Kirby is a content management system. A vulnerability in versions prior to 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6 affects all Kirby sites that might have potential attackers in the group of authenticated Panel users or that allow external visitors to update a Kirby content file (e.g. via a contact or comment form). Kirby sites are *not* affected if they don't allow write access for untrusted users or visitors. A field injection in a content storage implementation is a type of vulnerability that allows attackers with content write access to overwrite content fields that the site developer didn't intend to be modified. In a Kirby site this can be used to alter site content, break site behavior or inject malicious data or code. The exact security risk depends on the field type and usage. Kirby stores content of the site, of pages, files and users in text files by default. The text files use Kirby's KirbyData format where each field is separated by newlines and a line with four dashes (`----`). When reading a KirbyData file, the affected code first removed the Unicode BOM sequence from the file contents and afterwards split the content into fields by the field separator. When writing to a KirbyData file, field separators in field data are escaped to prevent user input from interfering with the field structure. However this escaping could be tricked by including a Unicode BOM sequence in a field separator (e.g. `--\xEF\xBB\xBF--`). When writing, this was not detected as a separator, but because the BOM was removed during reading, it could be abused by attackers to inject other field data into content files. Because each field can only be defined once per content file, this vulnerability only affects fields in the content file that were defined above the vulnerable user-writable field or not at all. Fields that are defined below the vulnerable field override the injected field content and were therefore already protected. The problem has been patched in Kirby 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6. In all of the mentioned releases, the maintainers have fixed the affected code to only remove the Unicode BOM sequence at the beginning of the file. This fixes this vulnerability both for newly written as well as for existing content files.

The ACL (Access Control List) of SAP Message Server - versions KERNEL 7.22, KERNEL 7.53, KERNEL 7.54, KERNEL 7.77, RNL64UC 7.22, RNL64UC 7.22EXT, RNL64UC 7.53, KRNL64NUC 7.22, KRNL64NUC 7.22EXT, can be bypassed in certain conditions, which may enable an authenticated malicious user to enter the network of the SAP systems served by the attacked SAP Message server. This may lead to unauthorized read and write of data as well as rendering the system unavailable.

Weak access control in Wing FTP Server (Admin Web Client) allows for privilege escalation.This issue affects Wing FTP Server: <= 7.2.0.

Version 3.3.23 of the Sassy Social Share WordPress plugin is vulnerable to PHP Object Injection via the wp_ajax_heateor_sss_import_config AJAX action due to deserialization of unvalidated user supplied inputs via the import_config function found in the ~/admin/class-sassy-social-share-admin.php file. This can be exploited by underprivileged authenticated users due to a missing capability check on the import_config function.

HashiCorp Terraform Enterprise releases up to v202106-1 did not properly perform authorization checks on a subset of API requests executed using the run token, allowing privilege escalation to organization owner. Fixed in v202107-1.

An issue was discovered in the FileImporter extension in MediaWiki through 1.36. For certain relaxed configurations of the $wgFileImporterRequiredRight variable, it might not validate all appropriate user rights, thus allowing a user with insufficient rights to perform operations (specifically file uploads) that they should not be allowed to perform.

In Rancher 2.x before 2.6.13 and 2.7.x before 2.7.4, an incorrectly applied authorization check allows users who have certain access to a namespace to move that namespace to a different project.

Systems running the Instaclustr fork of Stratio's Cassandra-Lucene-Index plugin versions 4.0-rc1-1.0.0 through 4.0.16-1.0.0 and 4.1.2-1.0.0 through 4.1.8-1.0.0, installed into Apache Cassandra version 4.x, are susceptible to a vulnerability which when successfully exploited could allow authenticated Cassandra users to remotely bypass RBAC and escalate their privileges.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to execute any wiki content with the right of the TipsPanel author by creating a tip UI extension. This has been patched in XWiki 15.1-rc-1 and 14.10.5.

MinIO is a Kubernetes native application for cloud storage. Prior to version `RELEASE.2021-12-27T07-23-18Z`, a malicious client can hand-craft an HTTP API call that allows for updating policy for a user and gaining higher privileges. The patch in version `RELEASE.2021-12-27T07-23-18Z` changes the accepted request body type and removes the ability to apply policy changes through this API. There is a workaround for this vulnerability: Changing passwords can be disabled by adding an explicit `Deny` rule to disable the API for users.

In Cloudera CDH before 5.7.1, Impala REVOKE ALL ON SERVER commands do not revoke all privileges.

Linear eMerge E3-Series devices allow Privilege Escalation.

XWiki Platform is a generic wiki platform. Starting in version 3.3-milestone-2 and prior to versions 14.10.4 and 15.0-rc-1, it's possible for a user to execute anything with the right of the author of the XWiki.ClassSheet document. This has been patched in XWiki 15.0-rc-1 and 14.10.4. There are no known workarounds.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V2.0). Due to insufficient checking of user permissions, an attacker may access URLs that require special authorization. An attacker must have access to a low privileged account in order to exploit the vulnerability.

Incorrect Authorization vulnerability in Mobatime web application allows Privilege Escalation, Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Mobatime web application: through 06.7.22.

A vulnerability was discovered in vdsm, version 4.19 through 4.30.3 and 4.30.5 through 4.30.8. The systemd_run function exposed to the vdsm system user could be abused to execute arbitrary commands as root.

The Formidable Forms WordPress plugin before 6.3.1 does not adequately authorize the user or validate the plugin URL in its functionality for installing add-ons. This allows a user with a role as low as Subscriber to install and activate arbitrary plugins of arbitrary versions from the WordPress.org plugin repository onto the site, leading to Remote Code Execution.

A hidden API exists in TapHome's core platform before version 2023.2 that allows an authenticated, low privileged user to change passwords of other users without any prior knowledge. The attacker may gain full access to the device by using this vulnerability.

xCAT is a toolkit for deployment and administration of computer clusters. In versions prior to 2.16.5 if zones are configured as a mechanism to secure clusters in XCAT, it is possible for a local root user from one node to obtain credentials to SSH to any node in any zone, except the management node of the default zone. XCAT zones are not enabled by default. Only users that use the optional zone feature are impacted. All versions of xCAT prior to xCAT 2.16.5 are vulnerable. This problem has been fixed in xCAT 2.16.5. Users making use of zones should upgrade to 2.16.5. Users unable to upgrade may mitigate the issue by disabling zones or patching the management node with the fix contained in commit `85149c37f49`.

REDDOXX MailDepot 2032 2.2.1242 allows authenticated users to access the mailboxes of other users.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 could allow an authenticated user to perform actions that they should not have access to due to improper authorization. IBM X-Force ID: 247630.

An issue was discovered in GitLab CE/EE affecting all versions starting from 16.0 prior to 17.3.7, starting from 17.4 prior to 17.4.4, and starting from 17.5 prior to 17.5.2, which could have allowed unauthorized access to the Kubernetes agent in a cluster under specific configurations.

A vulnerability in the web-based management interface of ClearPass Policy Manager allows an attacker with read-only privileges to perform actions that change the state of the ClearPass Policy Manager instance. Successful exploitation of this vulnerability allows an attacker to complete state-changing actions in the web-based management interface that should not be allowed by their current level of authorization on the platform.

A CWE-863: Incorrect Authorization vulnerability exists that could allow remote code execution on upload and install packages when a hacker is using a low privileged user account. Affected products: StruxureWare Data Center Expert (V7.9.2 and prior)

A sandbox bypass vulnerability in Jenkins Script Security Plugin 1.67 and earlier related to the handling of default parameter expressions in closures allowed attackers to execute arbitrary code in sandboxed scripts.

A vulnerability in the vManage web-based UI (Web UI) of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected vManage device. The vulnerability is due to a failure to properly authorize certain user actions in the device configuration. An attacker could exploit this vulnerability by logging in to the vManage Web UI and sending crafted HTTP requests to vManage. A successful exploit could allow attackers to gain elevated privileges and make changes to the configuration that they would not normally be authorized to make.

On affected platforms running Arista EOS, an authorized attacker with permissions to perform gNMI requests could craft a request allowing it to update arbitrary configurations in the switch. This situation occurs only when the Streaming Telemetry Agent (referred to as the TerminAttr agent) is enabled and gNMI access is configured on the agent. Note: This gNMI over the Streaming Telemetry Agent scenario is mostly commonly used when streaming to a 3rd party system and is not used by default when streaming to CloudVision

gomatrixserverlib is a Go library for matrix protocol federation. Dendrite is a Matrix homeserver written in Go, an alternative to Synapse. The power level parsing within gomatrixserverlib was failing to parse the `"events_default"` key of the `m.room.power_levels` event, defaulting the event default power level to zero in all cases. Power levels are the matrix terminology for user access level. In rooms where the `"events_default"` power level had been changed, this could result in events either being incorrectly authorised or rejected by Dendrite servers. gomatrixserverlib contains a fix as of commit `723fd49` and Dendrite 0.9.3 has been updated accordingly. Matrix rooms where the `"events_default"` power level has not been changed from the default of zero are not vulnerable. Users are advised to upgrade. There are no known workarounds for this issue.

A flaw was found in Wildfly Security Manager, running under JDK 11 or 8, that authorized requests for any requester. This flaw could be used by a malicious app deployed on the app server to access unauthorized information and possibly conduct further attacks. Versions shipped with Red Hat Jboss EAP 7 and Red Hat SSO 7 are vulnerable to this issue.

A vulnerability in the IOx application environment for Cisco IOS Software could allow an authenticated, remote attacker to gain unauthorized access to the Guest Operating System (Guest OS) running on an affected device. The vulnerability is due to incorrect role-based access control (RBAC) evaluation when a low-privileged user requests access to a Guest OS that should be restricted to administrative accounts. An attacker could exploit this vulnerability by authenticating to the Guest OS by using the low-privileged-user credentials. An exploit could allow the attacker to gain unauthorized access to the Guest OS as a root user.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, a hidden action=9 feature in filemanager2.php allows attackers to execute a shell command, i.e., obtain a reverse shell with user privilege.

Transaction Management in SAP Treasury and Risk Management (corrected in S4CORE versions 1.01, 1.02, 1.03, 1.04 and EA-FINSERV versions 6.0, 6.03, 6.04, 6.05, 6.06, 6.16, 6.17, 6.18, 8.0) does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges.

Transaction Management in SAP Treasury and Risk Management (corrected in S4CORE versions 1.01, 1.02, 1.03, 1.04 and EA-FINSERV versions 6.0, 6.03, 6.04, 6.05, 6.06, 6.16, 6.17, 6.18, 8.0) does not perform necessary authorization checks for functionalities that require user identity.

obs-server before 1.7.7 allows logins by 'unconfirmed' accounts due to a bug in the REST api implementation.

This vulnerability exists due to improper access controls on APIs in the Authentication module of Symphony XTS Web Trading and Mobile Trading platforms (version 2.0.0.1_P160). An authenticated remote attacker could exploit this vulnerability by manipulating parameters through HTTP request which could lead to unauthorized account take over belonging to other users.

Capsule is a multi-tenancy and policy-based framework for Kubernetes. In Capsule v0.7.0 and earlier, the tenant-owner can patch any arbitrary namespace that has not been taken over by a tenant (i.e., namespaces without the ownerReference field), thereby gaining control of that namespace. Version 0.7.1 contains a patch.

Evmos is a decentralized Ethereum Virtual Machine chain on the Cosmos Network. Prior to version 19.0.0, a user can create a vesting account with a 3rd party account (EOA or contract) as funder. Then, this user can create an authorization for the contract.CallerAddress, this is the authorization checked in the code. But the funds are taken from the funder address provided in the message. Consequently, the user can fund a vesting account with a 3rd party account without its permission. The funder address can be any address, so this vulnerability can be used to drain all the accounts in the chain. The issue has been patched in version 19.0.0.

authentik is an open-source Identity Provider that emphasizes flexibility and versatility. Authentik API-Access-Token mechanism can be exploited to gain admin user privileges. A successful exploit of the issue will result in a user gaining full admin access to the Authentik application, including resetting user passwords and more. This issue has been patched in version(s) 2024.2.4, 2024.4.2 and 2024.6.0.

The workflow component in Liferay Portal 7.3.2 through 7.4.3.111, and Liferay DXP 2023.Q4.0 through 2023.Q4.5, 2023.Q3.1 through 2023.Q3.8, 7.4 GA through update 92 and 7.3 GA through update 36 does not properly check user permissions before updating a workflow definition, which allows remote authenticated users to modify workflow definitions and execute arbitrary code (RCE) via the headless API.

AdTran SRG 834-5 HDC17600021F1 devices (with SmartOS 11.1.1.1 and fixed in Version 12.1.3.1) have SSH enabled by default, accessible both over the LAN and the Internet. During a window of time when the device is being set up, it uses a default username and password combination of admin/admin with root-level privileges. An attacker can exploit this window to gain unauthorized root access by either modifying the existing admin account or creating a new account with equivalent privileges. This vulnerability allows attackers to execute arbitrary commands. NOTE: The vendor has disputed this, finding the report not applicable. According to AdTran, SSH has never been accessible (from WAN) on SmartOS official builds. Furthermore, the vendor adds that test build 11.1.0.101-202106231430 was never released to end users.

An issue in the WaterToken smart contract (which can be run on the Ethereum blockchain) allows remote attackers to have an unspecified impact. NOTE: this is disputed by third parties because the impact is limited to function calls.

Rockwell Automation FactoryTalk Services Platform v6.11 and earlier, if FactoryTalk Security is enabled and deployed contains a vulnerability that may allow a remote, authenticated attacker to bypass FactoryTalk Security policies based on the computer name. If successfully exploited, this may allow an attacker to have the same privileges as if they were logged on to the client machine.

Incorrect Authorization vulnerability in WPChill Htaccess File Editor allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Htaccess File Editor: from n/a through 1.0.18.

The AutomatorWP WordPress plugin before 1.7.6 does not perform capability checks which allows users with Subscriber roles to enumerate automations, disclose title of private posts or user emails, call functions, or perform privilege escalation via Ajax actions.

A vulnerability in Cisco Connected Mobile Experiences (CMX) could allow a remote, authenticated attacker without administrative privileges to alter the password of any user on an affected system. The vulnerability is due to incorrect handling of authorization checks for changing a password. An authenticated attacker without administrative privileges could exploit this vulnerability by sending a modified HTTP request to an affected device. A successful exploit could allow the attacker to alter the passwords of any user on the system, including an administrative user, and then impersonate that user.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization, enabling them to access sensitive information, modify the system configuration, or impact the availability of the affected system. The vulnerability is due to insufficient authorization checking on the affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. The attacker may be able to access sensitive information, modify the system configuration, or impact the availability of the affected system.