VNX Control Station in Dell EMC VNX2 OE for File versions prior to 8.1.9.236 contains OS command injection vulnerability. Due to inadequate restriction configured in sudores, a local authenticated malicious user could potentially execute arbitrary OS commands as root by exploiting this vulnerability.

A Command Execution Vulnerability exists in IBM Sterling External Authentication Server 2.2.0, 2.3.01, 2.4.0, and 2.4.1 via an unspecified OS command, which could let a local malicious user execute arbitrary code.

spice-vdagent up to and including 0.17.0 does not properly escape save directory before passing to shell, allowing local attacker with access to the session the agent runs in to inject arbitrary commands to be executed.

Improper Input Validation vulnerability in a particular configuration setting field of Hitachi Energy TXpert Hub CoreTec 4 product, allows an attacker with access to an authorized user with ADMIN or ENGINEER role rights to inject an OS command that is executed by the system. This issue affects: Hitachi Energy TXpert Hub CoreTec 4 version 2.0.0; 2.0.1; 2.1.0; 2.1.1; 2.1.2; 2.1.3; 2.2.0; 2.2.1.

A shell injection flaw was found in pglogical in versions before 2.3.4 and before 3.6.26. An attacker with CREATEDB privileges on a PostgreSQL server can craft a database name that allows execution of shell commands as the postgresql user when calling pglogical.create_subscription().

A vulnerability in the 'libsal.so' of the Zyxel GS1900 series firmware version 2.60 could allow an authenticated local user to execute arbitrary OS commands via a crafted function call.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

The Python console in Electrum through 2.9.4 and 3.x through 3.0.5 supports arbitrary Python code without considering (1) social-engineering attacks in which a user pastes code that they do not understand and (2) code pasted by a physically proximate attacker at an unattended workstation, which makes it easier for attackers to steal Bitcoin via hook code that runs at a later time when the wallet password has been entered, a different vulnerability than CVE-2018-1000022.

Cisco NX-OS allows local users to gain privileges and execute arbitrary commands via shell metacharacters in unspecified command parameters, aka Bug IDs CSCtf19827 and CSCtf27788.

A command injection vulnerability in command processing on Juniper Networks Junos OS Evolved allows an attacker with authenticated CLI access to be able to bypass configured access protections to execute arbitrary shell commands within the context of the current user. The vulnerability allows an attacker to bypass command authorization restrictions assigned to their specific user account and execute commands that are available to the privilege level for which the user is assigned. For example, a user that is in the super-user login class, but restricted to executing specific CLI commands could exploit the vulnerability to execute any other command available to an unrestricted admin user. This vulnerability does not increase the privilege level of the user, but rather bypasses any CLI command restrictions by allowing full access to the shell. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S1-EVO; All versions of 21.1-EVO and 21.2-EVO.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_dc utility. An authenticated attacker could potentially exploit this vulnerability, leading to the ability execute commands with root privileges.

Pi-hole is a Linux network-level advertisement and Internet tracker blocking application. Multiple privilege escalation vulnerabilities were discovered in version 5.2.4 of Pi-hole core. See the referenced GitHub security advisory for details.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability within its svc_cbr utility. An authenticated malicious user with local access could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

All versions of the package keep-module-latest are vulnerable to Command Injection due to missing input sanitization or other checks and sandboxes being employed to the installModule function. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a command injection vulnerability via the host_time parameter in the function NTPSyncWithHost.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability within its svc_udoctor utility. An authenticated malicious user with local access could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the FileName parameter in the function UploadFirmwareFile.

An OS command injection vulnerability exists in the MacOS Text-To-Speech class MacOSTTS of the significant-gravitas/autogpt project, affecting versions up to v0.5.0. The vulnerability arises from the improper neutralization of special elements used in an OS command within the `_speech` method of the MacOSTTS class. Specifically, the use of `os.system` to execute the `say` command with user-supplied text allows for arbitrary code execution if an attacker can inject shell commands. This issue is triggered when the AutoGPT instance is run with the `--speak` option enabled and configured with `TEXT_TO_SPEECH_PROVIDER=macos`, reflecting back a shell injection snippet. The impact of this vulnerability is the potential execution of arbitrary code on the instance running AutoGPT. The issue was addressed in version 5.1.0.

Terminal 1.3 in Apple Mac OS X 10.2 allows remote attackers to execute arbitrary commands via shell metacharacters in a telnet:// link, which is executed by Terminal.app window.

A vulnerability in the ConfD CLI and the Cisco Crosswork Network Services Orchestrator CLI could allow an authenticated, low-privileged, local attacker to read and write arbitrary files as root on the underlying operating system. This vulnerability is due to improper authorization enforcement when specific CLI commands are used. An attacker could exploit this vulnerability by executing an affected CLI command with crafted arguments. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system with the privileges of the root user.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to obtain read/write file system access on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root.

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.6, 7.6.0.0 through 7.6.0.15 and IBM MQ Appliance 8.0.0.0 through 8.0.0.12, 9.1.0.0 through 9.1.0.2, and 9.1.1 through 9.1.2 could allow a local attacker to execute arbitrary commands on the system, caused by a command injection vulnerability. IBM X-Force ID: 16188.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions with SINEMA Remote Connect Edge Client installed). Affected devices do not properly sanitize configuration parameters. This could allow a non-privileged local attacker to execute root commands on the device.

AppUse 4.0 allows shell command injection via a proxy field.

Qualys discovered that if unsanitized input was used with the library Modules::ScanDeps, before version 1.36 a local attacker could possibly execute arbitrary shell commands by open()ing a "pesky pipe" (such as passing "commands|" as a filename) or by passing arbitrary strings to eval().

Qualys discovered that needrestart, before version 3.8, passes unsanitized data to a library (Modules::ScanDeps) which expects safe input. This could allow a local attacker to execute arbitrary shell commands. Please see the related CVE-2024-10224 in Modules::ScanDeps.

Dell EMC RecoverPoint versions prior to 5.1.3 and RecoverPoint for VMs versions prior to 5.2.0.2 contain an OS command injection vulnerability in the installation feature of Boxmgmt CLI. A malicious boxmgmt user may potentially be able to execute arbitrary commands as root.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_cava utility. An authenticated attacker could potentially exploit this vulnerability, escaping the restricted shell and execute arbitrary operating system commands with root privileges.

The chroothole_client executable in UCOPIA Wireless Appliance before 5.1.8 allows remote attackers to gain root privileges via a dollar sign ($) metacharacter in the argument to chroothole_client.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_acldb_dump utility. An authenticated attacker could potentially exploit this vulnerability, leading to execution of arbitrary operating system commands with root privileges.

A vulnerability in the debug interface of Cisco IP Phone 8800 series could allow an authenticated, local attacker to execute arbitrary commands, aka Debug Shell Command Injection. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting additional command input to the affected parameter in the debug shell. Cisco Bug IDs: CSCvf80034.

Dell Unity, versions prior to 5.4, contain an OS Command Injection Vulnerability in its svc_topstats utility. An authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary commands with elevated privileges.

changetrack 4.3 allows local users to execute arbitrary commands via CRLF sequences and shell metacharacters in a filename in a directory that is checked by changetrack.

There is an OS command injection vulnerability in Crestron AM-300 firmware version 1.4499.00018 which may enable a user of a limited-access SSH session to escalate their privileges to root-level access.

A vulnerability classified as critical has been found in KylinSoft kylin-system-updater up to 2.0.5.16-0k2.33. Affected is an unknown function of the file /usr/share/kylin-system-updater/SystemUpdater/UpgradeStrategiesDbus.py of the component com.kylin.systemupgrade Service. The manipulation of the argument SetDownloadspeedMax leads to os command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-248940. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.

Multiple vulnerabilities in the restricted shell of Cisco Evolved Programmable Network Manager (EPNM), Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to escape the restricted shell and gain root privileges on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability, which was classified as critical, was found in kylin-system-updater up to 1.4.20kord on Ubuntu Kylin. Affected is the function InstallSnap of the component Update Handler. The manipulation leads to command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-222600.

An improper neutralization of special elements used in an OS Command vulnerability in FortiAP's console 6.4.1 through 6.4.5 and 6.2.4 through 6.2.5 may allow an authenticated attacker to execute unauthorized commands by running the kdbg CLI command with specifically crafted arguments.

An OS command injection (CWE-78) vulnerability in FortiWAN version 4.5.7 and below Command Line Interface may allow a local, authenticated and unprivileged attacker to escalate their privileges to root via executing a specially-crafted command.An OS command injection (CWE-78) vulnerability in FortiWAN Command Line Interface may allow a local, authenticated and unprivileged attacker to escalate their privileges to root via executing a specially-crafted command.

An improper input validation in FortiAI v1.4.0 and earlier may allow an authenticated user to gain system shell access via a malicious payload in the "diagnose" command.

On BIG-IP versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.3, 14.1.x before 14.1.4, and 13.1.x before 13.1.4, lack of input validation for items used in the system support functionality may allow users granted either "Resource Administrator" or "Administrator" roles to execute arbitrary bash commands on BIG-IP. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiADC version 7.0.0 through 7.0.1, 6.2.0 through 6.2.2, 6.1.0 through 6.1.6, 6.0.x, 5.x.x allows attacker to execute arbitrary shell code as `root` via CLI commands.

A argument injection vulnerability in the 'packet-trace' CLI command of Zyxel USG/ZyWALL series firmware versions 4.09 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, VPN series firmware versions 4.30 through 5.21, NSG series firmware versions 1.00 through 1.33 Patch 4, NXC2500 firmware version 6.10(AAIG.3) and earlier versions, NAP203 firmware version 6.25(ABFA.7) and earlier versions, NWA50AX firmware version 6.25(ABYW.5) and earlier versions, WAC500 firmware version 6.30(ABVS.2) and earlier versions, and WAX510D firmware version 6.30(ABTF.2) and earlier versions, that could allow a local authenticated attacker to execute arbitrary OS commands by including crafted arguments to the CLI command.

Versions of the package window-control before 1.4.5 are vulnerable to Command Injection via the sendKeys function, due to improper input sanitization.

All versions of the package create-choo-app3 are vulnerable to Command Injection via the devInstall function due to improper user-input sanitization.