A user enumeration vulnerability in MELAG FTP Server 2.2.0.4 allows an attacker to identify valid FTP usernames.

ECDSA/EC/Point.pm in Crypt::Perl before 0.33 does not properly consider timing attacks against the EC point multiplication algorithm.

A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i801, RUGGEDCOM i802, RUGGEDCOM i803, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM RMC30, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RP110, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600T, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS401, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000H, RUGGEDCOM RS8000T, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900L, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS969, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSL910, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. A timing attack, in a third-party component, could make the retrieval of the private key possible, used for encryption of sensitive data. If a threat actor were to exploit this, the data integrity and security could be compromised.

A user enumeration vulnerability flaw was found in Venki Supravizio BPM 10.1.2. This issue occurs during password recovery, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

An issue was discovered in eZ Publish Ibexa Kernel before 7.5.15.1. The /user/sessions endpoint can be abused to determine account existence.

Kanboard is project management software that focuses on the Kanban methodology. Prior to version 1.2.46, Kanboard is vulnerable to username enumeration and IP spoofing-based brute-force protection bypass. By analyzing login behavior and abusing trusted HTTP headers, an attacker can determine valid usernames and circumvent rate-limiting or blocking mechanisms. Any organization running a publicly accessible Kanboard instance is affected, especially if relying on IP-based protections like Fail2Ban or CAPTCHA for login rate-limiting. Attackers with access to the login page can exploit this flaw to enumerate valid usernames and bypass IP-based blocking mechanisms, putting all user accounts at higher risk of brute-force or credential stuffing attacks. Version 1.2.46 contains a patch for the issue.

Citrix XenApp 6.5, when 2FA is enabled, allows a remote unauthenticated attacker to ascertain whether a user exists on the server, because the 2FA error page only occurs after a valid username is entered. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue was discovered in Aviatrix Controller before 5.4.1204. There is a Observable Response Discrepancy from the API, which makes it easier to perform user enumeration via brute force.

Best Practical Request Tracker (RT) 4.2 before 4.2.17, 4.4 before 4.4.5, and 5.0 before 5.0.2 allows sensitive information disclosure via a timing attack against lib/RT/REST2/Middleware/Auth.pm.

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to determine whether a subscriber username is valid. The vulnerability occurs because the Cisco Policy Suite RADIUS server component returns different authentication failure messages based on the validity of usernames. An attacker could use these messages to determine whether a valid subscriber username has been identified. The attacker could use this information in subsequent attacks against the system. Cisco Bug IDs: CSCvg47830.

Thinfinity VirtualUI before 3.0 allows a malicious actor to enumerate users registered in the OS (Windows) through the /changePassword URI. By accessing the vector, an attacker can determine if a username exists thanks to the message returned; it can be presented in different languages according to the configuration of VirtualUI. Common users are administrator, admin, guest and krgtbt.

CMAC verification functionality in Microchip Atmel ATSAMA5 products is vulnerable to vulnerable to timing and power analysis attacks.

Jetty through 9.4.x is prone to a timing channel in util/security/Password.java, which makes it easier for remote attackers to obtain access by observing elapsed times before rejection of incorrect passwords.

The private-key operations in ecc.c in wolfSSL before 4.4.0 do not use a constant-time modular inverse when mapping to affine coordinates, aka a "projective coordinates leak."

IBM Guardium Data Encryption (GDE) 5.0.0.2 behaves differently or sends different responses under different circumstances in a way that is observable to an unauthorized actor, which could facilitate username enumeration. IBM X-Force ID: 213856.

A vulnerability has been identified in Mendix Forgot Password (Mendix 10 compatible) (All versions < V5.4.0), Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.3), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.3), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.4.0). Applications using the affected module are vulnerable to user enumeration due to distinguishable responses. This could allow an unauthenticated remote attacker to determine if a user is valid or not, enabling a brute force attack with valid users.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

The commit 3730880 (April 2023) and v.0.9-beta1 of gugoan Economizzer has a user enumeration vulnerability in the login and forgot password functionalities. The app reacts differently when a user or email address is valid, and when it's not. This may allow an attacker to determine whether a user or email address is valid, or brute force valid usernames and email addresses.

Username enumeration is possible through Bypassing CAPTCHA in On-premise SureMDM Solution on Windows deployment allows attacker to enumerate local user information via error message. This issue affects SureMDM On-premise: 6.31 and below version

goauthentik is an open-source Identity Provider. In affected versions using a recovery flow with an identification stage an attacker is able to determine if a username exists. Only setups configured with a recovery flow are impacted by this. Anyone with a user account on a system with the recovery flow described above is susceptible to having their username/email revealed as existing. An attacker can easily enumerate and check users' existence using the recovery flow, as a clear message is shown when a user doesn't exist. Depending on configuration this can either be done by username, email, or both. This issue has been addressed in versions 2023.5.6 and 2023.6.2. Users are advised to upgrade. There are no known workarounds for this issue.

IBM Aspera Faspex 5.0.0 through 5.0.10 could disclose sensitive username information due to an observable response discrepancy.

The login functionality of the web server in affected devices does not normalize the response times of login attempts. An unauthenticated remote attacker could exploit this side-channel information to distinguish between valid and invalid usernames.

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.

An issue was discovered in eGroupWare 17.1.20190111. A User Enumeration vulnerability exists under calendar/freebusy.php, which allows unauthenticated remote attackers to enumerate the users of web applications based on server response.

IBM CICS TX Advanced 10.1 could disclose sensitive information to a remote attacker due to observable discrepancy in HTTP responses. IBM X-Force ID: 260814.

An issue was discovered in the ProofreadPage (aka Proofread Page) extension for MediaWiki through 1.39.3. In includes/Page/PageContentHandler.php and includes/Page/PageDisplayHandler.php, hidden users can be exposed via public interfaces.

Tadiran Telecom Aeonix - CWE-204: Observable Response Discrepancy

HashiCorp's Vault and Vault Enterprise are vulnerable to user enumeration when using the LDAP auth method. An attacker may submit requests of existent and non-existent LDAP users and observe the response from Vault to check if the account is valid on the LDAP server. This vulnerability is fixed in Vault 1.14.1 and 1.13.5.

Observable Response Discrepancy in the SICK ICR890-4 could allow a remote attacker to identify valid usernames for the FTP server from the response given during a failed login attempt.

A vulnerability classified as problematic has been found in Rotem Dynamics Rotem CRM up to 20230729. This affects an unknown part of the file /LandingPages/api/otp/send?id=[ID][ampersand]method=sms of the component OTP URI Interface. The manipulation leads to information exposure through discrepancy. It is possible to initiate the attack remotely. The identifier VDB-233253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

emoncms v11 and later was discovered to contain an information disclosure vulnerability which allows attackers to obtain the web directory path and other information leaked by the server via a crafted web request.

Meow hash 0.5/calico does not sufficiently thwart key recovery by an attacker who can query whether there's a collision in the bottom bits of the hashes of two messages, as demonstrated by an attack against a long-running web service that allows the attacker to infer collisions by measuring timing differences.

TN-5900 Series version 3.3 and prior versions is vulnearble to user enumeration vulnerability. The vulnerability may allow a remote attacker to determine whether a user is valid during password recovery through the web login page and enable a brute force attack with valid users.

AMI BMC contains a vulnerability in the IPMI handler, where an unauthorized attacker can use certain oracles to guess a valid username, which may lead to information disclosure.

User enumeration vulnerability in Password Recovery plugin 1.2 version for Roundcube, which could allow a remote attacker to create a test script against the password recovery function to enumerate all users in the database.

wolfSSL 4.3.0 has mulmod code in wc_ecc_mulmod_ex in ecc.c that does not properly resist timing side-channel attacks.

Avaya IX Workforce Engagement v15.2.7.1195 - User Enumeration - Observable Response Discrepancy

A username enumeration issue was discovered in Medicine Tracker System 1.0. The login functionality allows a malicious user to guess a valid username due to a different response time from invalid usernames. When one enters a valid username, the response time increases depending on the length of the supplied password.

When supplied with a random MAC address, Snap One OvrC cloud servers will return information about the device. The MAC address of devices can be enumerated in an attack and the OvrC cloud will disclose their information.

The HCL Domino AppDev Pack IAM service is susceptible to a User Account Enumeration vulnerability.   During a failed login attempt a difference in messages could allow an attacker to determine if the user is valid or not.  The attacker could use this information to focus a brute force attack on valid users.

A vulnerability has been identified in Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.1), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.1), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.1.1). The affected versions of the module contain an observable response discrepancy issue that could allow an attacker to retrieve sensitive information.

IBM Aspera Orchestrator 4.0.1 could allow a remote attacker to enumerate usernames due to observable response discrepancies. IBM X-Force ID: 248545.

Observable Timing Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

OpenSearch Security is a plugin for OpenSearch that offers encryption, authentication and authorization. There is an observable discrepancy in the authentication response time between calls where the user provided exists and calls where it does not. This issue only affects calls using the internal basic identity provider (IdP), and not other externally configured IdPs. Patches were released in versions 1.3.9 and 2.6.0, there are no workarounds.

common/password.c in Pengutronix barebox through 2021.07.0 leaks timing information because strncmp is used during hash comparison.

Observable Response Discrepancy in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a remote attacker to gain information about valid usernames by analyzing challenge responses from the server via the REST interface.

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

ProFTPD 1.2.x, including 1.2.8 and 1.2.10, responds in a different amount of time when a given username exists, which allows remote attackers to identify valid usernames by timing the server response.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 authentication process response indicates and validates the existence of a username. This may allow an attacker to enumerate different user accounts.