 1.02C and earlier, MELFA-Works Ver. 4.3 and earlier, MELSEC-L Flexible High-Speed I/O Control Module Configuration Tool Ver.1.004E and earlier, MELSOFT FieldDeviceConfigurator Ver. 1.03D and earlier, MELSOFT iQ AppPortal Ver. 1.11M and earlier, MELSOFT Navigator Ver. 2.58L and earlier, MI Configurator Ver. 1.003D and earlier, Motion Control Setting Ver. 1.005F and earlier, MR Configurator2 Ver. 1.72A and earlier, MT Works2 Ver. 1.156N and earlier, RT ToolBox2 Ver. 3.72A and earlier, and RT ToolBox3 Ver. 1.50C and earlier) allows an attacker to cause a denial of service (DoS) condition attacks via unspecified vectors.
Uncontrolled resource consumption vulnerability in MELSEC iQ-R Series modules (R00/01/02CPU firmware version '19' and earlier, R04/08/16/32/120 (EN) CPU firmware version '51' and earlier, R08/16/32/120SFCPU firmware version '22' and earlier, R08/16/32/120PCPU firmware version '25' and earlier, R08/16/32/120PSFCPU firmware version '06' and earlier, RJ71EN71 firmware version '47' and earlier, RJ71GF11-T2 firmware version '47' and earlier, RJ72GF15-T2 firmware version '07' and earlier, RJ71GP21-SX firmware version '47' and earlier, RJ71GP21S-SX firmware version '47' and earlier, and RJ71GN11-T2 firmware version '11' and earlier) allows a remote unauthenticated attacker to cause an error in a CPU unit and cause a denial-of-service (DoS) condition in execution of the program and its communication, or to cause a denial-of-service (DoS) condition in communication via the unit by receiving a specially crafted SLMP packet
When MELSOFT transmission port (UDP/IP) of Mitsubishi Electric MELSEC iQ-R series (all versions), MELSEC iQ-F series (all versions), MELSEC Q series (all versions), MELSEC L series (all versions), and MELSEC F series (all versions) receives massive amount of data via unspecified vectors, resource consumption occurs and the port does not process the data properly. As a result, it may fall into a denial-of-service (DoS) condition. The vendor states this vulnerability only affects Ethernet communication functions.
Uncontrolled resource consumption vulnerability in MELSEC iQ-R Series CPU Modules (R00/01/02CPU Firmware versions from '05' to '19' and R04/08/16/32/120(EN)CPU Firmware versions from '35' to '51') allows a remote attacker to cause an error in a CPU unit via a specially crafted HTTP packet, which may lead to a denial-of-service (DoS) condition in execution of the program and its communication.
Mitsubishi MELSEC iQ-R Series PLCs with firmware 49 allow an unauthenticated attacker to halt the industrial process by sending a crafted packet over the network. This denial of service attack exposes Improper Input Validation. After halting, physical access to the PLC is required in order to restore production, and the device state is lost. This is related to R04CPU, RJ71GF11-T2, R04CPU, and RJ71GF11-T2.
Mitsubishi MELSEC iQ-R Series PLCs with firmware 33 allow attackers to halt the industrial process by sending an unauthenticated crafted packet over the network, because this denial of service attack consumes excessive CPU time. After halting, physical access to the PLC is required in order to restore production.
Denial of Service (DoS) vulnerability in Jungo WinDriver before 12.6.0 allows local attackers to cause a Windows blue screen error.
Out-of-Bounds Write vulnerability in Jungo WinDriver before 12.5.1 allows local attackers to cause a Windows blue screen error and Denial of Service (DoS).
In Mitsubishi Electric MELSEC-Q series Ethernet module QJ71E71-100 serial number 20121 and prior, an attacker could send crafted TCP packets against the FTP service, forcing the target devices to enter an error mode and cause a denial-of-service condition.
Mitsubishi Electric FR Configurator2, Version 1.16S and prior. This vulnerability can be triggered when an attacker provides the target with a rogue project file (.frc2). Once a user opens the rogue project, CPU exhaustion occurs, which causes the software to quit responding until the application is restarted.
OpenKMIP PyKMIP version All versions before 0.8.0 contains a CWE 399: Resource Management Errors (similar issue to CVE-2015-5262) vulnerability in PyKMIP server that can result in DOS: the server can be made unavailable by one or more clients opening all of the available sockets. This attack appear to be exploitable via A client or clients open sockets with the server and then never close them. This vulnerability appears to have been fixed in 0.8.0.
The affected product is vulnerable to a network-based attack by threat actors sending unimpeded requests to the receiving server, which could cause a denial-of-service condition due to lack of heap memory resources.
A vulnerability has been found in ThingsBoard up to 3.7.0 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component HTTP RPC API. The manipulation leads to resource consumption. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 3.7.1 is able to address this issue. It is recommended to upgrade the affected component. The vendor was informed on 2024-07-24 about this vulnerability and announced the release of 3.7.1 for the second half of September 2024.
The wav_open_read function in frontend/input.c in Freeware Advanced Audio Coder (FAAC) 1.28 allows remote attackers to cause a denial of service (large loop) via a crafted wav file.
Receipt of specially crafted UDP/IP packets over MPLS may be able to bypass a stateless firewall filter. The crafted UDP packets must be encapsulated and meet a very specific packet format to be classified in a way that bypasses IP firewall filter rules. The packets themselves do not cause a service interruption (e.g. RPD crash), but receipt of a high rate of UDP packets may be able to contribute to a denial of service attack. This issue only affects processing of transit UDP/IP packets over MPLS, received on an interface with MPLS enabled. TCP packet processing and non-MPLS encapsulated UDP packet processing are unaffected by this issue. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D76; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1F6-S10, 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D67 on QFX10K; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D100; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.1 versions prior to 18.1R2; 18.2X75 versions prior to 18.2X75-D5.
The TDStretch::acceptNewOverlapLength function in source/SoundTouch/TDStretch.cpp in SoundTouch 1.9.2 allows remote attackers to cause a denial of service (memory allocation error and application crash) via a crafted wav file.
The iw_read_gif_file function in imagew-gif.c in libimageworsener.a in ImageWorsener 1.3.0 allows remote attackers to consume an amount of available memory via a crafted file.
OpenVPN versions before 2.4.3 and before 2.3.17 are vulnerable to remote denial-of-service due to memory exhaustion caused by memory leaks and double-free issue in extract_x509_extension().
A flaw was found in jboss-remoting in versions before 5.0.20.SP1-redhat-00001. A malicious attacker could cause threads to hold up forever in the EJB server by writing a sequence of bytes corresponding to the expected messages of a successful EJB client request, but omitting the ACK messages, or just tamper with jboss-remoting code, deleting the lines that send the ACK message from the EJB client code resulting in a denial of service. The highest threat from this vulnerability is to system availability.
A Resource Exhaustion issue was discovered in Rockwell Automation ControlLogix 5580 controllers V28.011, V28.012, and V28.013; ControlLogix 5580 controllers V29.011; CompactLogix 5380 controllers V28.011; and CompactLogix 5380 controllers V29.011. This vulnerability may allow an attacker to cause a denial of service condition by sending a series of specific CIP-based commands to the controller.
Fluentd collects events from various data sources and writes them to files to help unify logging infrastructure. The parser_apache2 plugin in Fluentd v0.14.14 to v1.14.1 suffers from a regular expression denial of service (ReDoS) vulnerability. A broken apache log with a certain pattern of string can spend too much time in a regular expression, resulting in the potential for a DoS attack. This issue is patched in version 1.14.2 There are two workarounds available. Either don't use parser_apache2 for parsing logs (which cannot guarantee generated by Apache), or put patched version of parser_apache2.rb into /etc/fluent/plugin directory (or any other directories specified by the environment variable `FLUENT_PLUGIN` or `--plugin` option of fluentd).
OctoRPKI tries to load the entire contents of a repository in memory, and in the case of a GZIP bomb, unzip it in memory, making it possible to create a repository that makes OctoRPKI run out of memory (and thus crash).
A vulnerability was discovered in GitLab starting with version 12.2 that allows an attacker to cause uncontrolled resource consumption with a specially crafted file.
A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321.
If named is configured to use Response Policy Zones (RPZ) an error processing some rule types can lead to a condition where BIND will endlessly loop while handling a query. Affects BIND 9.9.10, 9.10.5, 9.11.0->9.11.1, 9.9.10-S1, 9.10.5-S1.
OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.
In Eclipse Jetty 9.4.6.v20170531 to 9.4.36.v20210114 (inclusive), 10.0.0, and 11.0.0 when Jetty handles a request containing multiple Accept headers with a large number of “quality” (i.e. q) parameters, the server may enter a denial of service (DoS) state due to high CPU usage processing those quality values, resulting in minutes of CPU time exhausted processing those quality values.
Cisco IOS 12.2(15) and earlier allows remote attackers to cause a denial of service (refused VTY (virtual terminal) connections), via a crafted TCP connection to the Telnet or reverse Telnet port.
A flaw was found in Undertow. A potential security issue in flow control handling by the browser over http/2 may potentially cause overhead or a denial of service in the server. The highest threat from this vulnerability is availability. This flaw affects Undertow versions prior to 2.0.40.Final and prior to 2.2.11.Final.
A vulnerability, which was classified as problematic, was found in Axiomatic Bento4 up to 1.6.0-641. Affected is the function AP4_DataBuffer::SetDataSize of the file Mp4Decrypt.cpp of the component mp4decrypt. The manipulation leads to allocation of resources. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used.
Nes is a websocket extension library for hapi. Hapi is a webserver framework. Versions below and including 6.4.0 have a denial of service vulnerability via an invalid Cookie header. This is only present when websocket authentication is set to `cookie`. Submitting an invalid cookie on the websocket upgrade request will cause the node process to error out.
A malicious container image can consume an unbounded amount of memory when being pulled to a container runtime host, such as Red Hat Enterprise Linux using podman, or OpenShift Container Platform. An attacker can use this flaw to trick a user, with privileges to pull container images, into crashing the process responsible for pulling the image. This flaw affects containers-image versions before 5.2.0.
A flaw was found in the hivex library. This flaw allows an attacker to input a specially crafted Windows Registry (hive) file, which would cause hivex to recursively call the _get_children() function, leading to a stack overflow. The highest threat from this vulnerability is to system availability.
There's a flaw in OpenEXR's Scanline API functionality in versions before 3.0.0-beta. An attacker who is able to submit a crafted file to be processed by OpenEXR could trigger excessive consumption of memory, resulting in an impact to system availability.
User controlled `request.getHeader("Referer")`, `request.getRequestURL()` and `request.getQueryString()` are used to build and run a regex expression. The attacker doesn't have to use a browser and may send a specially crafted Referer header programmatically. Since the attacker controls the string and the regex pattern he may cause a ReDoS by regex catastrophic backtracking on the server side. This problem has been fixed in Roller 6.0.2.
Header::readfrom in IlmImf/ImfHeader.cpp in OpenEXR 2.2.0 allows remote attackers to cause a denial of service (excessive memory allocation) via a crafted file that is accessed with the ImfOpenInputFile function in IlmImf/ImfCRgbaFile.cpp. NOTE: The maintainer and multiple third parties believe that this vulnerability isn't valid
A denial of service flaw was found in dovecot before 2.2.34. An attacker able to generate random SNI server names could exploit TLS SNI configuration lookups, leading to excessive memory usage and the process to restart.
There's a flaw in OpenEXR's scanline input file functionality in versions before 3.0.0-beta. An attacker able to submit a crafted file to be processed by OpenEXR could consume excessive system memory. The greatest impact of this flaw is to system availability.
Git through 2.14.2 mishandles layers of tree objects, which allows remote attackers to cause a denial of service (memory consumption) via a crafted repository, aka a Git bomb. This can also have an impact of disk consumption; however, an affected process typically would not survive its attempt to build the data structure in memory before writing to disk.
SheetJS and SheetJS Pro through 0.16.9 allows attackers to cause a denial of service (memory consumption) via a crafted .xlsx document that is mishandled when read by xlsx.js (issue 1 of 2).
Prism is a syntax highlighting library. Some languages before 1.24.0 are vulnerable to Regular Expression Denial of Service (ReDoS). When Prism is used to highlight untrusted (user-given) text, an attacker can craft a string that will take a very very long time to highlight. This problem has been fixed in Prism v1.24. As a workaround, do not use ASCIIDoc or ERB to highlight untrusted text. Other languages are not affected and can be used to highlight untrusted text.
SheetJS and SheetJS Pro through 0.16.9 allows attackers to cause a denial of service (memory consumption) via a crafted .xlsx document that is mishandled when read by xlsx.js (issue 2 of 2).