Editions of Rapid7 AppSpider Pro prior to version 6.14.060 contain a heap-based buffer overflow in the FLAnalyzer.exe component. A malicious or malformed Flash source file can cause a denial of service condition when parsed by this component, causing the application to crash.

A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455.

An issue was discovered in FIS GT.M through V7.0-000 (related to the YottaDB code base). Using crafted input, an attacker can cause a call to va_arg on an empty variadic parameter list, most likely causing a memory segmentation fault.

Cisco NX-OS 5.0 and earlier on MDS 9000 devices allows remote attackers to cause a denial of service (supervisor CPU consumption) via Authentication Header (AH) authentication in a Virtual Router Redundancy Protocol (VRRP) frame, aka Bug ID CSCte27874.

Buffer overflow in the RTPS dissector in Wireshark 1.8.x before 1.8.10 and 1.10.x before 1.10.2 allows remote attackers to cause a denial of service (application crash) via a crafted packet.

Stack-based buffer overflow in the getaddrinfo function in sysdeps/posix/getaddrinfo.c in GNU C Library (aka glibc or libc6) 2.18 and earlier allows remote attackers to cause a denial of service (crash) via a (1) hostname or (2) IP address that triggers a large number of AF_INET6 address results. NOTE: this vulnerability exists because of an incomplete fix for CVE-2013-1914.

The http_payload_subdissector function in epan/dissectors/packet-http.c in the HTTP dissector in Wireshark 1.6.x before 1.6.16 and 1.8.x before 1.8.8 does not properly determine when to use a recursive approach, which allows remote attackers to cause a denial of service (stack consumption) via a crafted packet.

Panda Global Protection 17.0.1 allows a system crash via a 0xb3702c44 \\.\PSMEMDriver DeviceIoControl request.

contrib/slapd-modules/nops/nops.c in OpenLDAP through 2.4.45, when both the nops module and the memberof overlay are enabled, attempts to free a buffer that was allocated on the stack, which allows remote attackers to cause a denial of service (slapd crash) via a member MODDN operation.

Heap-based buffer overflow in Sophos Anti-Virus and Endpoint Security before 6.0.5, Anti-Virus for Linux before 5.0.10, and other platforms before 4.11, when archive scanning is enabled, allows remote attackers to trigger a denial of service (memory corruption) via a CHM file with an LZX decompression header that specifies a Window_size of 0.

Array index error in the NBAP dissector in Wireshark 1.8.x before 1.8.8 allows remote attackers to cause a denial of service (application crash) via a crafted packet, related to nbap.cnf and packet-nbap.c.

The dissect_schedule_message function in epan/dissectors/packet-gsm_cbch.c in the GSM CBCH dissector in Wireshark 1.8.x before 1.8.8 allows remote attackers to cause a denial of service (infinite loop and application hang) via a crafted packet.

Varnish before 3.0.5 allows remote attackers to cause a denial of service (child-process crash and temporary caching outage) via a GET request with trailing whitespace characters and no URI.

SIP module in Huawei DP300 V500R002C00; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC400; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; RP200 V500R002C00SPC200; V600R006C00; V600R006C00SPC200; RSE6500 V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC300T; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC700; V500R002C00T; TE30 V100R001C10; V100R001C10SPC100; V100R001C10SPC200B010; V100R001C10SPC300; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700B010; V100R001C10SPC800; V500R002C00SPC200; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; TE40 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; TE50 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; TE60 V100R001C01SPC100; V100R001C01SPC107TB010; V100R001C10; V100R001C10SPC300; V100R001C10SPC400; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700; V100R001C10SPC800; V100R001C10SPC900; V500R002C00; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; V500R002C00SPCb00; V500R002C00SPCd00; V600R006C00; V600R006C00SPC100; V600R006C00SPC200; V600R006C00SPC300; TP3106 V100R002C00; V100R002C00SPC200; V100R002C00SPC400; V100R002C00SPC600; V100R002C00SPC700; V100R002C00SPC800; TP3206 V100R002C00; V100R002C00SPC200; V100R002C00SPC400; V100R002C00SPC600; V100R002C00SPC700; V100R002C10; ViewPoint 9030 V100R011C02SPC100; V100R011C03B012SP15; V100R011C03B012SP16; V100R011C03B015SP03; V100R011C03LGWL01SPC100; V100R011C03SPC100; V100R011C03SPC200; V100R011C03SPC300; V100R011C03SPC400; V100R011C03SPC500; eSpace U1960 V200R003C30SPC200; eSpace U1981 V100R001C20SPC700; V200R003C20SPCa00 has an overflow vulnerability that the module cannot parse a malformed SIP message when validating variables. Attacker can exploit it to make one process reboot at random.

The dissect_r3_upstreamcommand_queryconfig function in epan/dissectors/packet-assa_r3.c in the Assa Abloy R3 dissector in Wireshark 1.8.x before 1.8.8 does not properly handle a zero-length item, which allows remote attackers to cause a denial of service (infinite loop, and CPU and memory consumption) via a crafted packet.

Buffer overflow in the dane_query_tlsa function in the DANE library (libdane) in GnuTLS 3.1.x before 3.1.15 and 3.2.x before 3.2.5 allows remote servers to cause a denial of service (memory corruption) via a response with more than four DANE entries.

Stack-based buffer overflow in the reds_handle_ticket function in server/reds.c in SPICE 0.12.0 allows remote attackers to cause a denial of service (crash) via a long password in a SPICE ticket.

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A buffer overflow vulnerability exists in the router's web server (httpd). When processing the list parameters for a post request, the value is directly written with sprintf to a local variable placed on the stack, which overrides the return address of the function, causing a buffer overflow.

Huawei AR120-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR1200 V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR1200-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR150 V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR150-S V200R005C32, V200R007C00, V200R008C20, V200R008C30, AR160 V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR200 V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R008C20, V200R008C30, AR200-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, V200R008C30,AR2200 V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR2200-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR3200 V200R005C32, V200R006C10, V200R006C11, V200R007C00, V200R007C01, V200R007C02, V200R008C00, V200R008C10, V200R008C20, V200R008C30, AR3600 V200R006C10, V200R007C00, V200R007C01, V200R008C20, AR510 V200R005C32, V200R006C10, V200R007C00, V200R008C20, V200R008C30, NetEngine16EX V200R005C32, V200R006C10, V200R007C00, V200R008C20, V200R008C30, SRG1300 V200R005C32, V200R006C10, V200R007C00, V200R007C02, V200R008C20, V200R008C30, SRG2300 V200R005C32, V200R006C10, V200R007C00, V200R007C02, V200R008C20, V200R008C30, SRG3300 V200R005C32, V200R006C10, V200R007C00, V200R008C20, V200R008C30 have an out-of-bound read vulnerability in some Huawei products. Due to insufficient input validation, a remote, unauthenticated attacker may send crafted signature to the affected products. Successful exploit may cause buffer overflow, services abnormal.

ImportedSymbols in debug/macho (for Open or OpenFat) in Go before 1.16.10 and 1.17.x before 1.17.3 Accesses a Memory Location After the End of a Buffer, aka an out-of-bounds slice situation.

The ReverbConvolverStage::ReverbConvolverStage function in core/platform/audio/ReverbConvolverStage.cpp in the Web Audio implementation in Blink, as used in Google Chrome before 30.0.1599.66, allows remote attackers to cause a denial of service (out-of-bounds read) via vectors related to the impulseResponse array.

The dissect_ber_choice function in epan/dissectors/packet-ber.c in the ASN.1 BER dissector in Wireshark 1.6.x before 1.6.15 and 1.8.x before 1.8.7 does not properly initialize a certain variable, which allows remote attackers to cause a denial of service (application crash) via a malformed packet.

In Tidy 5.7.0, the prvTidyTidyMetaCharset function in clean.c allows attackers to cause a denial of service (Segmentation Fault), because the currentNode variable in the "children of the head" processing feature is modified in the loop without validating the new value.

An untrusted pointer dereference in mrb_vm_exec() of mruby v3.0.0 can lead to a segmentation fault or application crash.

core/rendering/svg/SVGInlineTextBox.cpp in the SVG implementation in Blink, as used in Google Chrome before 28.0.1500.71, allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

The OSIsoft PI Interface for IEEE C37.118 before 1.0.6.158 allows remote attackers to cause a denial of service (instance shutdown and data-collection outage) via crafted C37.118 configuration packets that trigger an invalid read operation.

The Enterprise version of SyncBreeze 10.2.12 and earlier is affected by a Remote Denial of Service vulnerability. The web server does not check bounds when reading server requests in the Host header on making a connection, resulting in a classic Buffer Overflow that causes a Denial of Service.

The DoResolveRelativeHost function in url/url_canon_relative.cc in Google Chrome before 30.0.1599.66 allows remote attackers to cause a denial of service (out-of-bounds read) via a relative URL containing a hostname, as demonstrated by a protocol-relative URL beginning with a //www.google.com/ substring.

Buffer overflow in KDSMAIN in the Basic Services component in IBM Tivoli Monitoring (ITM) 6.2.0 through FP3, 6.2.1 through FP4, 6.2.2 through FP9, and 6.2.3 before FP3, as used in IBM Application Manager for Smart Business (formerly Tivoli Foundations Application Manager) 1.2.1 before 1.2.1.0-TIV-IAMSB-FP0004 and other products, allows remote attackers to cause a denial of service (segmentation fault) via a crafted http URL.

Google Chrome before 28.0.1500.71 allows remote attackers to cause a denial of service (out-of-bounds read) via vectors related to the handling of text.

Huawei AR120-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR1200 V200R006C10, V200R006C13, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR1200-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR150 V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR150-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR160 V200R006C10, V200R006C12, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR200 V200R006C10, V200R007C00, V200R007C01, V200R008C20, V200R008C30, AR200-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR2200 V200R006C10, V200R006C13, V200R006C16, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR2200-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR3200 V200R006C10, V200R006C11, V200R007C00, V200R007C01, V200R007C02, V200R008C00, V200R008C10, V200R008C20, V200R008C30, AR3600 V200R006C10, V200R007C00, V200R007C01, V200R008C20, AR510 V200R006C10, V200R006C12, V200R006C13, V200R006C15, V200R006C16, V200R006C17, V200R007C00, V200R008C20, V200R008C30, DP300 V500R002C00, NetEngine16EX V200R006C10, V200R007C00, V200R008C20, V200R008C30, RP200 V500R002C00, V600R006C00, SRG1300 V200R006C10, V200R007C00, V200R007C02, V200R008C20, V200R008C30, SRG2300 V200R006C10, V200R007C00, V200R007C02, V200R008C20, V200R008C30, SRG3300 V200R006C10, V200R007C00, V200R008C20, V200R008C30, TE30 V100R001C02, V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C01, V100R001C10, V500R002C00, V600R006C00, TP3106 V100R002C00, TP3206 V100R002C00, V100R002C10, ViewPoint 9030 V100R011C02, V100R011C03 have a buffer overflow vulnerability. An unauthenticated, remote attacker may send specially crafted certificates to the affected products. Due to insufficient validation of the certificates, successful exploit may cause buffer overflow and some service abnormal.

The Window.prototype object implementation in Google Chrome before 30.0.1599.66 allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

An exploitable memory corruption vulnerability exists in the Name Service Client functionality of 3S-Smart Software Solutions CODESYS GatewayService. A specially crafted packet can cause a large memcpy, resulting in an access violation and termination of the process. An attacker can send a packet to a device running the GatewayService.exe to trigger this vulnerability. All variants of the CODESYS V3 products in all versions prior V3.5.16.10 containing the CmpRouter or CmpRouterEmbedded component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PLCnext, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control RTE V3, CODESYS Control RTE V3 (for Beckhoff CX), CODESYS Control Win V3 (also part of the CODESYS Development System setup), CODESYS Control V3 Runtime System Toolkit, CODESYS V3 Embedded Target Visu Toolkit, CODESYS V3 Remote Target Visu Toolkit, CODESYS V3 Safety SIL2, CODESYS Edge Gateway V3, CODESYS Gateway V3, CODESYS HMI V3, CODESYS OPC Server V3, CODESYS PLCHandler SDK, CODESYS V3 Simulation Runtime (part of the CODESYS Development System).

Backup feature of SIP module in Huawei DP300 V500R002C00; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC400; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; RP200 V500R002C00SPC200; V600R006C00; V600R006C00SPC200; RSE6500 V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC300T; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC700; V500R002C00T; TE30 V100R001C10; V100R001C10SPC100; V100R001C10SPC200B010; V100R001C10SPC300; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700B010; V100R001C10SPC800; V500R002C00SPC200; V500R002C00SPC500; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; TE40 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC900; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; TE50 V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPCb00; V600R006C00; V600R006C00SPC200; TE60 V100R001C01SPC100; V100R001C01SPC107TB010; V100R001C10; V100R001C10SPC300; V100R001C10SPC400; V100R001C10SPC500; V100R001C10SPC600; V100R001C10SPC700; V100R001C10SPC800; V100R001C10SPC900; V500R002C00; V500R002C00SPC100; V500R002C00SPC200; V500R002C00SPC300; V500R002C00SPC600; V500R002C00SPC700; V500R002C00SPC800; V500R002C00SPC900; V500R002C00SPCa00; V500R002C00SPCb00; V500R002C00SPCd00; V600R006C00; V600R006C00SPC100; V600R006C00SPC200; V600R006C00SPC300; TP3106 V100R002C00; V100R002C00SPC200; V100R002C00SPC400; V100R002C00SPC600; V100R002C00SPC700; V100R002C00SPC800; TP3206 V100R002C00; V100R002C00SPC200; V100R002C00SPC400; V100R002C00SPC600; V100R002C00SPC700; V100R002C10; ViewPoint 9030 V100R011C02SPC100; V100R011C03B012SP15; V100R011C03B012SP16; V100R011C03B015SP03; V100R011C03LGWL01SPC100; V100R011C03SPC100; V100R011C03SPC200; V100R011C03SPC300; V100R011C03SPC400; V100R011C03SPC500; eSpace U1960 V200R003C30SPC200; eSpace U1981 V100R001C20SPC700; V200R003C20SPCa00 has an overflow vulnerability when the module process a specific amount of state. The module cannot handle it causing SIP module DoS.

MariaDB 5.5.x before 5.5.30, 5.3.x before 5.3.13, 5.2.x before 5.2.15, and 5.1.x before 5.1.68, and Oracle MySQL 5.1.69 and earlier, 5.5.31 and earlier, and 5.6.11 and earlier allows remote attackers to cause a denial of service (crash) via a crafted geometry feature that specifies a large number of points, which is not properly handled when processing the binary representation of this feature, related to a numeric calculation error.

The deepGetOrCreateNode function in impl/operations/AbstractCreateOperation.java in org.apache.sling.servlets.post.bundle 2.2.0 and 2.3.0 in Apache Sling does not properly handle a NULL value that returned when the session does not have permissions to the root node, which allows remote attackers to cause a denial of service (infinite loop) via unspecified vectors.

A stack buffer overflow flaw was found in the way 389-ds-base 1.3.6.x before 1.3.6.13, 1.3.7.x before 1.3.7.9, 1.4.x before 1.4.0.5 handled certain LDAP search filters. A remote, unauthenticated attacker could potentially use this flaw to make ns-slapd crash via a specially crafted LDAP request, thus resulting in denial of service.

The SIP backup feature in Huawei DP300 V500R002C00, IPS Module V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, NGFW Module V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R002C00, V500R002C10, NIP6300 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6600 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6800 V500R001C50, RP200 V500R002C00, V600R006C00, SVN5600 V200R003C00, V200R003C10, SVN5800 V200R003C00, V200R003C10, SVN5800-C V200R003C00, V200R003C10, SeMG9811 V300R001C01, Secospace USG6300 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, Secospace USG6500 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, Secospace USG6600 V100R001C00, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, TE30 V100R001C02, V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C01, V100R001C10, V500R002C00, V600R006C00, USG9500 V500R001C00, V500R001C20, V500R001C30, USG9520 V300R001C01, V300R001C20, USG9560 V300R001C01, V300R001C20, USG9580 V300R001C01, V300R001C20, VP9660 V200R001C02, V200R001C30, V500R002C00, V500R002C10, ViewPoint 8660 V100R008C03, ViewPoint 9030 V100R011C02, V100R011C03, eSpace U1981 V100R001C20, V200R003C00, V200R003C20, V200R003C30 has a buffer overflow vulnerability. An attacker may send specially crafted messages to the affected products. Due to the insufficient validation of some values for SIP messages, successful exploit may cause services abnormal.

Huawei DP300 V500R002C00, TE60 V600R006C00, TP3106 V100R002C00, eSpace U1981 V200R003C30SPC100 have a denial of service vulnerability. The software does not correctly calculate the rest size in a buffer when handling SSL connections. A remote unauthenticated attacker could send a lot of crafted SSL messages to the device, successful exploit could cause no space in the buffer and then denial of service.

libcurl may read outside of a heap allocated buffer when doing FTP. When libcurl connects to an FTP server and successfully logs in (anonymous or not), it asks the server for the current directory with the `PWD` command. The server then responds with a 257 response containing the path, inside double quotes. The returned path name is then kept by libcurl for subsequent uses. Due to a flaw in the string parser for this directory name, a directory name passed like this but without a closing double quote would lead to libcurl not adding a trailing NUL byte to the buffer holding the name. When libcurl would then later access the string, it could read beyond the allocated heap buffer and crash or wrongly access data beyond the buffer, thinking it was part of the path. A malicious server could abuse this fact and effectively prevent libcurl-based clients to work with it - the PWD command is always issued on new FTP connections and the mistake has a high chance of causing a segfault. The simple fact that this has issue remained undiscovered for this long could suggest that malformed PWD responses are rare in benign servers. We are not aware of any exploit of this flaw. This bug was introduced in commit [415d2e7cb7](https://github.com/curl/curl/commit/415d2e7cb7), March 2005. In libcurl version 7.56.0, the parser always zero terminates the string but also rejects it if not terminated properly with a final double quote.

A vulnerability has been identified in SIMATIC S7-400 CPU 412-1 DP V7 (All versions), SIMATIC S7-400 CPU 412-2 DP V7 (All versions), SIMATIC S7-400 CPU 412-2 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 414-2 DP V7 (All versions), SIMATIC S7-400 CPU 414-3 DP V7 (All versions), SIMATIC S7-400 CPU 414-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 414F-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 416-2 DP V7 (All versions), SIMATIC S7-400 CPU 416-3 DP V7 (All versions), SIMATIC S7-400 CPU 416-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 416F-2 DP V7 (All versions), SIMATIC S7-400 CPU 416F-3 PN/DP V7 (All versions < V7.0.3), SIMATIC S7-400 CPU 417-4 DP V7 (All versions), SIMATIC S7-400 H V6 CPU family (incl. SIPLUS variants) (All versions < V6.0.10), SIMATIC S7-410 V10 CPU family (incl. SIPLUS variants) (All versions < V10.1), SIMATIC S7-410 V8 CPU family (incl. SIPLUS variants) (All versions < V8.2.3), SIPLUS S7-400 CPU 414-3 PN/DP V7 (All versions < V7.0.3), SIPLUS S7-400 CPU 416-3 PN/DP V7 (All versions < V7.0.3), SIPLUS S7-400 CPU 416-3 V7 (All versions), SIPLUS S7-400 CPU 417-4 V7 (All versions). Affected devices improperly handle specially crafted packets sent to port 102/tcp. This could allow an attacker to create a Denial-of-Service condition. A restart is needed to restore normal operations.

The XML libraries for Python 3.4, 3.3, 3.2, 3.1, 2.7, and 2.6, as used in OpenStack Keystone Essex, Folsom, and Grizzly; Compute (Nova) Essex and Folsom; Cinder Folsom; Django; and possibly other products allow remote attackers to cause a denial of service (resource consumption and crash) via an XML Entity Expansion (XEE) attack.

The SIP backup feature in Huawei DP300 V500R002C00, IPS Module V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, NGFW Module V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R002C00, V500R002C10, NIP6300 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6600 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6800 V500R001C50, RP200 V500R002C00, V600R006C00, SVN5600 V200R003C00, V200R003C10, SVN5800 V200R003C00, V200R003C10, SVN5800-C V200R003C00, V200R003C10, SeMG9811 V300R001C01, Secospace USG6300 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, Secospace USG6500 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, Secospace USG6600 V100R001C00, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, TE30 V100R001C02, V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C01, V100R001C10, V500R002C00, V600R006C00, USG9500 V500R001C00, V500R001C20, V500R001C30, USG9520 V300R001C01, V300R001C20, USG9560 V300R001C01, V300R001C20, USG9580 V300R001C01, V300R001C20, VP9660 V200R001C02, V200R001C30, V500R002C00, V500R002C10, ViewPoint 8660 V100R008C03, ViewPoint 9030 V100R011C02, V100R011C03, eSpace U1981 V100R001C20, V200R003C00, V200R003C20, V200R003C30 has a buffer overflow vulnerability. An attacker may send specially crafted messages to the affected products. Due to the insufficient validation of some values for SIP messages, successful exploit may cause services abnormal.

Heap-based buffer overflow in the php_quot_print_encode function in ext/standard/quot_print.c in PHP before 5.3.26 and 5.4.x before 5.4.16 allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted argument to the quoted_printable_encode function.

Stack-based buffer overflow in the getaddrinfo function in sysdeps/posix/getaddrinfo.c in GNU C Library (aka glibc or libc6) 2.17 and earlier allows remote attackers to cause a denial of service (crash) via a (1) hostname or (2) IP address that triggers a large number of domain conversion results.

The mod_dav_svn Apache HTTPD server module in Subversion 1.7.0 through 1.7.8 allows remote attackers to cause a denial of service (segmentation fault and crash) via a log REPORT request with an invalid limit, which triggers an access of an uninitialized variable.

Google Chrome before 24.0.1312.52 allows remote attackers to cause a denial of service (out-of-bounds read) via vectors related to printing.

The SIP backup feature in Huawei DP300 V500R002C00, IPS Module V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, NGFW Module V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R002C00, V500R002C10, NIP6300 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6600 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6800 V500R001C50, RP200 V500R002C00, V600R006C00, SVN5600 V200R003C00, V200R003C10, SVN5800 V200R003C00, V200R003C10, SVN5800-C V200R003C00, V200R003C10, SeMG9811 V300R001C01, Secospace USG6300 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, Secospace USG6500 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, Secospace USG6600 V100R001C00, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, TE30 V100R001C02, V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C01, V100R001C10, V500R002C00, V600R006C00, USG9500 V500R001C00, V500R001C20, V500R001C30, USG9520 V300R001C01, V300R001C20, USG9560 V300R001C01, V300R001C20, USG9580 V300R001C01, V300R001C20, VP9660 V200R001C02, V200R001C30, V500R002C00, V500R002C10, ViewPoint 8660 V100R008C03, ViewPoint 9030 V100R011C02, V100R011C03, eSpace U1981 V100R001C20, V200R003C00, V200R003C20, V200R003C30 has a buffer overflow vulnerability. An attacker may send specially crafted messages to the affected products. Due to the insufficient validation of some values for SIP messages, successful exploit may cause services abnormal.

The NAT process on Cisco Adaptive Security Appliances (ASA) devices allows remote attackers to cause a denial of service (connections-table memory consumption) via crafted packets, aka Bug ID CSCue46386.