Sielco PolyEco1000 uses a weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

The Theme My Login 2FA WordPress plugin before 1.2 does not rate limit 2FA validation attempts, which may allow an attacker to brute-force all possibilities, which shouldn't be too long, as the 2FA codes are 6 digits.

Shenzhen Tenda W30E V2 firmware versions up to and including V16.01.0.19(5037) do not enforce rate limiting or account lockout mechanisms on authentication endpoints. This allows attackers to perform unrestricted brute-force attempts against administrative credentials.

Dell PowerScale OneFS versions prior to 9.13.0.0 contains an improper restriction of excessive authentication attempts vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access.

VAXstations running Open VMS 5.3 through 5.5-2 with VMS DECwindows or MOTIF do not properly disable access to user accounts that exceed the break-in limit threshold for failed login attempts, which makes it easier for attackers to conduct brute force password guessing.

Dell RecoverPoint for Virtual Machines 6.0.x contains a vulnerability. An improper Restriction of Excessive Authentication vulnerability where a Network attacker could potentially exploit this vulnerability, leading to a brute force attack or a dictionary attack against the RecoverPoint login form and a complete system compromise. This allows attackers to brute-force the password of valid users in an automated manner.

In ExtremeGuest Essentials before 25.5.0, captive-portal may permit unauthorized access via manual brute-force procedure. Under certain ExtremeGuest Essentials captive-portal SSID configurations, repeated manual login attempts may allow an unauthenticated device to be marked as authenticated and obtain network access. Client360 logs may display the client MAC as the username despite no MAC-authentication being enabled.

An Improper Restriction of Excessive Authentication Attempts issue was discovered in Belden Hirschmann RS, RSR, RSB, MACH100, MACH1000, MACH4000, MS, and OCTOPUS Classic Platform Switches. An improper restriction of excessive authentication vulnerability in the web interface has been identified, which may allow an attacker to brute force authentication.

Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Mail Login allows Brute Force.This issue affects Mail Login: from 3.0.0 before 3.2.0, from 4.0.0 before 4.2.0.

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

EPSON WebConfig and Epson Web Control for SEIKO EPSON Projector Products do not restrict excessive authentication attempts. An administrative user's password may be identified through a brute force attack.

This vulnerability exists in Shilpi Client Dashboard due to missing restrictions for incorrect login attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on password, which could lead to gain unauthorized access to other user accounts.

An issue was discovered in weijiang1994 university-bbs (aka Blogin) in commit 9e06bab430bfc729f27b4284ba7570db3b11ce84 (2025-01-13). A weak verification code generation mechanism combined with missing rate limiting allows attackers to perform brute-force attacks on verification codes without authentication. Successful exploitation may result in account takeover via password reset or other authentication bypass methods.

Zitadel is open-source identity infrastructure software. Prior to 4.6.0, 3.4.3, and 2.71.18, an attacker can perform an online brute-force attack on OTP, TOTP, and passwords. While Zitadel allows preventing online brute force attacks in scenarios like TOTP, Email OTP, or passwords using a lockout mechanism. The mechanism is not enabled by default and can cause a denial of service for the corresponding user if enabled. Additionally, the mitigation strategies were not fully implemented in the more recent resource-based APIs. This vulnerability is fixed in 4.6.0, 3.4.3, and 2.71.18.

IBM Robotic Process Automation with Automation Anywhere 11 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161411.

The application does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it possible for an attacker to guess user credentials.

An issue in the BYD Dilink Headunit System v3.0 to v4.0 allows attackers to bypass authentication via a bruteforce attack.

A lack of rate limiting in the login mechanism of SigningHub v8.6.8 allows attackers to bypass authentication via a brute force attack.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available.

Improper Restriction of Excessive Authentication Attempts in GitHub repository wger-project/wger prior to 2.2.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

HCL AppScan Standard is vulnerable to excessive authorization attempts

A flaw was found in Red Hat Process Automation Manager 7 where an attacker can benefit from a brute force attack against Administration Console as the application does not limit the number of unsuccessful login attempts.

Improper Restriction of Excessive Authentication Attempts in GitHub repository janeczku/calibre-web prior to 0.6.20.

xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts.

Improper Restriction of Excessive Authentication Attempts in GitHub repository heroiclabs/nakama prior to 3.13.0. This results in login brute-force attacks.

In some cases, an unsuccessful attempt to log into IBM Spectrum Protect Operations Center 8.1.0.000 through 8.1.14.000 does not cause the administrator's invalid sign-on count to be incremented on the IBM Spectrum Protect Server. An attacker could exploit this vulnerability using brute force techniques to gain unauthorized administrative access to the IBM Spectrum Protect Server. IBM X-Force ID: 226325.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow an attacker to manipulate the admin after numerous attempts at guessing credentials. Affected Product: spaceLYnk (V2.6.2 and prior), Wiser for KNX (formerly homeLYnk) (V2.6.2 and prior), fellerLYnk (V2.6.2 and prior)

Dell PowerScale OneFS, versions 8.2.x-9.3.0.x, contain an improper restriction of excessive authentication attempts. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to compromised accounts.

An IBM Spectrum Protect storage agent could allow a remote attacker to perform a brute force attack by allowing unlimited attempts to login to the storage agent without locking the administrative ID. A remote attacker could exploit this vulnerability using brute force techniques to gain unauthorized administrative access to both the IBM Spectrum Protect storage agent and the IBM Spectrum Protect Server 8.1.0.000 through 8.1.14 with which it communicates. IBM X-Force ID: 226326.

Dell EMC AppSync versions 3.9 to 4.3 contain an Improper Restriction of Excessive Authentication Attempts Vulnerability that can be exploited from UI and CLI. An adjacent unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.

Improper Restriction of Excessive Authentication Attempts in GitHub repository mastodon/mastodon prior to 4.0.0.

vantage6 is an open source framework built to enable, manage and deploy privacy enhancing technologies like Federated Learning and Multi-Party Computation. If attacker gets access to an authenticated session, they can try to brute-force the user password by using the change password functionality: they can call that route infinitely which will return the message that password is wrong until it is correct. This vulnerability is fixed in 4.11.

The DIGITS: WordPress Mobile Number Signup and Login WordPress plugin before 8.4.6.1 does not rate limit OTP validation attempts, making it straightforward for attackers to bruteforce them.

Various rest resources in Fisheye and Crucible before version 4.8.9 allowed remote attackers to brute force user login credentials as rest resources did not check if users were beyond their max failed login limits and therefore required solving a CAPTCHA in addition to providing user credentials for authentication via a improper restriction of excess authentication attempts vulnerability.

Missing Rate Limiting in Web Applications operating on Business-DNA Solutions GmbH’s TopEase® Platform Version <= 7.1.27 on the Login Form allows an unauthenticated remote attacker to perform multiple login attempts, which facilitates gaining privileges.

The code that performs password matching when using 'Basic' HTTP authentication does not use a constant-time memcmp and has no rate-limiting. This means that an unauthenticated network attacker can brute-force the HTTP basic password, byte-by-byte, by recording the webserver's response time until the unauthorized (401) response.

Lack of rate limiting in M-Files Server and M-Files Web products with versions before 21.12.10873.0 in certain type of user accounts allows unlimited amount of attempts and therefore makes brute-forcing login accounts easier.

A brute-force protection bypass in CAPTCHA protection in ASUS ROG Rapture GT-AX11000, RT-AX3000, RT-AX55, RT-AX56U, RT-AX56U_V2, RT-AX58U, RT-AX82U, RT-AX82U GUNDAM EDITION, RT-AX86 Series(RT-AX86U/RT-AX86S), RT-AX86U ZAKU II EDITION, RT-AX88U, RT-AX92U, TUF Gaming AX3000, TUF Gaming AX5400 (TUF-AX5400), ASUS ZenWiFi XD6, ASUS ZenWiFi AX (XT8) before 3.0.0.4.386.45898, and RT-AX68U before 3.0.0.4.386.45911, allows a remote attacker to attempt any number of login attempts via sending a specific HTTP request.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists in PLC Simulator on EcoStruxureª Control Expert (now Unity Pro) (all versions) that could cause unauthorized command execution when a brute force attack is done over Modbus.

Gestsup before 3.2.10 allows account takeover through the password recovery functionality (remote). The affected component is the file forgot_pwd.php - it uses a weak algorithm for the generation of password recovery tokens (the PHP uniqueid function), allowing a brute force attack.

Improper restriction of excessive authentication attempts vulnerability in QSAN Storage Manager, XEVO, SANOS allows remote attackers to discover users’ credentials and obtain access via a brute force attack. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

Flysystem is an open source file storage library for PHP. The whitespace normalisation using in 1.x and 2.x removes any unicode whitespace. Under certain specific conditions this could potentially allow a malicious user to execute code remotely. The conditions are: A user is allowed to supply the path or filename of an uploaded file, the supplied path or filename is not checked against unicode chars, the supplied pathname checked against an extension deny-list, not an allow-list, the supplied path or filename contains a unicode whitespace char in the extension, the uploaded file is stored in a directory that allows PHP code to be executed. Given these conditions are met a user can upload and execute arbitrary code on the system under attack. The unicode whitespace removal has been replaced with a rejection (exception). For 1.x users, upgrade to 1.1.4. For 2.x users, upgrade to 2.1.1.

The SMB server's login mechanism does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers to access uncontrolled the login service at /webif/SecurityModule in a brute force attack. The password could be weak and default username is known as 'admin'. This is usable and part of an attack chain to gain SSH root access.

EyesOfNetwork 5.3-10 uses an integer of between 8 and 10 digits for the session ID, which might be leveraged for brute-force authentication bypass (such as in CVE-2021-27513 exploitation).

A lack of rate limiting in the login page of Safe App version a3.0.9 allows attackers to bypass authentication via a brute force attack.