NVClient 5.0 contains a stack buffer overflow vulnerability in the user configuration contact field that allows attackers to crash the application. Attackers can overwrite 846 bytes of memory by pasting a crafted payload into the contact box, causing a denial of service condition.

HP Universal Print Driver is potentially vulnerable to denial of service due to buffer overflow in versions of UPD 7.4 or older (e.g., v7.3.x, v7.2.x, v7.1.x, etc.).

The IEC870IP driver for AVEVA’s Vijeo Citect and Citect SCADA and Schneider Electric’s Power SCADA Operation has a buffer overflow vulnerability that could result in a server-side crash.

Those using Woodstox to parse XML data may be vulnerable to Denial of Service attacks (DOS) if DTD support is enabled. If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

Tenda W30E V16.01.0.19 (5037) was discovered to contain a stack overflow in the countryCode parameter in the werlessAdvancedSet function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the delDhcpIndex parameter in the formDelDhcpRule function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the portMappingIndex parameter in the formDelPortMapping function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

A vulnerability was found in quickjs-ng QuickJS up to 0.8.0. It has been declared as problematic. Affected by this vulnerability is the function JS_GetRuntime of the file quickjs.c of the component qjs. The manipulation leads to stack-based buffer overflow. The attack can be launched remotely. Upgrading to version 0.9.0 is able to address this issue. The patch is named 99c02eb45170775a9a679c32b45dd4000ea67aff. It is recommended to upgrade the affected component.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the bindDhcpIndex parameter in the modifyDhcpRule function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain multiple stack overflows in the formSetDebugCfg function via the pEnable, pLevel, and pModule parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the vpnUsers parameter in the formAddVpnUsers function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the gstUp parameter in the guestWifiRuleRefresh function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

NDrive(1.2.2).sys in Naver Cloud Explorer has a stack-based buffer overflow, which allows attackers to cause a denial of service when reading data from IOCTL handle.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain multiple stack overflows in the formIPMacBindModify function via the ruleId, ip, mac, v6 and remark parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the pPppUser parameter in the getsinglepppuser function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the pppoeServerWhiteMacIndex parameter in the formModifyPppAuthWhiteMac function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda W30E V16.01.0.19 (5037) was discovered to contain a stack overflow in the String parameter in the formDeleteMeshNode function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the staticRouteGateway parameter in the formSetStaticRoute function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the listStr parameter in the ipMacBindListStore function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

An attacker could send crafted SMTP packets to cause a denial-of-service condition where the controller enters a major non-recoverable faulted state (MNRF) in CompactLogix 5370 L1, L2, and L3 Controllers, Compact GuardLogix 5370 controllers, and Armor Compact GuardLogix 5370 Controllers Versions 20 - 30 and earlier.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the dhcpIndex parameter in the addDhcpRule function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the rules parameter in the dns_forward_rule_store function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request.

A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Tenda AC15 v15.03.05.19_multi_TD01 has a stack overflow via the list parameter in the fromSetIpMacBind function.

Tenda AC6 V15.03.06.23_multi is vulnerable to Buffer Overflow in the formSetCfm function.

Those using Xstream to seralize XML data may be vulnerable to Denial of Service attacks (DOS). If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

Tenda AC6 V15.03.06.23_multi is vulnerable to Buffer Overflow in the function formSetMacFilterCfg via the parameters macFilterType and deviceList.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer Overflow in the URI parser of CivetWeb 1.14 through 1.16 (latest) allows a remote attacker to achieve remote code execution via a crafted HTTP request. This vulnerability is triggered during request processing and may allow an attacker to corrupt heap memory, potentially leading to denial of service or arbitrary code execution.

Tenda AC8 v16.03.34.06 is vulnerable to Buffer Overflow in the formWifiBasicSet function via the parameter security or security_5g.

Tenda AC6 V15.03.06.23_multi was discovered to contain a buffer overflow via the time parameter in the fromSetSysTime function.

A Stack-based Buffer Overflow issue was discovered in Emerson Process Management ControlWave Micro Process Automation Controller: ControlWave Micro [ProConOS v.4.01.280] firmware: CWM v.05.78.00 and prior. A stack-based buffer overflow vulnerability caused by sending crafted packets on Port 20547 could force the PLC to change its state into halt mode.

Those using Jettison to parse untrusted XML or JSON data may be vulnerable to Denial of Service attacks (DOS). If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

MaterialX is an open standard for the exchange of rich material and look-development content across applications and renderers. In versions 1.39.2 and below, when parsing an MTLX file with multiple nested nodegraph implementations, the MaterialX XML parsing logic can potentially crash due to stack exhaustion. An attacker could intentionally crash a target program that uses OpenEXR by sending a malicious MTLX file. This is fixed in version 1.39.3.

A buffer overflow vulnerability exists in libsndfile version 1.2.2 and potentially earlier versions when processing malformed IRCAM audio files. The vulnerability occurs in the ircam_read_header function at src/ircam.c:164 during sample rate processing, leading to memory corruption and potential code execution.

IBM WebSphere Application Server 9.0 and WebSphere Application Server Liberty 17.0.0.3 through 25.0.0.7 are vulnerable to a denial of service, caused by a stack-based overflow. An attacker can send a specially crafted request that cause the server to consume excessive memory resources.

jq is a command-line JSON processor. In versions up to and including 1.7.1, a heap-buffer-overflow is present in function `jv_string_vfmt` in the jq_fuzz_execute harness from oss-fuzz. This crash happens on file jv.c, line 1456 `void* p = malloc(sz);`. As of time of publication, no patched versions are available.

A vulnerability in bmcweb of OpenBMC Project allows user to cause denial of service. This vulnerability was identified during mitigation for CVE-2022-2809. When fuzzing the multipart_parser code using AFL++ with address sanitizer enabled to find smallest memory corruptions possible. It detected problem in how multipart_parser handles unclosed http headers. If long enough http header is passed in the multipart form without colon there is one byte overwrite on heap. It can be conducted multiple times in a loop to cause DoS.

When Network Access is configured on a BIG-IP APM virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

procps-ng before version 3.3.15 is vulnerable to a stack buffer overflow in pgrep. This vulnerability is mitigated by FORTIFY, as it involves strncat() to a stack-allocated string. When pgrep is compiled with FORTIFY (as on Red Hat Enterprise Linux and Fedora), the impact is limited to a crash.

The function ClientEAPOLKeyRecvd() in the Realtek RTL8195A Wi-Fi Module prior to versions released in April 2020 (up to and excluding 2.08) does not validate the size parameter for an rtl_memcpy() operation, resulting in a stack buffer overflow which can be exploited for denial of service. An attacker can impersonate an Access Point and attack a vulnerable Wi-Fi client, by injecting a crafted packet into the WPA2 handshake. The attacker does not need to know the network's PSK.

A Stack-based buffer overflow vulnerability in the SonicOS SSLVPN service allows a remote unauthenticated attacker to cause Denial of Service (DoS), which could cause an impacted firewall to crash.

PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

Jsonxx or Json++ is a JSON parser, writer and reader written in C++. In affected versions of jsonxx json parsing may lead to stack exhaustion in an address sanitized (ASAN) build. This issue may lead to Denial of Service if the program using the jsonxx library crashes. This issue exists on the current commit of the jsonxx project and the project itself has been archived. Updates are not expected. Users are advised to find a replacement.

A Stack-based Buffer Overflow vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on MX Series and SRX series allows an unauthenticated networked attacker to cause a flowd crash and thereby a Denial of Service (DoS). Continued receipt of these specific packets will cause a sustained Denial of Service condition. This issue can be triggered by a specific Session Initiation Protocol (SIP) invite packet if the SIP ALG is enabled. Due to this, the PIC will be rebooted and all traffic that traverses the PIC will be dropped. This issue affects: Juniper Networks Junos OS 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R2; 21.3 versions prior to 21.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1.

Modbus Tools Modbus Slave (versions 7.4.2 and prior) is vulnerable to a stack-based buffer overflow in the registration field. This may cause the program to crash when a long character string is used.

A vulnerability was found in Tenda AC6 V15.03.05.16. The vulnerability affects the functionality of the /goform/fast_setting_wifi_set file form_fast_setting_wifi_set. Using the timeZone parameter causes a stack-based buffer overflow.

Tenda AC8V4.0 V16.03.34.06 was discovered to contain a stack overflow via the deviceid parameter in the get_parentControl_list_Info function.

Xlight FTP Server 3.9.3.6 contains a stack buffer overflow vulnerability in the 'Execute Program' configuration that allows attackers to crash the application. Attackers can trigger the vulnerability by inserting 294 characters into the program execution configuration, causing a denial of service condition.

Tenda i12 V1.0.0.10(3805) was discovered to contain a buffer overflow via the ping1 parameter in the formSetAutoPing function.