Dell Networking Switches running Enterprise SONiC versions 4.1.0, 4.0.5, 3.5.4 and below contains an improper input validation vulnerability. A remote unauthenticated malicious user may exploit this vulnerability and escalate privileges up to the highest administrative level. This is a Critical vulnerability affecting certain protocols, Dell recommends customers to upgrade at the earliest opportunity.

Dell OS10 Networking Switches running 10.5.2.x and above contain an OS command injection vulnerability when using remote user authentication. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands and possible system takeover. This is a critical vulnerability as it allows an attacker to cause severe damage. Dell recommends customers to upgrade at the earliest opportunity.

Dell SmartFabric Storage Software version 1.3 and lower contain an improper input validation vulnerability. A remote unauthenticated attacker may exploit this vulnerability and escalate privileges up to the highest administration level. This is a critical severity vulnerability affecting user authentication. Dell recommends customers to upgrade at the earliest opportunity.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution as root. Exploitation may lead to a system take over by an attacker. This vulnerability is considered critical as it can be leveraged to completely compromise the operating system. Dell recommends customers to upgrade at the earliest opportunity.

Dell NetWorker 19.6.1.2, contains an OS command injection Vulnerability in the NetWorker client. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. This is a high severity vulnerability as the exploitation allows an attacker to take complete control of a system, so Dell recommends customers to upgrade at the earliest opportunity.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the NetWorker Client execution service (nsrexecd) irrespective of any auth used.

EMC RepliStor Server Service before ESA-09-003 has a DoASOCommand Remote Code Execution Vulnerability. The flaw exists within the DoRcvRpcCall RPC function -exposed via the rep_srv.exe process- where the vulnerability is caused by an error when the rep_srv.exe handles a specially crafted packet sent by an unauthenticated attacker.

The Dell Openmanage CD launches X11 and SSH daemons that do not require authentication, which allows remote attackers to gain privileges.

Multiple buffer overflows in Wyse Device Manager (WDM) 4.7.x allow remote attackers to execute arbitrary code via (1) the User-Agent HTTP header to hserver.dll or (2) unspecified input to hagent.exe.

hagent.exe in Wyse Device Manager (WDM) 4.7.x does not require authentication for commands, which allows remote attackers to obtain management access via a crafted query, as demonstrated by a V52 query that triggers a power-off action.

Dell BSAFE SSL-J contains remediation for a covert timing channel vulnerability that may be exploited by malicious users to compromise the affected system. Only customers with active BSAFE maintenance contracts can receive details about this vulnerability. Public disclosure of the vulnerability details will be shared at a later date.

Dell EMC iDRAC7/iDRAC8, versions prior to 2.52.52.52, contain CGI injection vulnerability which could be used to execute remote code. A remote unauthenticated attacker may potentially be able to use CGI variables to execute remote code.

Networking OS10, versions prior to October 2021 with RESTCONF API enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.

Dell Integrated Remote Access Controller (iDRAC) 6 before 2.80 and 7/8 before 2.21.21.21 allows attackers to cause a denial of service (buffer overflow) or possibly have unspecified other impact via a long SSH username or input.

Dell Integrated Remote Access Controller (iDRAC) 7/8 before 2.21.21.21 has XXE.

RSA BSAFE Micro Edition Suite, versions prior to 4.0.11 (in 4.0.x) and prior to 4.1.6 (in 4.1.x), and RSA BSAFE Crypto-C Micro Edition, version prior to 4.0.5.3 (in 4.0.x) contain a Buffer Over-Read vulnerability when parsing ASN.1 data. A remote attacker could use maliciously constructed ASN.1 data that would result in such issue.

Dell SupportAssist contains a rate limit bypass issues in screenmeet API third party component. An unauthenticated attacker could potentially exploit this vulnerability and impersonate a legitimate dell customer to a dell support technician.

Dell BIOS contains an Improper Restriction of Excessive Authentication Attempts vulnerability. A local authenticated malicious administrator could exploit this vulnerability to bypass excessive admin password attempt mitigations in order to carry out a brute force attack.

Dell BIOS contains an Improper Restriction of Excessive Authentication Attempts vulnerability. A local authenticated malicious administrator could exploit this vulnerability to bypass excessive NVMe password attempt mitigations in order to carry out a brute force attack.

Dell Wyse Management Suite, versions WMS 4.4 and prior, contain an Improper Restriction of Excessive Authentication Attempts vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass.

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 8.4 through 8.5 contain an improper restriction of excessive authentication attempts vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.

Dell CloudBoost Virtual Appliance, versions 19.13.0.0 and prior, contains an Improper Restriction of Excessive Authentication Attempts vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.

Dell EMC Integrated Data Protection Appliance versions prior to 2.3 do not limit the number of authentication attempts to the ACM API. An authenticated remote user may exploit this vulnerability to launch a brute-force authentication attack in order to gain access to the system.

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

Server-Side Request Forgery (SSRF), Improperly Controlled Modification of Dynamically-Determined Object Attributes, Improper Restriction of Excessive Authentication Attempts vulnerability in YugaByte, Inc. Yugabyte Managed allows Accessing Functionality Not Properly Constrained by ACLs, Communication Channel Manipulation, Authentication Abuse.This issue affects Yugabyte Managed: from 2.0.0.0 through 2.13.0.0

In Omron PLC CS series, all versions, Omron PLC CJ series, all versions, and Omron PLC NJ series, all versions, the software does not implement sufficient measures to prevent multiple failed authentication attempts within in a short time frame, making it more susceptible to brute force attacks.

bl-kernel/security.class.php in Bludit 3.9.2 allows attackers to bypass a brute-force protection mechanism by using many different forged X-Forwarded-For or Client-IP HTTP headers.

An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. There is no bruteforce protection (e.g., lockout) established. An attacker might be able to bruteforce the password to authenticate on the device.

Advantech Spectre RT ERT351 Versions 5.1.3 and prior has insufficient login authentication parameters required for the web application may allow an attacker to gain full access using a brute-force password attack.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. The Authentication mechanism has no brute-force prevention.

AutoPi Wi-Fi/NB and 4G/LTE devices before 2019-10-15 allows an attacker to perform a brute-force attack or dictionary attack to gain access to the WiFi network, which provides root access to the device. The default WiFi password and WiFi SSID are derived from the same hash function output (input is only 8 characters), which allows an attacker to deduce the WiFi password from the WiFi SSID.

The SMB server's login mechanism does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

A lack of rate limiting in the login page of Safe App version a3.0.9 allows attackers to bypass authentication via a brute force attack.

Improper Restriction of Excessive Authentication Attempts in GitHub repository kareadita/kavita prior to 0.6.0.3.

Impact varies for each individual vulnerability in the application. For generation of accounts, it may be possible, depending on the amount of system resources available, to create a DoS event in the server. These accounts still need to be activated; however, it is possible to identify the output Status Code to separate accounts that are generated and waiting for email verification. \n\nFor the sign in directories, it is possible to brute force login attempts to either login portal, which could lead to account compromise.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

An attacker can decrypt the Ovarro TBox login password by communication capture and brute force attacks.

Insufficiently Protected Credentials vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access of when credentials are discovered after a brute force attack.

An improper restriction of excessive authentication attempts vulnerability [CWE-307] in FortiTester Telnet port 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated attacker to guess the credentials of an admin user via a brute force attack.

Improper Restriction of Excessive Authentication Attempts vulnerability in Akinsoft MyRezzta allows Authentication Bypass, Password Recovery Exploitation, Brute Force.This issue affects MyRezzta: from s2.03.01 before v2.05.01.

The maxView Storage Manager does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

BookWyrm is a social network for tracking reading. Versions prior to 0.4.5 were found to lack rate limiting on authentication views which allows brute-force attacks. This issue has been patched in version 0.4.5. Admins with existing instances will need to update their `nginx.conf` file that was created when the instance was set up. Users are advised advised to upgrade. Users unable to upgrade may update their nginx.conf files with the changes manually.

Zammad 5.2.0 is vulnerable to privilege escalation. Zammad has a prevention against brute-force attacks trying to guess login credentials. After a configurable amount of attempts, users are invalidated and logins prevented. An attacker might work around this prevention, enabling them to send more than the configured amount of requests before the user invalidation takes place.

WiJungle NGFW Version U250 was discovered to be vulnerable to No Rate Limit attack, allowing the attacker to brute force the admin password leading to Account Take Over.

Improper Restriction of Excessive Authentication Attempts vulnerability in Be Devious Web Development Password Reset with Code for WordPress REST API allows Authentication Abuse.This issue affects Password Reset with Code for WordPress REST API: from n/a through 0.0.15.

Medtronic CareLink Network allows an unauthenticated remote attacker to perform a brute force attack on an API endpoint that could be used to determine a valid password under certain circumstances. This issue affects CareLink Network: before December 4, 2025.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could cause brute force attacks to take over the admin account when the product does not implement a rate limit mechanism on the admin authentication form. Affected Products: Conext™ ComBox (All Versions)

SpliceCom Maximiser Soft PBX v1.5 and before does not restrict excessive authentication attempts, allowing attackers to bypass authentication via a brute force attack.

Outline is a service that allows for collaborative documentation. Outline implements an Email OTP login flow for users not associated with an Identity Provider. Starting in version 0.86.0 and prior to version 1.6.0, Outline does not invalidate OTP codes based on amount or frequency of invalid submissions, rather it relies on the rate limiter to restrict attempts. Consequently, identified bypasses in the rate limiter permit unrestricted OTP code submissions within the codes lifetime. This allows attackers to perform brute force attacks which enable account takeover. Version 1.6.0 fixes the issue.

The number of login attempts is not limited. This could allow an attacker to perform a brute force on HTTP basic authentication.