A flaw in ICMP packets in the Linux kernel may allow an attacker to quickly scan open UDP ports. This flaw allows an off-path remote attacker to effectively bypass source port UDP randomization. Software that relies on UDP source port randomization are indirectly affected as well on the Linux Based Products (RUGGEDCOM RM1224: All versions between v5.0 and v6.4, SCALANCE M-800: All versions between v5.0 and v6.4, SCALANCE S615: All versions between v5.0 and v6.4, SCALANCE SC-600: All versions prior to v2.1.3, SCALANCE W1750D: v8.3.0.1, v8.6.0, and v8.7.0, SIMATIC Cloud Connect 7: All versions, SIMATIC MV500 Family: All versions, SIMATIC NET CP 1243-1 (incl. SIPLUS variants): Versions 3.1.39 and later, SIMATIC NET CP 1243-7 LTE EU: Version
Red Hat JBoss Operations Network (JON) 3.0.x before 3.0.1, 2.4.2, and earlier, when LDAP authentication is enabled and the LDAP bind account credentials are invalid, allows remote attackers to login to LDAP-based accounts via an arbitrary password in a login request.
Incorrect handling of negative zero in V8 in Google Chrome prior to 72.0.3626.81 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page.
Vulnerability in the Java SE, Java SE Embedded component of Oracle Java SE (subcomponent: Networking). Supported versions that are affected are Java SE: 7u221, 8u212, 11.0.3 and 12.0.1; Java SE Embedded: 8u211. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Java SE, Java SE Embedded accessible data as well as unauthorized read access to a subset of Java SE, Java SE Embedded accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets (in Java SE 8), that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.0 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N).
Red Hat JBoss Operations Network (JON) before 2.4.2 and 3.0.x before 3.0.1 allows remote attackers to hijack agent sessions via an agent registration request without a security token.
Red Hat JBoss Operations Network (JON) before 2.4.2 and 3.0.x before 3.0.1 does not check the JON agent key, which allows remote attackers to spoof the identity of arbitrary agents via the registered agent name.
A flaw was found in OpenShift Container Platform, versions 3.11 and later, in which the CSRF tokens used in the cluster console component were found to remain static during a user's session. An attacker with the ability to observe the value of this token would be able to re-use the token to perform a CSRF attack.
While investigating bug PROTON-2014, we discovered that under some circumstances Apache Qpid Proton versions 0.9 to 0.27.0 (C library and its language bindings) can connect to a peer anonymously using TLS *even when configured to verify the peer certificate* while used with OpenSSL versions before 1.1.0. This means that an undetected man in the middle attack could be constructed if an attacker can arrange to intercept TLS traffic.
Parsing documents as HTML in Downloads in Google Chrome prior to 66.0.3359.117 allowed a remote attacker to cause Chrome to execute scripts via a local non-HTML page.
Open redirect vulnerability in Red Hat JBoss Enterprise Portal Platform before 5.2.0 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a URL in the initialURI parameter.
Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Security). Supported versions that are affected are Java SE: 6u181, 7u161 and 8u152; Java SE Embedded: 8u152; JRockit: R28.3.17. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Java SE, Java SE Embedded, JRockit accessible data as well as unauthorized access to critical data or complete access to all Java SE, Java SE Embedded, JRockit accessible data. Note: Applies to client and server deployment of Java. This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N).
Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: JMX). Supported versions that are affected are Java SE: 6u171, 7u161, 8u152 and 9.0.1; Java SE Embedded: 8u151; JRockit: R28.3.16. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Java SE, Java SE Embedded, JRockit accessible data as well as unauthorized access to critical data or complete access to all Java SE, Java SE Embedded, JRockit accessible data. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.0 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N).
A flaw was found in JBOSS Keycloak 3.2.1.Final. The Redirect URL for both Login and Logout are not normalized in org.keycloak.protocol.oidc.utils.RedirectUtils before the redirect url is verified. This can lead to an Open Redirection attack
A vulnerability in register allocation in JavaScript can lead to type confusion, allowing for an arbitrary read and write. This leads to remote code execution inside the sandboxed content process when triggered. This vulnerability affects Firefox ESR < 60.2.2 and Firefox < 62.0.3.
In Undertow before versions 7.1.2.CR1, 7.1.2.GA it was found that the fix for CVE-2016-4993 was incomplete and Undertow web server is vulnerable to the injection of arbitrary HTTP headers, and also response splitting, due to insufficient sanitization and validation of user input before the input is used as part of an HTTP header value.
Linux kernel version after commit bdcf0a423ea1 - 4.15-rc4+, 4.14.8+, 4.9.76+, 4.4.111+ contains a Incorrect Access Control vulnerability in NFS server (nfsd) that can result in remote users reading or writing files they should not be able to via NFS. This attack appear to be exploitable via NFS server must export a filesystem with the "rootsquash" options enabled. This vulnerability appears to have been fixed in after commit 1995266727fa.
A mechanism that uses AppCache to hijack a URL in a domain using fallback by serving the files from a sub-path on the domain. This has been addressed by requiring fallback files be inside the manifest directory. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55.
In Undertow 2.x before 2.0.0.Alpha2, 1.4.x before 1.4.17.Final, and 1.3.x before 1.3.31.Final, it was found that the fix for CVE-2017-2666 was incomplete and invalid characters are still allowed in the query string and path parameters. This could be exploited, in conjunction with a proxy that also permitted the invalid characters but with a different interpretation, to inject data into the HTTP response. By manipulating the HTTP response the attacker could poison a web-cache, perform an XSS attack, or obtain sensitive information from requests other than their own.
A flaw was found in openstack-keystone. Only the first 72 characters of an application secret are verified allowing attackers bypass some password complexity which administrators may be counting on. The highest threat from this vulnerability is to data confidentiality and integrity.
Openshift 4.9 does not use HTTP Strict Transport Security (HSTS) which may allow man-in-the-middle (MITM) attacks.
Open redirect via user-controlled query parameter. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 29240
wildfly-elytron: possible timing attacks via use of unsafe comparator. A flaw was found in Wildfly-elytron. Wildfly-elytron uses java.util.Arrays.equals in several places, which is unsafe and vulnerable to timing attacks. To compare values securely, use java.security.MessageDigest.isEqual instead. This flaw allows an attacker to access secure information or impersonate an authed user.
A flaw was found in the way samba client before samba 4.4.16, samba 4.5.14 and samba 4.6.8 used encryption with the max protocol set as SMB3. The connection could lose the requirement for signing and encrypting to any DFS redirects, allowing an attacker to read or alter the contents of the connection via a man-in-the-middle attack.
When libvirtd is configured by OSP director (tripleo-heat-templates) to use the TLS transport it defaults to the same certificate authority as all non-libvirtd services. As no additional authentication is configured this allows these services to connect to libvirtd (which is equivalent to root access). If a vulnerability exists in another service it could, combined with this flaw, be exploited to escalate privileges to gain control over compute nodes.
Keycloak's device authorization grant does not correctly validate the device code and client ID. An attacker client could abuse the missing validation to spoof a client consent request and trick an authorization admin into granting consent to a malicious OAuth client or possible unauthorized access to an existing OAuth client.
A flaw was found in Keycloak. A Keycloak server configured to support mTLS authentication for OAuth/OpenID clients does not properly verify the client certificate chain. A client that possesses a proper certificate can authorize itself as any other client, therefore, access data that belongs to other clients.
In RHEV-M VDC 2.2.0, it was found that the SSL certificate was not verified when using the client-side Red Hat Enterprise Virtualization Manager interface (a Windows Presentation Foundation (WPF) XAML browser application) to connect to the Red Hat Enterprise Virtualization Manager. An attacker on the local network could use this flaw to conduct a man-in-the-middle attack, tricking the user into thinking they are viewing the Red Hat Enterprise Virtualization Manager when the content is actually attacker-controlled, or modifying actions a user requested Red Hat Enterprise Virtualization Manager to perform.
A flaw was found in the OpenShift web console, where the access token is stored in the browser's local storage. An attacker can use this flaw to get the access token via physical access, or an XSS attack on the victim's browser. This flaw affects openshift/console versions before openshift/console-4.
A flaw was found in RHDS 11 and RHDS 12. While browsing entries LDAP tries to decode the userPassword attribute instead of the userCertificate attribute which could lead into sensitive information leaked. An attacker with a local account where the cockpit-389-ds is running can list the processes and display the hashed passwords. The highest threat from this vulnerability is to data confidentiality.
A flaw was found in Keycloak in versions before 10.0.0, where it does not perform the TLS hostname verification while sending emails using the SMTP server. This flaw allows an attacker to perform a man-in-the-middle (MITM) attack.
Improper Certificate Validation vulnerability in Hitachi Infrastructure Analytics Advisor on Linux (Analytics probe component), Hitachi Ops Center Analyzer on Linux (Analyzer probe component) allows Man in the Middle Attack.This issue affects Hitachi Infrastructure Analytics Advisor: from 2.0.0-00 through 4.4.0-00; Hitachi Ops Center Analyzer: from 10.0.0-00 before 10.9.1-00.
A flaw was found in Keycloak. This flaw depends on a non-default configuration "Revalidate Client Certificate" to be enabled and the reverse proxy is not validating the certificate before Keycloak. Using this method an attacker may choose the certificate which will be validated by the server. If this happens and the KC_SPI_TRUSTSTORE_FILE_FILE variable is missing/misconfigured, any trustfile may be accepted with the logging information of "Cannot validate client certificate trust: Truststore not available". This may not impact availability as the attacker would have no access to the server, but consumer applications Integrity or Confidentiality may be impacted considering a possible access to them. Considering the environment is correctly set to use "Revalidate Client Certificate" this flaw is avoidable.
libldap in certain third-party OpenLDAP packages has a certificate-validation flaw when the third-party package is asserting RFC6125 support. It considers CN even when there is a non-matching subjectAltName (SAN). This is fixed in, for example, openldap-2.4.46-10.el8 in Red Hat Enterprise Linux.
Sensitive information disclosure and manipulation due to improper certification validation. The following products are affected: Acronis Agent (Windows, macOS, Linux) before build 29633, Acronis Cyber Protect 15 (Windows, macOS, Linux) before build 30984.
An Improper Certificate Validation attack was found in Openshift. A re-encrypt Route with destinationCACertificate explicitly set to the default serviceCA skips internal Service TLS certificate validation. This flaw allows an attacker to exploit an invalid certificate, resulting in a loss of confidentiality.
A flaw was found in Ansible before version 2.2.0. The apt_key module does not properly verify key fingerprints, allowing remote adversary to create an OpenPGP key which matches the short key ID and inject this key instead of the correct key.
A flaw was found in Cockpit in versions prior to 260 in the way it handles the certificate verification performed by the System Security Services Daemon (SSSD). This flaw allows client certificates to authenticate successfully, regardless of the Certificate Revocation List (CRL) configuration or the certificate status. The highest threat from this vulnerability is to confidentiality.
It was found that Kubernetes as used by Openshift Enterprise 3 did not correctly validate X.509 client intermediate certificate host name fields. An attacker could use this flaw to bypass authentication requirements by using a specially crafted X.509 certificate.
A flaw was found in all versions of kubeclient up to (but not including) v4.9.3, the Ruby client for Kubernetes REST API, in the way it parsed kubeconfig files. When the kubeconfig file does not configure custom CA to verify certs, kubeclient ends up accepting any certificate (it wrongly returns VERIFY_NONE). Ruby applications that leverage kubeclient to parse kubeconfig files are susceptible to Man-in-the-middle attacks (MITM).
Shotwell version 0.22.0 (and possibly other versions) is vulnerable to a TLS/SSL certification validation flaw resulting in a potential for man in the middle attacks.
udp.c in the Linux kernel before 4.5 allows remote attackers to execute arbitrary code via UDP traffic that triggers an unsafe second checksum calculation during execution of a recv system call with the MSG_PEEK flag.
When PgBouncer is configured to use "cert" authentication, a man-in-the-middle attacker can inject arbitrary SQL queries when a connection is first established, despite the use of TLS certificate verification and encryption. This flaw affects PgBouncer versions prior to 1.16.1.
Oracle MySQL before 5.7.3, Oracle MySQL Connector/C (aka libmysqlclient) before 6.1.3, and MariaDB before 5.5.44 use the --ssl option to mean that SSL is optional, which allows man-in-the-middle attackers to spoof servers via a cleartext-downgrade attack, aka a "BACKRONYM" attack.
It was discovered that rpm-ostree and rpm-ostree-client before 2017.3 fail to properly check GPG signatures on packages when doing layering. Packages with unsigned or badly signed content could fail to be rejected as expected. This issue is partially mitigated on RHEL Atomic Host, where certificate pinning is used by default.
rhnreg_ks in Red Hat Network Client Tools (aka rhn-client-tools) on Red Hat Gluster Storage 2.1 and Enterprise Linux (RHEL) 5, 6, and 7 does not properly validate hostnames in X.509 certificates from SSL servers, which allows remote attackers to prevent system registration via a man-in-the-middle attack.
GnuTLS before 3.3.13 does not validate that the signature algorithms match when importing a certificate.
IBM QRadar SIEM 7.3, 7.4, and 7.5 does not preform proper certificate validation for some inter-host communications. IBM X-Force ID: 202015.
libvirt version 2.3.0 and later is vulnerable to a bad default configuration of "verify-peer=no" passed to QEMU by libvirt resulting in a failure to validate SSL/TLS certificates by default.
A insecure configuration for certificate verification (http.verify_mode = OpenSSL::SSL::VERIFY_NONE) may lead to verification bypass in Red Hat CloudForms 5.x.
An issue was discovered in Pulse Secure Pulse Connect Secure (PCS) through 2020-04-06. The applet in tncc.jar, executed on macOS, Linux, and Solaris clients when a Host Checker policy is enforced, accepts an arbitrary SSL certificate.