Memory leak in the SIP inspection engine in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to cause a denial of service (memory consumption and instability) via crafted SIP packets, aka Bug ID CSCuf67469.

Cisco ONS 15454 controller cards with software 9.6 and earlier allow remote attackers to cause a denial of service (flash write outage) via a TCP FIN attack that triggers file-descriptor exhaustion, aka Bug ID CSCug97315.

Memory leak in the GUI in the Impact server in Cisco Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (memory consumption) via unspecified vectors, aka Bug ID CSCub58999.

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.1), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.15); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (active IPsec tunnel loss and prevention of new tunnels) via a malformed IKE message through an existing tunnel to UDP port 4500, aka Bug ID CSCtc47782.

The IKE implementation in Cisco IOS 15.4(1)T and earlier and IOS XE allows remote attackers to cause a denial of service (security-association drop) via crafted Main Mode packets, aka Bug ID CSCun31021.

Cisco ASR 5000 devices with software 16.0(900) allow remote attackers to cause a denial of service (telnetd process restart) via a TELNET connection, aka Bug ID CSCuv25815.

The Concurrent Data Management Replication process in Cisco IOS XR 5.3.0 on ASR 9000 devices allows remote attackers to cause a denial of service (BGP process reload) via malformed BGPv4 packets, aka Bug ID CSCur70670.

A vulnerability in the web server of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to cause the web server process to crash, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of user-supplied input on the web interface. An attacker could exploit this vulnerability by submitting a crafted HTTP request to certain endpoints of the affected software. A successful exploit could allow an attacker to cause the web server to crash. Physical access to the device may be required for a restart.

The ITM web server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (temporary HTTP service outage) via a flood of TCP packets, aka Bug ID CSCuh36313.

A vulnerability in the web interface of Cisco Small Business 200, 300, and 500 Series Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of requests sent to the web interface. An attacker could exploit this vulnerability by sending a malicious request to the web interface of an affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

A vulnerability in the IPv6 traffic processing of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an unexpected restart of the netstack process on an affected device. The vulnerability is due to improper validation of IPv6 traffic sent through an affected device. An attacker could exploit this vulnerability by sending a malformed IPv6 packet through an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition while the netstack process restarts. A sustained attack could lead to a reboot of the device.

A vulnerability in the Snort 2 and Snort 3 TCP and UDP detection engine of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause memory corruption, which could cause the Snort detection engine to restart unexpectedly. This vulnerability is due to improper memory management when the Snort detection engine processes specific TCP or UDP packets. An attacker could exploit this vulnerability by sending crafted TCP or UDP packets through a device that is inspecting traffic using the Snort detection engine. A successful exploit could allow the attacker to restart the Snort detection engine repeatedly, which could cause a denial of service (DoS) condition. The DoS condition impacts only the traffic through the device that is examined by the Snort detection engine. The device can still be managed over the network. Note: Once a memory block is corrupted, it cannot be cleared until the Cisco Firepower 2100 Series Appliance is manually reloaded. This means that the Snort detection engine could crash repeatedly, causing traffic that is processed by the Snort detection engine to be dropped until the device is manually reloaded.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

The firewall subsystem in Cisco Identity Services Engine has an incorrect rule for open ports, which allows remote attackers to cause a denial of service (CPU consumption or process crash) via a flood of malformed IP packets, aka Bug ID CSCug94572.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of email messages that contain large attachments. An attacker could exploit this vulnerability by sending a malicious email message through the targeted device. A successful exploit could allow the attacker to cause a permanent DoS condition due to high CPU utilization. This vulnerability may require manual intervention to recover the ESA.

A vulnerability in the Cisco Umbrella Integration feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition, related to the OpenDNS software. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvb86327.

A vulnerability in the web-based management interface of Cisco RV110W, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to disconnect clients that are connected to the guest network on an affected router. The vulnerability is due to improper authorization of an HTTP request. An attacker could exploit this vulnerability by accessing the URL for device disconnection and providing the connected device information. A successful exploit could allow the attacker to deny service to specific clients that are connected to the guest network.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

The C-Series Rack Server component 1.4 in Cisco Unified Computing System (UCS) does not properly restrict inbound access to ports, which allows remote attackers to cause a denial of service (Integrated Management Controller reboot or hang) via crafted packets, as demonstrated by nmap, aka Bug ID CSCtx19850.

Cisco Catalyst LAN switches running Catalyst 5000 supervisor software allows remote attackers to perform a denial of service by forcing the supervisor module to reload.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition.

Buffer overflow in Cisco 7xx routers through the telnet service.

Cisco TelePresence Video Communication Server (VCS) and Cisco Expressway allow remote attackers to cause a denial of service (memory and CPU consumption, and partial outage) via crafted SIP packets, aka Bug ID CSCur12473.

A vulnerability in the processing of IP Service Level Agreement (SLA) packets by Cisco IOS Software and Cisco IOS XE software could allow an unauthenticated, remote attacker to cause an interface wedge and an eventual denial of service (DoS) condition on the affected device. The vulnerability is due to improper socket resources handling in the IP SLA responder application code. An attacker could exploit this vulnerability by sending crafted IP SLA packets to an affected device. An exploit could allow the attacker to cause an interface to become wedged, resulting in an eventual denial of service (DoS) condition on the affected device.

A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: This vulnerability could be exploited over either IPv4 or IPv6 transport.

Memory leak in the web framework in the server in Cisco Unified Presence (CUP) allows remote attackers to cause a denial of service (memory consumption) via malformed TCP packets, aka Bug ID CSCug38080.

TMSSNMPService.exe in TelePresence Manager in Cisco TelePresence Management Suite (TMS) on 64-bit platforms allows remote attackers to cause a denial of service (process crash) via SNMP traps, aka Bug ID CSCue00028.

Cisco NX-OS on the Nexus 1000V does not assign the proper priority to heartbeat messages from a Virtual Ethernet Module (VEM) to a Virtual Supervisor Module (VSM), which allows remote attackers to cause a denial of service (false VEM unavailability report) via a flood of UDP packets, aka Bug ID CSCud14840.

Cisco ACE A2(3.6) allows log retention DoS.

node-jose is a JavaScript implementation of the JSON Object Signing and Encryption (JOSE) for web browsers and node.js-based servers. Prior to version 2.2.0, when using the non-default "fallback" crypto back-end, ECC operations in `node-jose` can trigger a Denial-of-Service (DoS) condition, due to a possible infinite loop in an internal calculation. For some ECC operations, this condition is triggered randomly; for others, it can be triggered by malicious input. The issue has been patched in version 2.2.0. Since this issue is only present in the "fallback" crypto implementation, it can be avoided by ensuring that either WebCrypto or the Node `crypto` module is available in the JS environment where `node-jose` is being run.

Cisco Carrier Routing System (CRS) allows remote attackers to cause a denial of service (packet loss) via short malformed packets that trigger inefficient processing, aka Bug ID CSCud79136.

A vulnerability in the authentication service of the Cisco Unified Communications Manager IM and Presence (Unified CM IM&P) Service, Cisco TelePresence Video Communication Server (VCS), and Cisco Expressway Series could allow an unauthenticated, remote attacker to cause a service outage for users attempting to authenticate, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient controls for specific memory operations. An attacker could exploit this vulnerability by sending a malformed Extensible Messaging and Presence Protocol (XMPP) authentication request to an affected system. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing users from successfully authenticating. Exploitation of this vulnerability does not impact users who were authenticated prior to an attack.

A vulnerability in the internal packet-processing functionality of the Cisco StarOS operating system running on virtual platforms could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service interface from receiving any traffic, which would lead to a DoS condition on the affected interface. The device may have to be manually reloaded to recover from exploitation of this vulnerability.

Cisco IOS 12.2(15) and earlier allows remote attackers to cause a denial of service (refused VTY (virtual terminal) connections), via a crafted TCP connection to the Telnet or reverse Telnet port.

A vulnerability in the cryptographic driver for Cisco Adaptive Security Appliance Software (ASA) and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reboot unexpectedly. The vulnerability is due to incomplete input validation of a Secure Sockets Layer (SSL) or Transport Layer Security (TLS) ingress packet header. An attacker could exploit this vulnerability by sending a crafted TLS/SSL packet to an interface on the targeted device. An exploit could allow the attacker to cause the device to reload, which will result in a denial of service (DoS) condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is required to exploit this vulnerability.

A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.

A vulnerability in the implementation of the Short Message Service (SMS) handling functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper processing of SMS protocol data units (PDUs) that are encoded with a special character set. An attacker could exploit this vulnerability by sending a malicious SMS message to an affected device. A successful exploit could allow the attacker to cause the wireless WAN (WWAN) cellular interface module on an affected device to crash, resulting in a DoS condition that would require manual intervention to restore normal operating conditions.

A vulnerability in the Session Initiation Protocol (SIP) call processing of Cisco Meeting Server (CMS) software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of the Cisco Meeting Server. The vulnerability is due to insufficient validation of Session Description Protocol (SDP) messages. An attacker could exploit this vulnerability by sending a crafted SDP message to the CMS call bridge. An exploit could allow the attacker to cause the CMS to reload, causing a DoS condition for all connected clients. Versions prior to 2.3.9 are affected.

A vulnerability in the Secure Shell (SSH) session management for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the SSH process is not properly deleted when an SSH connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly opening SSH connections to an affected device. A successful exploit could allow the attacker to exhaust system resources by initiating multiple SSH connections to the device that are not effectively terminated, which could result in a DoS condition.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54 and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). Cisco UCS 6200 and 6300 Fabric Interconnect devices are affected in versions prior to 3.2(2b).

A vulnerability in the UDP protocol implementation for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to exhaust system resources, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management for UDP ingress packets. An attacker could exploit this vulnerability by sending a high rate of UDP packets to an affected system within a short period of time. A successful exploit could allow the attacker to exhaust available system resources, resulting in a DoS condition.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a buffer overflow, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow, resulting in process crashes and a DoS condition on the device. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25), 8.1(1b), 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5) Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). UCS 6200, 6300, and 6400 Fabric Interconnects are affected running software versions prior to 3.2(3j) and 4.0(2a).