A vulnerability has been identified in DIGSI 4 (All versions < V4.92), EN100 Ethernet module DNP3 variant (All versions < V1.05.00), EN100 Ethernet module IEC 104 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.30), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). The device engineering mechanism allows an unauthenticated remote user to upload a modified device configuration overwriting access authorization passwords.

A broken access control vulnerability found in Advan VD-1 firmware versions up to 230. An attacker can send a POST request to cgibin/ApkUpload.cgi to install arbitrary APK without any authentication.

LS ELECTRIC XBC-DN32U with operating system version 01.80 is missing authentication to perform critical functions to the PLC. This could allow an attacker to change the PLC's mode arbitrarily.

An issue was discovered in GitLab Enterprise Edition 11.2.x through 11.4.x before 11.4.13, 11.5.x before 11.5.6, and 11.6.x before 11.6.1. It has Incorrect Access Control.

In ApexPro Telemetry Server Versions 4.2 and prior, CARESCAPE Telemetry Server v4.2 & prior, Clinical Information Center (CIC) Versions 4.X and 5.X, CARESCAPE Central Station (CSCS) Versions 1.X and CARESCAPE Central Station (CSCS) Versions 2.X, the integrated service for keyboard switching of the affected devices could allow attackers to obtain remote keyboard input access without authentication over the network.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

A vulnerability in an access control mechanism of Cisco Cyber Vision Center Software could allow an unauthenticated, remote attacker to bypass authentication and access internal services that are running on an affected device. The vulnerability is due to insufficient enforcement of access control in the software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow an attacker to impact monitoring of sensors that are managed by the software.

A vulnerability in the API of Cisco Application Services Engine Software could allow an unauthenticated, remote attacker to update event policies on an affected device. The vulnerability is due to insufficient authentication of users who modify policies on an affected device. An attacker could exploit this vulnerability by crafting a malicious HTTP request to contact an affected device. A successful exploit could allow the attacker to update event policies on the affected device.

getgps data in iTrack Easy can be modified without authentication by setting the data using the parametercmd:setothergps. This vulnerability can be exploited to alter the GPS data of a lost device.

Delta Electronics InfraSuite Device Master versions 00.00.01a and prior allow unauthenticated users to trigger the WriteConfiguration method, which could allow an attacker to provide new values for user configuration files such as UserListInfo.xml. This could lead to the changing of administrative passwords.

Delta Electronics InfraSuite Device Master versions 00.00.01a and prior lack proper authentication for functions that create and modify user groups. An attacker could provide malicious serialized objects that could run these functions without authentication to create a new user and add them to the administrator group.

An access control issue in Canaan Avalon ASIC Miner 2020.3.30 and below allows unauthenticated attackers to arbitrarily change user passwords via a crafted POST request.

An issue was discovered in Couchbase Server before 7.0.4. The Index Service does not enforce authentication for TCP/TLS servers.

Missing authentication when creating and managing the B&R APROL database in versions < R 4.2-07 allows reading and changing the system configuration. 

A vulnerability, which was classified as critical, has been found in 20120630 Novel-Plus up to 0e156c04b4b7ce0563bef6c97af4476fcda8f160. This issue affects the function addCrawlSource of the file novel-crawl/src/main/java/com/java2nb/novel/controller/CrawlController.java. The manipulation leads to missing authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in SICAM GridEdge Essential ARM (All versions < V2.6.6), SICAM GridEdge Essential Intel (All versions < V2.6.6), SICAM GridEdge Essential with GDS ARM (All versions < V2.6.6), SICAM GridEdge Essential with GDS Intel (All versions < V2.6.6). The affected software does not require authenticated access for privileged functions. This could allow an unauthenticated attacker to change data of an user, such as credentials, in case that user's id is known.

A vulnerability has been identified in SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00). Affected devices do not restrict unauthenticated access to certain pages of the web interface. This could allow an attacker to delete log files without authentication.

SAP Process Integration, business-to-business add-on, versions 1.0, 2.0, does not perform authentication check properly when the default security provider is changed to BouncyCastle (BC), leading to Missing Authentication Check

VDSM and libvirt in Red Hat Enterprise Virtualization Hypervisor (aka RHEV-H) 7-7.x before 7-7.2-20151119.0 and 6-6.x before 6-6.7-20151117.0 as packaged in Red Hat Enterprise Virtualization before 3.5.6 when VSDM is run with -spice disable-ticketing and a VM is suspended and then restored, allows remote attackers to log in without authentication via unspecified vectors.

The Motorola MOSCAD and ACE line of RTUs through 2022-05-02 omit an authentication requirement. They feature IP Gateway modules which allow for interfacing between Motorola Data Link Communication (MDLC) networks (potentially over a variety of serial, RF and/or Ethernet links) and TCP/IP networks. Communication with RTUs behind the gateway is done by means of the proprietary IPGW protocol (5001/TCP). This protocol does not have any authentication features, allowing any attacker capable of communicating with the port in question to invoke (a subset of) desired functionality.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

A Missing Authentication for Critical Function vulnerability in B. Braun SpaceCom2 prior to 012U000062 allows a remote attacker to reconfigure the device from an unknown source because of lack of authentication on proprietary networking commands.

Apache Hive before 3.1.3 "CREATE" and "DROP" function operations does not check for necessary authorization of involved entities in the query. It was found that an unauthorized user can manipulate an existing UDF without having the privileges to do so. This allowed unauthorized or underprivileged users to drop and recreate UDFs pointing them to new jars that could be potentially malicious.

A vulnerability has been identified in EN100 Ethernet module IEC 61850 variant (All versions < V4.30), EN100 Ethernet module DNP3 variant (All versions < V1.04), EN100 Ethernet module PROFINET IO variant (All versions), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module IEC 104 variant (All versions < V1.22). The web interface (TCP/80) of affected devices allows an unauthenticated user to upgrade or downgrade the firmware of the device, including to older versions with known vulnerabilities.

GitLab 7.10 through 12.8.1 has Incorrect Access Control. Under certain conditions where users should have been required to configure two-factor authentication, it was not being required.

An issue was discovered on Samsung mobile devices with Q(10.0) software. The DynamicLockscreen Terms and Conditions can be accepted without authentication. The Samsung ID is SVE-2020-17079 (October 2020).

A vulnerability has been identified in SICAM MMU (All versions < V2.05), SICAM SGU (All versions), SICAM T (All versions < V2.18). An attacker with access to the network could be able to install specially crafted firmware to the device.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to set an arbitrary authentication profile server via crafted HTTP requests.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to disable an authentication profile server via crafted HTTP requests.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to enable an authentication profile server via crafted HTTP requests.

The createComment mutation in the WPGraphQL 0.2.3 plugin for WordPress allows unauthenticated users to post comments on any article, even when 'allow comment' is disabled.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to disable front panel authentication via crafted HTTP requests.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to enable front panel authentication via crafted HTTP requests.

Barco Control Room Management Suite web application, which is part of TransForm N before 3.14, is exposing a license file upload mechanism. This upload can be executed without authentication.

Mautic allows you to update the application via an upgrade script. The upgrade logic isn't shielded off correctly, which may lead to vulnerable situation. This vulnerability is mitigated by the fact that Mautic needs to be installed in a certain way to be vulnerable.

An external config control vulnerability exists in the OAS Engine SecureAddSecurity functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted series of network requests can lead to the creation of a custom Security Group. An attacker can send a sequence of requests to trigger this vulnerability.

An authentication bypass vulnerability in the CRUDLab WP Like Button plugin through 1.6.0 for WordPress allows unauthenticated attackers to change settings. The contains() function in wp_like_button.php did not check if the current request is made by an authorized user, thus allowing any unauthenticated user to successfully update settings, as demonstrated by the wp-admin/admin.php?page=facebook-like-button each_page_url or code_snippet parameter.

An external config control vulnerability exists in the OAS Engine SecureAddUser functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted series of network requests can lead to the creation of an OAS user account. An attacker can send a sequence of requests to trigger this vulnerability.

Lexmark products through 2022-02-10 have Incorrect Access Control.

Online Store System v1.0 delete_product.php doesn't check to see if a user authtenticated or has administrative rights allowing arbitrary product deletion.

Missing authentication on ShenYu Admin when register by HTTP. This issue affected Apache ShenYu 2.4.0 and 2.4.1.

The /device/acceptBind end-point for Ourphoto App version 1.4.1 does not require authentication or authorization. The user_token header is not implemented or present on this end-point. An attacker can send a request to bind their account to any users picture frame, then send a POST request to accept their own bind request, without the end-users approval or interaction.

ClickStudios Passwordstate Password Reset Portal prior to build 8501 is affected by an authentication bypass vulnerability. The ResetPassword function does not validate whether the user has successfully authenticated using security questions. An unauthenticated, remote attacker can send a crafted HTTP request to the /account/ResetPassword page to set a new password for any registered user.

Asus RT-N12E 2.0.0.39 is affected by an incorrect access control vulnerability. Through system.asp / start_apply.htm, an attacker can change the administrator password without any authentication.

The includes/gateways/stripe/includes/admin/admin-actions.php in GiveWP plugin through 2.5.9 for WordPress allows unauthenticated settings change.

Honeywell Experion PKS Safety Manager through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0051, there is a Honeywell Experion PKS Safety Manager multiple proprietary protocols with unauthenticated functionality issue. The affected components are characterized as: Honeywell Experion TCP (51000/TCP), Safety Builder (51010/TCP). The potential impact is: Manipulate controller state, Manipulate controller configuration, Manipulate controller logic, Manipulate controller files, Manipulate IO. The Honeywell Experion PKS Distributed Control System (DCS) Safety Manager utilizes several proprietary protocols for a wide variety of functionality, including process data acquisition, controller steering and configuration management. These protocols include: Experion TCP (51000/TCP) and Safety Builder (51010/TCP). None of these protocols have any authentication features, allowing any attacker capable of communicating with the ports in question to invoke (a subset of) desired functionality. There is no authentication functionality on the protocols in question. An attacker capable of invoking the protocols' functionalities could achieve a wide range of adverse impacts, including (but not limited to), the following: for Experion TCP (51000/TCP): Issue IO manipulation commands, Issue file read/write commands; and for Safety Builder (51010/TCP): Issue controller start/stop commands, Issue logic download/upload commands, Issue file read commands, Issue system time change commands. A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

Lack of authentication in the network relays used in MEGVII Koala 2.9.1-c3s allows attackers to grant physical access to anyone by sending packet data to UDP port 5000.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /cnr requests.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /registerCpe requests.

Zoho ManageEngine ServiceDesk Plus before 11.1 build 11115 allows remote unauthenticated attackers to change the installation status of deployed agents.