OS Command Injection vulnerability in the wirelessConnect handler of Abode iota All-In-One Security Kit allows an attacker to inject commands and gain root access. This issue affects: Abode iota All-In-One Security Kit versions prior to 1.0.2.23_6.9V_dev_t2_homekit_RF_2.0.19_s2_kvsABODE oz.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Restore Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_restore configRestore or configServerip parameter.

OKER G232V1 v1.03.02.20161129 devices provide a root terminal on a UART serial interface without proper access control. This allows attackers with physical access to interrupt the boot sequence in order to execute arbitrary commands with root privileges and conduct further attacks.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.

An issue was discovered in Xen through 4.12.x allowing attackers to gain host OS privileges via DMA in a situation where an untrusted domain has access to a physical device. This occurs because passed through PCI devices may corrupt host memory after deassignment. When a PCI device is assigned to an untrusted domain, it is possible for that domain to program the device to DMA to an arbitrary address. The IOMMU is used to protect the host from malicious DMA by making sure that the device addresses can only target memory assigned to the guest. However, when the guest domain is torn down, or the device is deassigned, the device is assigned back to dom0, thus allowing any in-flight DMA to potentially target critical host data. An untrusted domain with access to a physical device can DMA into host memory, leading to privilege escalation. Only systems where guests are given direct access to physical devices capable of DMA (PCI pass-through) are vulnerable. Systems which do not use PCI pass-through are not vulnerable.

A vulnerability in the CLI of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input at the CLI. An attacker could exploit this vulnerability by authenticating with the administrator password via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges.

The Citrix Receiver wrapper function does not safely handle user supplied input, which may be leveraged by an attacker to inject commands that will execute with local user privileges.

A vulnerability in the command-line interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker with read-only credentials to inject arbitrary commands that could allow them to obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input on the command-line interface. An attacker could exploit this vulnerability by authenticating with read-only privileges via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow an attacker to execute arbitrary commands on the device with root privileges.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities.

A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and issue arbitrary commands to elevate the attacker's privilege level. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions in the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands to elevate the attacker's privilege level. To exploit this vulnerability, the attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with elevated privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected commands. An exploit could allow the attacker to gain root privileges on the affected device.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

An Improper Neutralization of Special Elements used in a Command vulnerability in one of FortiClient for Mac OS root processes, may allow a local user of the system on which FortiClient is running to execute unauthorized code as root by bypassing a security check.

A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. NX-OS versions prior to 8.3(1) are affected.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco Aironet Series Access Points (APs) could allow an authenticated, local attacker to gain access to the underlying Linux operating system (OS) without the proper authentication. The attacker would need valid administrator device credentials. The vulnerability is due to improper validation of user-supplied input for certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input for a CLI command. A successful exploit could allow the attacker to obtain access to the underlying Linux OS without proper authentication.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system of an attached line card with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of an attached line card with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop Parallels Desktop version 14.1.3 (45485). An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Parallels Service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of root. Was ZDI-CAN-8685.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in Cisco DNA Spaces: Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. The vulnerability is due to insufficient restrictions during the execution of an affected CLI command. An attacker could exploit this vulnerability by leveraging the insufficient restrictions to modify sensitive files. A successful exploit could allow the attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root.

A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d).

A system command injection vulnerability in the FortiAP-S/W2 6.2.1, 6.2.0, 6.0.5 and below, FortiAP 6.0.5 and below and FortiAP-U below 6.0.0 under CLI admin console may allow unauthorized administrators to run arbitrary system level commands via specially crafted ifconfig commands.

A vulnerability in the CLI configuration shell of Cisco Meeting Server could allow an authenticated, local attacker to inject arbitrary commands as the root user. The vulnerability is due to insufficient input validation during the execution of a vulnerable CLI command. An attacker with administrator-level credentials could exploit this vulnerability by injecting crafted arguments during command execution. A successful exploit could allow the attacker to perform arbitrary code execution as root on an affected product.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to perform command injections. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating as an administrative level user within the restricted shell and submitting malicious input to a specific command. A successful exploit could allow the attacker to execute previously staged code from the underlying filesystem.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Stand are affected running software versions prior to 7.0(3)F3(5).

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to execute code with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating as the remote support user and sending malicious traffic to a listener who is internal to the device. A successful exploit could allow the attacker to execute commands with root privileges.

Linux Dash up to version v2 is vulnerable to multiple command injection vulnerabilities in the way module names are parsed and then executed resulting in code execution on the server, potentially as root.

The Tecno Camon Android device with a build fingerprint of TECNO/H622/TECNO-ID5b:8.1.0/O11019/G-180829V31:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

Multiple vulnerabilities in the CLI of Cisco FXOS Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute commands on the underlying operating system (OS) with root privileges. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by including crafted arguments to specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.

A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for Linux and macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The PIA Linux/macOS binary openvpn_launcher.64 binary is setuid root. This binary accepts several parameters to update the system configuration. These parameters are passed to operating system commands using a "here" document. The parameters are not sanitized, which allow for arbitrary commands to be injected using shell metacharacters. A local unprivileged user can pass special crafted parameters that will be interpolated by the operating system calls.

A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges, which may lead to complete system compromise. An attacker would need valid administrator credentials to exploit this vulnerability.

Visteon Infotainment REFLASH_DDU_ExtractFile Command Injection Remote Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Visteon Infotainment systems. Authentication is not required to exploit this vulnerability. The specific flaw exists within the REFLASH_DDU_ExtractFile function. A crafted software update file can trigger execution of a system call composed from a user-supplied string. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23421.

A vulnerability in Cisco DNA Spaces: Connector could allow an authenticated, local attacker to perform a command injection attack and execute arbitrary commands on the underlying operating system as root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command. An attacker could exploit this vulnerability by including malicious input during the execution of the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as root.

A vulnerability in the CLI of Cisco Unity Express could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. To exploit this vulnerability, an attacker would need valid administrator credentials. The vulnerability is due to improper input validation for certain CLI commands that are executed on a vulnerable system. An attacker could exploit this vulnerability by logging in to the system and sending crafted CLI commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root.

The Tecno Camon iClick Android device with a build fingerprint of TECNO/H633/TECNO-IN6:8.1.0/O11019/A-180409V96:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.8). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

An issue was discovered on DCN (Digital China Networks) S4600-10P-SI devices before R0241.0470. Due to improper parameter validation in the console interface, it is possible for a low-privileged authenticated attacker to escape the sandbox environment and execute system commands as root via shell metacharacters in the capture command parameters. Command output will be shown on the Serial interface of the device. Exploitation requires both credentials and physical access.

The Tecno Camon Android device with a build fingerprint of TECNO/H612/TECNO-ID5a:8.1.0/O11019/F-180828V106:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating as the remote support user and submitting malicious input to a specific command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with root privileges.

An exploitable code execution vulnerability exists in the connect functionality of NordVPN 6.14.28.0. A specially crafted configuration file can cause a privilege escalation, resulting in the execution of arbitrary commands with system privileges.

An exploitable vulnerability exists in the verified boot protection of the CUJO Smart Firewall. It is possible to add arbitrary shell commands into the dhcpd.conf file, that persist across reboots and firmware updates, and thus allow for executing unverified commands. To trigger this vulnerability, a local attacker needs to be able to write into /config/dhcpd.conf.

An exploitable command injection vulnerability exists in the gplotMakeOutput function of Leptonica 1.74.4. A specially crafted gplot rootname argument can cause a command injection resulting in arbitrary code execution. An attacker can provide a malicious path as input to an application that passes attacker data to this function to trigger this vulnerability.