In NOKIA 1350 OMS R14.2, multiple OS Command Injection vulnerabilities occurs. This allows authenticated users to execute commands on the operating system.

Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/usb_restore_Form?script/.

In NOKIA NFM-T R19.9, an OS Command Injection vulnerability occurs in /cgi-bin/R19.9/log.pl of the VM Manager WebUI via the cmd HTTP GET parameter. This allows authenticated users to execute commands, with root privileges, on the operating system.

Vulnerability in Tenable Tenable.Io, Tenable Nessus, Tenable Security Center.This issue affects Tenable.Io: before Plugin Feed ID #202306261202 ; Nessus: before Plugin Feed ID #202306261202 ; Security Center: before Plugin Feed ID #202306261202 . This vulnerability could allow a malicious actor with sufficient permissions on a scan target to place a binary in a specific filesystem location, and abuse the impacted plugin in order to escalate privileges.

Under certain conditions, Nessus Network Monitor could allow a low privileged user to escalate privileges to NT AUTHORITY\SYSTEM on Windows hosts by replacing a specially crafted file.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of weak password requirements. A remote attacker with regular user privilege can easily infer the administrator password from system information after logging system, resulting in admin access and performing arbitrary system operations or disrupt service.

In Nokia One-NDS (aka Network Directory Server) through 20.9, some Sudo permissions can be exploited by some users to escalate to root privileges and execute arbitrary commands.

Multiple Improper Access Control was discovered in Nokia AirFrame BMC Web GUI < R18 Firmware v4.13.00. It does not properly validate requests for access to (or editing of) data and functionality in all endpoints under /#settings/* and /api/settings/*. By not verifying the permissions for access to resources, it allows a potential attacker to view pages, with sensitive data, that are not allowed, and modify system configurations also causing DoS, which should be accessed only by user with administration profile, bypassing all controls (without checking for user identity).

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to a stack buffer overflow via crafted HTTP POST request sent by a remote, authenticated attacker to /GponForm/usb_Form?script/. An attacker can leverage this vulnerability to potentially execute arbitrary code.

An issue was discovered in Nokia NetAct before 22 FP2211. On the Working Set Manager page, users can create a Working Set with a name that has a client-side template injection payload. Input validation is missing during creation of the working set. For an external attacker, it is very difficult to exploit this, because a few dynamically created parameters such as Jsession-id, a CSRF token, and an Nxsrf token would be needed. The attack can realistically only be performed by an internal user.

An issue was discovered in Nokia NetAct 22 through the Administration of Measurements website section. A malicious user can edit or add the templateName parameter in order to include malicious code, which is then downloaded as a .csv or .xlsx file and executed on a victim machine. Here, the /aom/html/EditTemplate.jsf and /aom/html/ViewAllTemplatesPage.jsf templateName parameter is used.

An issue was discovered in Nokia NetAct 22. A remote user, authenticated to the website, can visit the Site Configuration Tool section and arbitrarily upload potentially dangerous files without restrictions via the /netact/sct dir parameter in conjunction with the operation=upload value.

Nokia FastMile 3TG00118ABAD52 devices allow privilege escalation by an authenticated user via is_ctc_admin=1 to login_web_app.cgi and use of Import Config File.

SecurityCenter versions 5.5.0, 5.5.1 and 5.5.2 contain a SQL Injection vulnerability that could be exploited by an authenticated user with sufficient privileges to run diagnostic scans. An attacker could exploit this vulnerability by entering a crafted SQL query into the password field of a diagnostic scan within SecurityCenter. Successful exploitation of this vulnerability could allow an attacker to gain unauthorized access.

Nokia IMPACT < 18A: An unrestricted File Upload vulnerability was found that may lead to Remote Code Execution.

An issue was discovered in NOKIA AMS 9.7.05. Remote Code Execution exists via the debugger of the ipAddress variable. A remote user, authenticated to the AMS server, could inject code in the PING function. The privileges of the command executed depend on the user that runs the service.

In NOKIA 1350 OMS R14.2, multiple SQL Injection vulnerabilities occurs. Exploitation requires an authenticated attacker. Through the injection of arbitrary SQL statements, a potential authenticated attacker can modify query syntax and perform unauthorized (and unexpected) operations against the remote database.

In NOKIA NFM-T R19.9, a SQL Injection vulnerability occurs in /cgi-bin/R19.9/easy1350.pl of the VM Manager WebUI via the id or host HTTP GET parameter. An authenticated attacker is required for exploitation.

A DLL injection vulnerability exists where an authenticated, low-privileged local attacker could modify application files on the TIE Secure Relay host, which could allow for overriding of the configuration and running of new Secure Relay services.

A command injection vulnerability exists where an authenticated, remote attacker with administrator privileges on the Security Center application could modify Logging parameters, which could lead to the execution of arbitrary code on the Security Center host.

The web application allows user input to pass unfiltered to a command executed on the underlying operating system. The vulnerable component is bound to the network stack and the set of possible attackers extends up to and including the entire Internet. An attacker with low privileged access to the application has the potential to execute commands on the operating system under the context of the webserver.

The web application allows user input to pass unfiltered to a command executed on the underlying operating system. An attacker with high privileged access (administrator) to the application has the potential execute commands on the operating system under the context of the webserver. The vulnerable component is bound to the network stack and the set of possible attackers extends up to and including the entire Internet. Has the potential to inject command while creating a new User from User Management.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of insufficient filtering for user input. A remote attacker with administrator privilege can exploit this vulnerability to perform a Command Injection attack to execute arbitrary commands, disrupt the system or terminate services.

Command manipulation in LabKey Server Community Edition before 18.3.0-61806.763 allows an authenticated remote attacker to unmount any drive on the system leading to denial of service.

In NOKIA 1350 OMS R14.2, multiple OS Command Injection vulnerabilities occurs. This vulnerability allow unauthenticated users to execute commands on the operating system.

A vulnerability classified as critical has been found in D-Link DIR‑817L up to 1.04B01. This affects the function lxmldbc_system of the file ssdpcgi. The manipulation leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setDFSSetting of the file /goform/setLan. The manipulation of the argument lanNetmask/lanIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function um_inspect_cross_band of the file /goform/RP_setBasicAuto. The manipulation of the argument staticGateway leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

An OS command injection vulnerability in FortiWeb's management interface 6.3.7 and below, 6.2.3 and below, 6.1.x, 6.0.x, 5.9.x may allow a remote authenticated attacker to execute arbitrary commands on the system via the SAML server configuration page.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

The administrative web interface in Cisco TelePresence Video Communication Server Expressway X8.5.2 allows remote authenticated users to execute arbitrary commands via crafted fields, aka Bug ID CSCuv12531.

In the web ui of the openbuildservice before 2.3.0 a code injection of the project rebuildtimes statistics could be used by authorized attackers to execute shellcode.

MiR software versions prior to version 3.0.0 are affected by a command injection vulnerability. A malicious HTTP request crafted by an authenticated user could allow the execution of arbitrary commands on the underlying operating system.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DIR‑818L up to 1.05B01. This issue affects the function getenv of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

In some Lenovo ThinkServer-branded servers, a command injection vulnerability exists in the BMC firmware download command. This allows a privileged user to download and execute arbitrary code inside the BMC. This can only be exploited by authorized privileged users.

A vulnerability was determined in Wavlink WL-NU516U1 M16U1_V240425. This impacts the function sub_4032E4 of the file /cgi-bin/wireless.cgi. This manipulation of the argument Guest_ssid causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

Unitronics Unistream Unilogic – Versions prior to 1.35.227 - CWE-78: 'OS Command Injection' may allow RCE

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

A vulnerability has been found in TOTOLINK N350R 1.2.3-B20130826. This vulnerability affects unknown code of the file /boafrm/formSysCmd. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

An OS Command Injection vulnerability exists in SIMULIA 3DOrchestrate from Release 3DEXPERIENCE R2021x through Release 3DEXPERIENCE R2023x. A specially crafted HTTP request can lead to arbitrary command execution.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function setDeviceName of the file /goform/setDeviceName. The manipulation of the argument DeviceName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

Improper Input Validation vulnerability in N-able N-central allows OS Command Injection.This issue affects N-central: before 2025.3.1.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.