The BGP implementation in Cisco NX-OS does not properly filter segment types in AS paths, which allows remote attackers to cause a denial of service (BGP service reset) via a malformed UPDATE message, aka Bug ID CSCtn13043.

The local file editor in the Baseboard Management Controller (BMC) in Cisco Unified Computing System (UCS) allows local users to gain privileges and modify arbitrary fabric-interconnect files, in the context of a vi process, via unspecified commands, aka Bug ID CSCtn06574.

The BGP implementation in Cisco NX-OS does not properly filter AS paths, which allows remote attackers to cause a denial of service (BGP service reset and resync) via a malformed UPDATE message, aka Bug ID CSCtn13065.

The fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (component crash) via crafted "debug hardware" parameters, aka Bug ID CSCtq86468.

Cisco NX-OS allows local users to gain privileges and execute arbitrary commands via shell metacharacters in a command that calls the system library function, aka Bug IDs CSCtf23559 and CSCtf27780.

ethanalyzer in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq02686.

The local file editor in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges, and read or modify arbitrary files, via unspecified key bindings, aka Bug ID CSCtn04521.

The clear sshkey command in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq86559.

The SIP implementation in Cisco Unified Communications Manager (CUCM) 6.x and 7.x before 7.1(5b)su5, 8.x before 8.5(1)su4, and 8.6 before 8.6(2a)su1; Cisco IOS 12.2 through 12.4 and 15.0 through 15.2; and Cisco IOS XE 3.3.xSG before 3.3.1SG, 3.4.xS, and 3.5.xS allows remote attackers to cause a denial of service (service crash or device reload) via a crafted SIP message containing an SDP session description, aka Bug IDs CSCtw66721, CSCtj33003, and CSCtw84664.

The activate firmware command in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq02600.

The Manager component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service via an invalid Smart Call Home contact address, aka Bug ID CSCtl00186.

The management interface in the Central Software component in Cisco Unified Computing System (UCS) does not properly validate the identity of vCenter consoles, which allows man-in-the-middle attackers to read or modify an inter-device data stream by spoofing an identity, aka Bug ID CSCtk00683.

Cisco IOS before 15.1(1)SY, when Multicast Listener Discovery (MLD) snooping is enabled, allows remote attackers to cause a denial of service (CPU consumption or device crash) via MLD packets on a network that contains many IPv6 hosts, aka Bug ID CSCtr88193.

A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783.

A vulnerability in the web proxy functionality of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to forward traffic from the web proxy interface of an affected device to the administrative management interface of an affected device, aka an Access Control Bypass Vulnerability. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88863. Known Affected Releases: 10.1.0-204 9.0.0-485.

Cisco IP Communicator 8.6 allows man-in-the-middle attackers to modify the Certificate Trust List via unspecified vectors, aka Bug ID CSCtz01471.

Cisco IOS XR before 4.2.1 on ASR 9000 series devices and CRS series devices allows remote attackers to cause a denial of service (packet transmission outage) via a crafted packet, aka Bug IDs CSCty94537 and CSCtz62593.

A vulnerability in Session Initiation Protocol (SIP) call handling of Cisco IP Phone 8800 Series devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the SIP process unexpectedly restarting. All active phone calls are dropped as the SIP process restarts. More Information: CSCvc29353. Known Affected Releases: 11.0(0.1). Known Fixed Releases: 11.0(0)MP2.153 11.0(0)MP2.62.

The HostScan downloader implementation in Cisco AnyConnect Secure Mobility Client 3.x before 3.0 MR8 and Cisco Secure Desktop before 3.6.6020 does not compare the timestamp of offered software to the timestamp of installed software, which allows remote attackers to force a version downgrade by using (1) ActiveX or (2) Java components to offer signed code that corresponds to an older software release, aka Bug ID CSCtx74235.

Cisco IOS before 15.1(1)SY on ASR 1000 devices, when Multicast Listener Discovery (MLD) tracking is enabled for IPv6, allows remote attackers to cause a denial of service (device reload) via crafted MLD packets, aka Bug ID CSCtz28544.

Cisco IOS 12.2 through 12.4 and 15.0 does not recognize the vrf-also keyword during enforcement of access-class commands, which allows remote attackers to establish TELNET connections from arbitrary source IP addresses via a standard TELNET client, aka Bug ID CSCsi77774.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(2.11) and 8.5 before 8.5(1.4) allow remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger syslog message 305006, aka Bug ID CSCts39634.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 through 7.2 before 7.2(5.7), 8.0 before 8.0(5.27), 8.1 before 8.1(2.53), 8.2 before 8.2(5.8), 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.2) and the Firewall Services Module (FWSM) 3.1 and 3.2 before 3.2(23) and 4.0 and 4.1 before 4.1(8) in Cisco Catalyst 6500 series devices, when multicast routing is enabled, allow remote attackers to cause a denial of service (device reload) via a crafted IPv4 PIM message, aka Bug IDs CSCtr47517 and CSCtu97367.

The UDP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.5), 8.3 before 8.3(2.22), 8.4 before 8.4(2.1), and 8.5 before 8.5(1.2) does not properly handle flows, which allows remote attackers to cause a denial of service (device reload) via a crafted series of (1) IPv4 or (2) IPv6 UDP packets, aka Bug ID CSCtq10441.

Cisco IronPort Web Security Appliance up to and including 7.5 does not validate the basic constraints of the certificate authority which could lead to MITM attacks

The MallocLite implementation in Cisco IOS 12.0, 12.2, 15.0, 15.1, and 15.2 allows remote attackers to cause a denial of service (Route Processor crash) via a BGP UPDATE message with a modified local-preference (aka LOCAL_PREF) attribute length, aka Bug ID CSCtq06538.

A certain Java applet in the VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 3.x before 3.0 MR7 on 64-bit Linux platforms does not properly restrict use of Java components, which allows remote attackers to execute arbitrary code via a crafted web site, aka Bug ID CSCty45925.

Cisco IronPort Web Security Appliance AsyncOS software prior to 7.5 has a SSL Certificate Caching vulnerability which could allow man-in-the-middle attacks

A vulnerability in the web framework of the Cisco TelePresence IX5000 Series could allow an unauthenticated, remote attacker to access arbitrary files on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using directory traversal techniques to read files within the Cisco TelePresence IX5000 Series filesystem. This vulnerability affects Cisco TelePresence IX5000 Series devices running software version 8.2.0. Cisco Bug IDs: CSCvc52325.

A vulnerability in the remote management access control list (ACL) feature of the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass the remote management ACL. The vulnerability is due to incorrect implementation of the ACL decision made during the ingress connection request to the remote management interface. An attacker could exploit this vulnerability by sending a connection to the management IP address or domain name of the targeted device. A successful exploit could allow the attacker to bypass the configured remote management ACL. This can occur when the Remote Management configuration parameter is set to Disabled. This vulnerability affects Cisco CVR100W Wireless-N VPN Routers running a firmware image prior to 1.0.1.24. Cisco Bug IDs: CSCvc14457.

A vulnerability in the XSI-Actions interface of Cisco BroadWorks Application Server could allow an authenticated, remote attacker to access sensitive information on an affected system. This vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the XSI-Actions interface. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to join a Call Center instance and have calls that they do not have permissions to access distributed to them from the Call Center queue. At the time of publication, Cisco had not released updates that address this vulnerability for Cisco BroadWorks Application Server. However, firmware patches are available.

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.

A vulnerability in the file download functions for Cisco Prime Collaboration Assurance could allow an authenticated, remote attacker to download system files that should be restricted. More Information: CSCvc99446. Known Affected Releases: 11.5(0).

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. This vulnerability is due to improper input validation of SQL queries to an affected system. An attacker could exploit this vulnerability by authenticating to the application and sending malicious SQL queries to an affected system. A successful exploit could allow the attacker to modify values on or return values from the vManage database or the underlying operating system.Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Integrated Management Controller in Cisco Unified Computing System 2.2(2c)A and earlier allows local users to obtain shell access via a crafted map-nfs command, aka Bug ID CSCup05998.

The TACACS+ command-authorization implementation in Cisco NX-OS allows local users to cause a denial of service (device reload) via a long CLI command, aka Bug ID CSCur54182.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Web Appliance could allow an authenticated, remote attacker to perform command injection attacks against an affected device. The attacker must authenticate with valid administrator credentials. This vulnerability is due to insufficient validation of XML configuration files by an affected device. An attacker could exploit this vulnerability by uploading a crafted XML configuration file. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

A vulnerability in the Layer 3 multicast feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed IPv4 multicast packets that are received on line cards where the interface has either an IPv4 access control list (ACL) or a QoS policy applied. An attacker could exploit this vulnerability by sending crafted IPv4 multicast packets through an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset. Traffic over that line card would be lost while the line card reloads.

A vulnerability in a policy-based Cisco Application Visibility and Control (AVC) implementation of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to evade the antivirus scanner and download a malicious file onto an endpoint.  The vulnerability is due to improper handling of a crafted range request header. An attacker could exploit this vulnerability by sending an HTTP request with a crafted range request header through the affected device. A successful exploit could allow the attacker to evade the antivirus scanner and download malware onto the endpoint without detection by Cisco Secure Web Appliance.

A vulnerability in the Spam Quarantine feature of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Email and Web Manager could allow an unauthenticated, remote attacker to execute arbitrary system commands on an affected device with root privileges. This vulnerability is due to insufficient validation of HTTP requests by the Spam Quarantine feature. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco FTD Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands with root privileges on the underlying operating system of an affected device.  This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute commands with root privileges on the underlying operating system. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the CLI of Cisco UCS Central Software could allow an authenticated, local attacker to gain shell access. The vulnerability is due to insufficient input validation of commands entered in the CLI, aka a Restricted Shell Break Vulnerability. An attacker could exploit this vulnerability by entering a specific command with crafted arguments. An exploit could allow the attacker to gain shell access to the underlying system. Cisco Bug IDs: CSCve70762.

An untrusted search path (aka DLL Preload) vulnerability in the Cisco Network Academy Packet Tracer software could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability.