CA eHealth Performance Manager through 6.3.2.12 is affected by Improper Restriction of Excessive Authentication Attempts. An attacker is able to perform an arbitrary number of /web/frames/ authentication attempts using different passwords, and eventually gain access to a targeted account, NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue was discovered in Stormshield SNS through 4.2.1. A brute-force attack can occur.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.

Nextcloud server before 19.0.11, 20.0.10, 21.0.2 is vulnerable to brute force attacks due to lack of inclusion of IPv6 subnets in rate-limiting considerations. This could potentially result in an attacker bypassing rate-limit controls such as the Nextcloud brute-force protection.

Insufficiently Protected Credentials vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access of when credentials are discovered after a brute force attack.

A CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow an attacker to gain unauthorized access to the charging station web interface by performing brute force attacks. Affected Products: EVlink City EVC1S22P4 / EVC1S7P4 (All versions prior to R8 V3.4.0.2 ), EVlink Parking EVW2 / EVF2 / EVP2PE (All versions prior to R8 V3.4.0.2), and EVlink Smart Wallbox EVB1A (All versions prior to R8 V3.4.0.2)

IBM Guardium Data Encryption (GDE) 4.0.0.4 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196217.

IBM Security Guardium 11.2 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196314.

An issue was discovered in Fimer Aurora Vision before 2.97.10. The response to a failed login attempt discloses whether the username or password is wrong, helping an attacker to enumerate usernames. This can make a brute-force attack easier.

Hikvision DVR DS-7204HGHI-F1 V4.0.1 build 180903 Web Version sends a different response for failed ISAPI/Security/sessionLogin/capabilities login attempts depending on whether the user account exists, which might make it easier to enumerate users. However, only about 4 or 5 failed logins are allowed.

A CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to gain full access by brute force.

An Improper Restriction of Excessive Authentication Attempts issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. There are no penalties for repeatedly entering incorrect passwords.

Apache OpenMeetings 1.0.0 uses not very strong cryptographic storage, captcha is not used in registration and forget password dialogs and auth forms missing brute force protection.

IBM BigFix Compliance (TEMA SUAv1 SCA SCM) uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 123672.

A vulnerability in the Guest Portal login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Guest Portal login page. An exploit could allow the attacker to perform brute-force password attacks on the ISE Guest Portal. Cisco Bug IDs: CSCve98518.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) did not implement account lockout. Local account credentials may be extracted from the device via brute force guessing attacks.

An improper restriction of excessive authentication attempts vulnerability in /principals in Synology CardDAV Server before 6.0.7-0085 allows remote attackers to obtain user credentials via a brute-force attack.

phpMyFAQ before 2.9.8 does not properly mitigate brute-force attacks that try many passwords in attempted logins quickly.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the shareinfo endpoint. This may have allowed an attacker to enumerate potentially valid share tokens. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

Revive Adserver before 3.2.3 suffers from Improper Restriction of Excessive Authentication Attempts. The login page of Revive Adserver is vulnerable to password-guessing attacks. An account lockdown feature was considered, but rejected to avoid introducing service disruptions to regular users during such attacks. A random delay has instead been introduced as a countermeasure in case of password failures, along with a system to discourage parallel brute forcing. These systems will effectively allow the valid users to log in to the adserver, even while an attack is in progress.

Improper Restriction of Excessive Authentication Attempts vulnerability exists in all hardware versions of spaceLYnk and Wiser for KNX (formerly homeLYnk) which could allow an attacker to guess a password when brute force is used.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

An issue was discovered in MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 through 2.6.2. The login pages bruteforce detection is disabled by default.

In Solstice Pod before 3.3.0 (or Open4.3), the screen key can be enumerated using brute-force attacks via the /lookin/info Solstice Open Control API because there are only 1.7 million possibilities.

IBM Security Guardium 11.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 174857.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 179478.

IBM Tivoli Key Lifecycle Manager 3.0.1 and 4.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 184156.

In Solstice Pod before 3.3.0 (or Open4.3), the Administrator password can be enumerated using brute-force attacks via the /Config/service/initModel?password= Solstice Open Control API because there is no complexity requirement (e.g., it might be all digits or all lowercase letters).

LimitLoginAttempts.php in the limit-login-attempts-reloaded plugin before 2.17.4 for WordPress allows a bypass of (per IP address) rate limits because the X-Forwarded-For header can be forged. When the plugin is configured to accept an arbitrary header for the client source IP address, a malicious user is not limited to perform a brute force attack, because the client IP header accepts any arbitrary string. When randomizing the header input, the login count does not ever reach the maximum allowed retries.

Fuel CMS 1.5.0 has a brute force vulnerability in fuel/modules/fuel/controllers/Login.php

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower allows SSH/Telnet sessions, which may be vulnerable to brute force attacks to bypass authentication.

An issue in the user login box of CSCMS v4.0 allows attackers to hijack user accounts via brute force attacks.

An issue in the user login box of LJCMS v1.11 allows attackers to hijack user accounts via brute force attacks.

Information disclosure in Logon Page in MV's mConnect application v02.001.00 allows an attacker to know valid users from the application's database via brute force.

Improper Authentication in Lin-CMS-Flask v0.1.1 allows remote attackers to launch brute force login attempts without restriction via the 'login' function in the component 'app/api/cms/user.py'.

A vulnerability has been identified in SIMATIC HMI Basic Panels 2nd Generation (incl. SIPLUS variants) (All versions < V16), SIMATIC HMI Comfort Panels (incl. SIPLUS variants) (All versions <= V16), SIMATIC HMI Mobile Panels (All versions <= V16), SIMATIC HMI Unified Comfort Panels (All versions <= V16). Affected devices insufficiently block excessive authentication attempts. This could allow a remote attacker to discover user passwords and obtain access to the Sm@rt Server via a brute-force attack.

Venki Supravizio BPM 10.1.2 does not limit the number of authentication attempts. An unauthenticated user may exploit this vulnerability to launch a brute-force authentication attack against the Login page.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It has brute-force attack mishandling because the CAS service lacks a limit on login failures.

OpenClinic GA versions 5.09.02 and 5.89.05b contain an authentication mechanism within the system that does not provide sufficient complexity to protect against brute force attacks, which may allow unauthorized users to access the system after no more than a fixed maximum number of attempts.

OpenClinic GA versions 5.09.02 and 5.89.05b may allow an attacker to bypass the system’s account lockout protection, which may allow brute force password attacks.

The Web UI component of Mitel MiVoice 6800 and 6900 series SIP Phones with firmware before 5.1.0.SP5 could allow an unauthenticated attacker to expose sensitive information due to improper memory handling during failed login attempts.

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (with TEEGRIS) software. Attackers can determine user credentials via a brute-force attack against the Gatekeeper trustlet. The Samsung ID is SVE-2020-16908 (May 2020).

A vulnerability was discovered in GitLab versions before 13.1.10, 13.2.8 and 13.3.4. GitLab OAuth endpoint was vulnerable to brute-force attacks through a specific parameter.