Insufficient policy enforcement in Blink in Google Chrome prior to 83.0.4103.61 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page.

A vulnerability in the TLS handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 1000 Series firewalls could allow an unauthenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper implementation of countermeasures against the Bleichenbacher attack for cipher suites that rely on RSA for key exchange. An attacker could exploit this vulnerability by sending crafted TLS messages to the device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device. To exploit this vulnerability, an attacker must be able to perform both of the following actions: Capture TLS traffic that is in transit between clients and the affected device Actively establish a considerable number of TLS connections to the affected device

A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.

During boot, the device unlock interface behaves differently depending on if a fingerprint registered to the device is present. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-79776455

The implementations of SAE in hostapd and wpa_supplicant are vulnerable to side channel attacks as a result of observable timing differences and cache access patterns. An attacker may be able to gain leaked information from a side channel attack that can be used for full password recovery. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected.

Jenkins Tuleap Authentication Plugin 1.1.20 and earlier uses a non-constant time comparison function when validating an authentication token allowing attackers to use statistical methods to obtain a valid authentication token.

The implementations of EAP-PWD in hostapd and wpa_supplicant are vulnerable to side-channel attacks as a result of cache access patterns. All versions of hostapd and wpa_supplicant with EAP-PWD support are vulnerable. The ability to install and execute applications is necessary for a successful attack. Memory access patterns are visible in a shared cache. Weak passwords may be cracked. Versions of hostapd/wpa_supplicant 2.7 and newer, are not vulnerable to the timing attack described in CVE-2019-9494. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.

RSA BSAFE Crypto-J versions prior to 6.2.5 are vulnerable to Information Exposure Through Timing Discrepancy vulnerabilities during ECDSA key generation. A malicious remote attacker could potentially exploit those vulnerabilities to recover ECDSA keys.

RSA BSAFE Crypto-J versions prior to 6.2.5 are vulnerable to an Information Exposure Through Timing Discrepancy vulnerabilities during DSA key generation. A malicious remote attacker could potentially exploit those vulnerabilities to recover DSA keys.

There's a possible information leak / session hijack vulnerability in Rack (RubyGem rack). This vulnerability is patched in versions 1.6.12 and 2.0.8. Attackers may be able to find and hijack sessions by using timing attacks targeting the session id. Session ids are usually stored and indexed in a database that uses some kind of scheme for speeding up lookups of that session id. By carefully measuring the amount of time it takes to look up a session, an attacker may be able to find a valid session id and hijack the session. The session id itself may be generated randomly, but the way the session is indexed by the backing store does not use a secure comparison.

In situations where an attacker receives automated notification of the success or failure of a decryption attempt an attacker, after sending a very large number of messages to be decrypted, can recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).

STMicroelectronics ST33TPHF2ESPI TPM devices before 2019-09-12 allow attackers to extract the ECDSA private key via a side-channel timing attack because ECDSA scalar multiplication is mishandled, aka TPM-FAIL.

If an application encounters a fatal protocol error and then calls SSL_shutdown() twice (once to send a close_notify, and once to receive one) then OpenSSL can respond differently to the calling application if a 0 byte record is received with invalid padding compared to if a 0 byte record is received with an invalid MAC. If the application then behaves differently based on that in a way that is detectable to the remote peer, then this amounts to a padding oracle that could be used to decrypt data. In order for this to be exploitable "non-stitched" ciphersuites must be in use. Stitched ciphersuites are optimised implementations of certain commonly used ciphersuites. Also the application must call SSL_shutdown() twice even if a protocol error has occurred (applications should not do this but some do anyway). Fixed in OpenSSL 1.0.2r (Affected 1.0.2-1.0.2q).

gost (GO Simple Tunnel) is a simple tunnel written in golang. Sensitive secrets such as passwords, token and API keys should be compared only using a constant-time comparison function. Untrusted input, sourced from a HTTP header, is compared directly with a secret. Since this comparison is not secure, an attacker can mount a side-channel timing attack to guess the password. As a workaround, this can be easily fixed using a constant time comparing function such as `crypto/subtle`'s `ConstantTimeCompare`.

MatrixSSL 4.2.1 and earlier contains a timing side channel in ECDSA signature generation. This allows a local or a remote attacker, able to measure the duration of hundreds to thousands of signing operations, to compute the private key used. The issue occurs because crypto/pubkey/ecc_math.c scalar multiplication leaks the bit length of the scalar.

The implementations of SAE and EAP-pwd in hostapd and wpa_supplicant 2.x through 2.8 are vulnerable to side-channel attacks as a result of observable timing differences and cache access patterns when Brainpool curves are used. An attacker may be able to gain leaked information from a side-channel attack that can be used for full password recovery.

Information leak in storage in Google Chrome prior to 77.0.3865.75 allowed a remote attacker to leak cross-origin data via a crafted HTML page.

Search Guard versions before 21.0 had an timing side channel issue when using the internal user database.

Tor Browser before 8.0.1 has an information exposure vulnerability. It allows remote attackers to detect the browser's UI locale by measuring a button width, even if the user has a "Don't send my language" setting.

mudler/localai version 2.17.1 is vulnerable to a Timing Attack. This type of side-channel attack allows an attacker to compromise the cryptosystem by analyzing the time taken to execute cryptographic algorithms. Specifically, in the context of password handling, an attacker can determine valid login credentials based on the server's response time, potentially leading to unauthorized access.

Navigation events were not fully adhering to the W3C's "Navigation-Timing Level 2" draft specification in some instances for the unload event, which restricts access to detailed timing attributes to only be same-origin. This resulted in potential cross-origin information exposure of history through timing side-channel attacks. This vulnerability affects Firefox < 69, Thunderbird < 68.1, Thunderbird < 60.9, Firefox ESR < 60.9, and Firefox ESR < 68.1.

auth.c in dhcpcd before 7.2.1 allowed attackers to infer secrets by performing latency attacks.

A plaintext recovery of encrypted messages or a Man-in-the-middle (MiTM) attack on RSA PKCS #1 v1.5 encryption may be possible without knowledge of the server's private key. Fortinet FortiOS 5.4.6 to 5.4.9, 6.0.0 and 6.0.1 are vulnerable by such attack under VIP SSL feature when CPx being used.

A plaintext recovery of encrypted messages or a Man-in-the-middle (MiTM) attack on RSA PKCS #1 v1.5 encryption may be possible without knowledge of the server's private key. Fortinet FortiOS 5.4.6 to 5.4.9, 6.0.0 and 6.0.1 are vulnerable by such attack under SSL Deep Inspection feature when CPx being used.

Sinatra rack-protection versions 1.5.4 and 2.0.0.rc3 and earlier contains a timing attack vulnerability in the CSRF token checking that can result in signatures can be exposed. This attack appear to be exploitable via network connectivity to the ruby application. This vulnerability appears to have been fixed in 1.5.5 and 2.0.0.

A vulnerability was found in OpenShift OSIN. It has been classified as problematic. This affects the function ClientSecretMatches/CheckClientSecret. The manipulation of the argument secret leads to observable timing discrepancy. The name of the patch is 8612686d6dda34ae9ef6b5a974e4b7accb4fea29. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-216987.

Inappropriate implementation in cache in Google Chrome prior to 96.0.4664.45 allowed a remote attacker to leak cross-origin data via a crafted HTML page.

On BIG-IP versions 11.6.0-11.6.2 (fixed in 11.6.2 HF1), 12.0.0-12.1.2 HF1 (fixed in 12.1.2 HF2), or 13.0.0-13.0.0 HF2 (fixed in 13.0.0 HF3) a virtual server configured with a Client SSL profile may be vulnerable to an Adaptive Chosen Ciphertext attack (AKA Bleichenbacher attack) against RSA, which when exploited, may result in plaintext recovery of encrypted messages and/or a Man-in-the-middle (MiTM) attack, despite the attacker not having gained access to the server's private key itself, aka a ROBOT attack.

Symantec IntelligenceCenter 3.3 is vulnerable to the Return of the Bleichenbacher Oracle Threat (ROBOT) attack. A remote attacker, who has captured a pre-recorded SSL session inspected by SSLV, can establish large numbers of crafted SSL connections to the target and obtain the session keys required to decrypt the pre-recorded SSL session.

Radware Alteon devices with a firmware version between 31.0.0.0-31.0.3.0 are vulnerable to an adaptive-chosen ciphertext attack ("Bleichenbacher attack"). This allows an attacker to decrypt observed traffic that has been encrypted with the RSA cipher and to perform other private key operations.

jose is an npm library providing a number of cryptographic operations. In vulnerable versions AES_CBC_HMAC_SHA2 Algorithm (A128CBC-HS256, A192CBC-HS384, A256CBC-HS512) decryption would always execute both HMAC tag verification and CBC decryption, if either failed `JWEDecryptionFailed` would be thrown. A possibly observable difference in timing when padding error would occur while decrypting the ciphertext makes a padding oracle and an adversary might be able to make use of that oracle to decrypt data without knowing the decryption key by issuing on average 128*b calls to the padding oracle (where b is the number of bytes in the ciphertext block). All major release versions have had a patch released which ensures the HMAC tag is verified before performing CBC decryption. The fixed versions are `^1.28.1 || ^2.0.5 || >=3.11.4`. Users should upgrade their v1.x dependency to ^1.28.1, their v2.x dependency to ^2.0.5, and their v3.x dependency to ^3.11.4. Thanks to Jason from Microsoft Vulnerability Research (MSVR) for bringing this up and Eva Sarafianou (@esarafianou) for helping to score this advisory.

Symantec SSL Visibility (SSLV) 3.8.4FC, 3.10 prior to 3.10.4.1, 3.11, and 3.12 prior to 3.12.2.1 are vulnerable to the Return of the Bleichenbacher Oracle Threat (ROBOT) attack. All affected SSLV versions act as weak oracles according the oracle classification used in the ROBOT research paper. A remote attacker, who has captured a pre-recorded SSL session inspected by SSLV, can establish multiple millions of crafted SSL connections to the target and obtain the session keys required to decrypt the pre-recorded SSL session.

jose-browser-runtime is an npm package which provides a number of cryptographic functions. In versions prior to 3.11.4 the AES_CBC_HMAC_SHA2 Algorithm (A128CBC-HS256, A192CBC-HS384, A256CBC-HS512) decryption would always execute both HMAC tag verification and CBC decryption, if either failed `JWEDecryptionFailed` would be thrown. But a possibly observable difference in timing when padding error would occur while decrypting the ciphertext makes a padding oracle and an adversary might be able to make use of that oracle to decrypt data without knowing the decryption key by issuing on average 128*b calls to the padding oracle (where b is the number of bytes in the ciphertext block). A patch was released which ensures the HMAC tag is verified before performing CBC decryption. The fixed versions are `>=3.11.4`. Users should upgrade to `^3.11.4`.

Botan before 3.6.0, when certain GCC versions are used, has a compiler-induced secret-dependent operation in lib/utils/donna128.h in donna128 (used in Chacha-Poly1305 and x25519). An addition can be skipped if a carry is not set. This was observed for GCC 11.3.0 with -O2 on MIPS, and GCC on x86-i386. (Only 32-bit processors can be affected.)

Botan before 3.6.0, when certain LLVM versions are used, has compiler-induced secret-dependent control flow in lib/utils/ghash/ghash.cpp in GHASH in AES-GCM. There is a branch instead of an XOR with carry. This was observed for Clang in LLVM 15 on RISC-V.

The aaugustin websockets library before 9.1 for Python has an Observable Timing Discrepancy on servers when HTTP Basic Authentication is enabled with basic_auth_protocol_factory(credentials=...). An attacker may be able to guess a password via a timing attack.

jose-node-cjs-runtime is an npm package which provides a number of cryptographic functions. In versions prior to 3.11.4 the AES_CBC_HMAC_SHA2 Algorithm (A128CBC-HS256, A192CBC-HS384, A256CBC-HS512) decryption would always execute both HMAC tag verification and CBC decryption, if either failed `JWEDecryptionFailed` would be thrown. But a possibly observable difference in timing when padding error would occur while decrypting the ciphertext makes a padding oracle and an adversary might be able to make use of that oracle to decrypt data without knowing the decryption key by issuing on average 128*b calls to the padding oracle (where b is the number of bytes in the ciphertext block). A patch was released which ensures the HMAC tag is verified before performing CBC decryption. The fixed versions are `>=3.11.4`. Users should upgrade to `^3.11.4`.

A username enumeration issue was discovered in SquaredUp before version 4.6.0. The login functionality was implemented in a way that would enable a malicious user to guess valid username due to a different response time from invalid usernames.

In versions 13.0.0-13.0.0 HF2, 12.1.0-12.1.2 HF1, and 11.6.1-11.6.2, BIG-IP platforms with Cavium Nitrox SSL hardware acceleration cards, a Virtual Server configured with a Client SSL profile, and using Anonymous (ADH) or Ephemeral (DHE) Diffie-Hellman key exchange and Single DH use option not enabled in the options list may be vulnerable to crafted SSL/TLS Handshakes that may result with a PMS (Pre-Master Secret) that starts in a 0 byte and may lead to a recovery of plaintext messages as BIG-IP TLS/SSL ADH/DHE sends different error messages acting as an oracle. Similar error messages when PMS starts with 0 byte coupled with very precise timing measurement observation may also expose this vulnerability.

The openssl_private_decrypt function in PHP, when using PKCS1 padding (OPENSSL_PKCS1_PADDING, which is the default), is vulnerable to the Marvin Attack unless it is used with an OpenSSL version that includes the changes from this pull request: https://github.com/openssl/openssl/pull/13817 (rsa_pkcs1_implicit_rejection). These changes are part of OpenSSL 3.2 and have also been backported to stable versions of various Linux distributions, as well as to the PHP builds provided for Windows since the previous release. All distributors and builders should ensure that this version is used to prevent PHP from being vulnerable. PHP Windows builds for the versions 8.1.29, 8.2.20 and 8.3.8 and above include OpenSSL patches that fix the vulnerability.