Improper buffer restrictions in the Intel(R) QAT Engine for OpenSSL before version 0.6.16 may allow a privileged user to potentially enable escalation of privilege via network access.

NVIDIA BMC contains a vulnerability in libwebsocket, where an authorized attacker can cause a buffer overflow and cause a denial of service or gain code execution.

A vulnerability was detected in D-Link DIR-513 1.10. This vulnerability affects the function formSetRoute of the file /goform/formSetRoute of the component POST Request Handler. The manipulation of the argument curTime results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-605L 2.13B01. This affects the function formAdvFirewall of the file /goform/formAdvFirewall of the component POST Request Handler. Such manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

NVIDIA BMC contains a vulnerability in IPMI handler, where an authorized attacker can cause a buffer overflow, which may lead to code execution, denial of service or escalation of privileges.

A flaw has been found in D-Link DIR-605L 2.13B01. Affected by this issue is the function formSetMACFilter of the file /goform/formSetMACFilter of the component POST Request Handler. This manipulation of the argument curTime causes buffer overflow. The attack may be initiated remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A stack-based buffer overflow vulnerability exists in the httpd downfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability.

A vulnerability was detected in Totolink A800R 4.1.2cu.5137_B20200730. This impacts the function setAppEasyWizardConfig in the library /lib/cste_modules/app.so. The manipulation of the argument apcliSsid results in buffer overflow. The attack can be executed remotely. The exploit is now public and may be used.

wire-avs provides Audio, Visual, and Signaling (AVS) functionality sure the secure messaging software Wire. Prior to versions 9.2.22 and 9.3.5, a remote format string vulnerability could potentially allow an attacker to cause a denial of service or possibly execute arbitrary code. The issue has been fixed in wire-avs 9.2.22 & 9.3.5 and is already included on all Wire products. No known workarounds are available.

A security vulnerability has been detected in UTT HiPER 1200GW up to 2.5.3-170306. This vulnerability affects the function strcpy of the file /goform/formNatStaticMap. The manipulation of the argument NatBind leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

Skyworth Digital Technology RN510 V.3.1.0.4 RN510 V.3.1.0.4 contains a buffer overflow vulnerability in /cgi-bin/app-staticIP.asp. An authenticated attacker can send a specially crafted request to endpoint which can lead to a denial of service (DoS) or possible code execution on the device.

Buffer Overflow vulnerability in Redis RedisGraph v.2.x through v.2.12.8 and fixed in v.2.12.9 allows an attacker to execute arbitrary code via the code logic after valid authentication.

A remote buffer overflow vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x: 6.5.4.16 and below; Aruba Instant 8.3.x: 8.3.0.12 and below; Aruba Instant 8.5.x: 8.5.0.6 and below; Aruba Instant 8.6.x: 8.6.0.2 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This affects the function strcpy of the file /goform/formNatStaticMap. Performing a manipulation of the argument NatBind results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A specially crafted TCP/IP packet may cause the camera recovery image web interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

A specially crafted TCP/IP packet may cause a camera recovery image telnet interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

A vulnerability was detected in D-Link DIR-605L 2.13B01. Affected by this vulnerability is the function formVirtualServ of the file /goform/formVirtualServ of the component POST Request Handler. The manipulation of the argument curTime results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The console in Puppet Enterprise 2015.x and 2016.x prior to 2016.4.0 includes unsafe string reads that potentially allows for remote code execution on the console node.

A security vulnerability has been detected in D-Link DIR-513 1.10. This affects the function formSetPassword of the file /goform/formSetPassword of the component POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security vulnerability has been detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. This issue affects the function strcpy of the file /goform/formConfigDnsFilterGlobal of the component Parameter Handler. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

Buffer overflow in Cisco Adaptive Security Appliance (ASA) Software through 9.4.2.3 on ASA 5500, ASA 5500-X, ASA Services Module, ASA 1000V, ASAv, Firepower 9300 ASA Security Module, PIX, and FWSM devices allows remote authenticated users to execute arbitrary code via crafted IPv4 SNMP packets, aka Bug ID CSCva92151 or EXTRABACON.

A vulnerability was determined in D-Link DIR-605L 2.13B01. This issue affects the function formSetDDNS of the file /goform/formSetDDNS of the component POST Request Handler. Executing a manipulation of the argument curTime can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected is the function strcpy of the file /goform/setSysAdm. Such manipulation of the argument GroupName leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

A vulnerability was determined in UTT HiPER 810G up to 1.7.7-171114. Affected is the function strcpy of the file /goform/formApLbConfig. This manipulation of the argument loadBalanceNameOld causes buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability in Pulse Connect Secure before 9.1R12 could allow an authenticated administrator or compromised Pulse Connect Secure device in a load-balanced configuration to perform a buffer overflow via a malicious crafted web request.

On BIG-IP DNS and GTM version 13.1.x before 13.1.0.4, and all versions of 12.1.x and 11.6.x, big3d does not securely handle and parse certain payloads resulting in a buffer overflow. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

A vulnerability was detected in Tenda AC21 16.03.08.16. Impacted is the function formSetQosBand of the file /goform/SetNetControlList. Performing a manipulation of the argument list results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UTT HiPER 810G up to 1.7.7-1711. This affects the function strcpy of the file /goform/formApMail. Executing a manipulation can lead to buffer overflow. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

A buffer overflow vulnerability exists in Windows File Resource Profiles in 9.X allows a remote authenticated user with privileges to browse SMB shares to execute arbitrary code as the root user. As of version 9.1R3, this permission is not enabled by default.

Multiple instances of incorrect calculation of buffer size in the Webmail and Administrative interface of FortiMail before 6.4.5 may allow an authenticated attacker with regular webmail access to trigger a buffer overflow and to possibly execute unauthorized code or commands via specifically crafted HTTP requests.

A vulnerability was determined in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/websHostFilter. This manipulation causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A stack-based buffer overflow vulnerability exists in the CMA check_udp_crc function of Garrett Metal Detectors’ iC Module CMA Version 5.0. A specially-crafted packet can lead to a stack-based buffer overflow during a call to memcpy. An attacker can send a malicious packet to trigger this vulnerability.

A security flaw has been discovered in UTT HiPER 810G up to 1.7.7-171114. This impacts the function strcpy of the file /goform/formRemoteControl. The manipulation results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in UTT HiPER 810G up to 1.7.7-171114. This affects the function strcpy of the file /goform/NTP. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.

A weakness has been identified in UTT HiPER 810G up to 1.7.7-171114. Affected is the function strcpy of the file /goform/formConfigDnsFilterGlobal. This manipulation causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in UTT HiPER 810G up to 1.7.7-1711. Affected by this issue is the function strcpy of the file /goform/getOneApConfTempEntry. Performing a manipulation results in buffer overflow. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in H3C Magic B1 up to 100R004. Affected by this vulnerability is the function Edit_BasicSSID_5G of the file /goform/aspForm. Such manipulation of the argument param leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Netgear EX6200 v1.0.3.94 was discovered to contain a buffer overflow via the wla_temp_ssid parameter at acosNvramConfig_set.

Four format string injection vulnerabilities exist in the web interface /action/wirelessConnect functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9Z and 6.9X. A specially-crafted HTTP request can lead to memory corruption, information disclosure and denial of service. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability arises from format string injection via the `default_key_id` HTTP parameter, as used within the `/action/wirelessConnect` handler.

A vulnerability was found in Tenda F453 1.0.0.3. This issue affects the function frmL7ImForm of the file /goform/L7Im. The manipulation of the argument page results in buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability was detected in D-Link DWR-M920 up to 1.1.50. This affects the function sub_423848 of the file /boafrm/formParentControl. Performing manipulation of the argument submit-url results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used.

A vulnerability has been found in Totolink EX1800T 9.1.0cu.2112_B20220316 and classified as critical. This vulnerability affects the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Tenda AC10U 15.03.06.48/15.03.06.49. This affects the function formSetPPTPUserList of the file /goform/setPptpUserList of the component HTTP POST Request Handler. This manipulation of the argument list causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formUser. Such manipulation of the argument passwd1 leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Tenda AC10U 15.03.06.48/15.03.06.49. Affected by this vulnerability is the function fromadvsetlanip of the file /goform/AdvSetLanip of the component POST Request Parameter Handler. Executing a manipulation of the argument lanMask can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A flaw has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTaskEdit. Executing a manipulation of the argument selDateType can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda AC20 up to 16.03.08.12. The impacted element is the function sscanf of the file /goform/PowerSaveSet. The manipulation of the argument powerSavingEn/time/powerSaveDelay/ledCloseType leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in UTT 进取 512W 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formFtpServerShareDirSelcet. Performing a manipulation of the argument oldfilename results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.