D-Link Go-RT-AC750 GORTAC750_A1_FW_v101b03 contains a stack-based buffer overflow via the function hnap_main. An attacker can send a POST request to trigger the vulnerablilify.

Tenda AX12 v1.0 v22.03.01.16 was discovered to contain a stack overflow via the ssid parameter in the sub_431CF0 function.

An issue was discovered in NeoMutt before 2018-07-16. nntp_add_group in newsrc.c has a stack-based buffer overflow because of incorrect sscanf usage.

A flaw has been found in Tenda M3 1.0.0.12. Affected is the function formQuickIndex of the file /goform/QuickIndex. Executing manipulation of the argument PPPOEPassword can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

An issue was discovered in Samsung Mobile Chipset and Baseband Modem Chipset for Exynos 850, Exynos 980, Exynos 1080, Exynos 1280, Exynos 2200, Exynos Modem 5123, Exynos Modem 5300, and Exynos Auto T5123. A heap-based buffer overflow in the 5G MM message codec can occur due to insufficient parameter validation when decoding the extended emergency number list.

OpenConnect VPN client with GnuTLS before 5.02 contains a heap overflow if MTU is increased on reconnection.

There is a buffer overflow vulnerability in the underlying L2/L3 Management service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A vulnerability has been found in Tenda AC20 16.03.08.12. This affects the function set_qosMib_list of the file /goform/SetNetControlList of the component SetNetControlList Endpoint. The manipulation of the argument list leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in D-Link DIR-825 2.10. Affected by this vulnerability is the function get_ping_app_stat of the file ping_response.cgi of the component httpd. The manipulation of the argument ping_ipaddr leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A malicious DNS response can trigger a number of OOB reads, writes, and other memory issues

In nDPI through 3.2, there is a stack overflow in extractRDNSequence in lib/protocols/tls.c.

An issue was discovered in the client side of Zoho ManageEngine Desktop Central 10.0.552.W. An attacker-controlled server can trigger an integer overflow in InternetSendRequestEx and InternetSendRequestByBitrate that leads to a heap-based buffer overflow and Remote Code Execution with SYSTEM privileges. This issue will occur only when untrusted communication is initiated with server. In cloud, Agent will always connect with trusted communication.

There is a buffer overflow vulnerability in the underlying Utility daemon that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

A stack-based buffer overflow vulnerability exists in the Programming Software Connection FileSelect functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to stack-based buffer overflow. An attacker can send an unauthenticated packet to trigger this vulnerability.This CVE tracks the stack-based buffer overflow that occurs at offset `0xb6e84` of v1.2.10.9 of the P3-550E firmware.

A stack-based buffer overflow vulnerability exists in the Cloud API functionality of Tenda AC6 V5.0 V02.03.01.110. A specially crafted HTTP response can lead to arbitrary code execution. An attacker can send an HTTP response to trigger this vulnerability.

An Out-of-bounds Write in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to corrupt the memory of IO devices that use the library by sending a malicious RPC packet.

A stack-based buffer overflow vulnerability exists in the Programming Software Connection FileSelect functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to stack-based buffer overflow. An attacker can send an unauthenticated packet to trigger this vulnerability.This CVE tracks the stack-based buffer overflow that occurs at offset `0xb6e98` of v1.2.10.9 of the P3-550E firmware.

A stack buffer overflow occurs in net/at/src/at_server.c in RT-Thread through 5.0.2.

Memory safety bugs present in Firefox 123. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 124.

Heap-based buffer overflow in the SvrAppendReceivedChunk function in xlsasink.dll in the SMTP service of Exchange Server 2000 and 2003 allows remote attackers to execute arbitrary code via a crafted X-LINK2STATE extended verb request to the SMTP port.

An unauthenticated remote attacker can write memory out of bounds due to improper input validation in the MQTT stack. The brute force attack is not always successful because of memory randomization.

In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger writes outside of bounds of heap allocated buffers by inserting negative elements in the segment ids tensor. Users having access to `segment_ids_data` can alter `output_index` and then write to outside of `output_data` buffer. This might result in a segmentation fault but it can also be used to further corrupt the memory and can be chained with other vulnerabilities to create more advanced exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are all positive, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.

A malicious attacker could exploit the interface of the Fieldcomm Group HART-IP (release 1.0.0.0) by constructing messages with sufficiently large payloads to overflow the internal buffer and crash the device, or obtain control of the device.

A vulnerability was detected in Tenda AC1206 15.03.06.23. Affected is the function GetParentControlInfo of the file /goform/GetParentControlInfo. The manipulation of the argument mac results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used.

A Stack Based Buffer Overflow vulnerability in Tenda AC9 v.3.0 with firmware version v.15.03.06.42_multi allows a remote attacker to execute arbitrary code via the fromSetSysTime function.

A security vulnerability has been detected in Tenda AC21 and AC23 16.03.08.16. Affected is the function GetParentControlInfo of the file /goform/GetParentControlInfo. Such manipulation of the argument mac leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

Jsish v3.5.0 was discovered to contain a heap-buffer-overflow in ./src/jsiUtils.c.

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All versions < V5.2.5), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.0). The webserver of the affected devices contains a vulnerability that may lead to a heap overflow condition. An attacker could cause this condition on the webserver by sending specially crafted requests. This could stop the webserver temporarily.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

Stack-based Buffer Overflow vulnerability in the ONVIF server component of Victure PC420 smart camera allows an attacker to execute remote code on the target device. This issue affects: Victure PC420 firmware version 1.2.2 and prior versions.

A heap-based buffer overflow vulnerability exists in the GGUF library header.n_kv functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

An out-of-bounds write vulnerability exists in the sopen_FAMOS_read functionality of The Biosig Project libbiosig 2.5.0 and Master Branch (ab0ee111). A specially crafted .famos file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

Heap-based buffer overflow vulnerability exists in HOME SPOT CUBE2 V102 and earlier. By processing invalid values, arbitrary code may be executed. Note that the affected products are no longer supported.

A memory corruption issue was found in Artifex Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator can allow overriding of file access controls. The 'rsearch' calculation for the 'post' size resulted in a size that was too large, and could underflow to max uint32_t. This was fixed in commit 5d499272b95a6b890a1397e11d20937de000d31b.

Tenda FH1205 v2.0.0.7(775) has a stack overflow vulnerability in the page parameter from fromAddressNat function.

A vulnerability has been found in Tenda M3 1.0.0.12. Affected by this vulnerability is the function formGetMasterPassengerAnalyseData of the file /goform/getMasterPassengerAnalyseData. The manipulation of the argument Time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. In versions 0.3.10 and earlier, the bounds check for slices does not account for the ability for start + length to overflow when the values aren't literals. If a slice() function uses a non-literal argument for the start or length variable, this creates the ability for an attacker to overflow the bounds check. This issue can be used to do OOB access to storage, memory or calldata addresses. It can also be used to corrupt the length slot of the respective array.

Buffer Overflow vulnerability in the function setSchedWifi in Tenda AC9 v.3.0, firmware version v.15.03.06.42_multi allows a remote attacker to cause a denial of service or run arbitrary code via crafted overflow data.

Tenda AC1206 V15.03.06.23, F1202 V1.2.0.20(408), and FH1202 V1.2.0.20(408) were discovered to contain a stack overflow in the page parameter in the fromSetIpBind function.

A stack-based buffer overflow exists in IBM Merge Healthcare eFilm Workstation license server. A remote, unauthenticated attacker can exploit this vulnerability to achieve remote code execution with SYSTEM privileges.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. In 1.3.3 and earlier, a heap buffer overflow vulnerability persists in the Crypto_TC_ApplySecurity function due to an incomplete validation check on the fl (frame length) field. Although CVE-2025-29912 addressed an underflow issue involving fl, the patch fails to fully prevent unsafe calculations. As a result, an attacker can still craft malicious frames that cause a negative tf_payload_len, which is then interpreted as a large unsigned value, leading to a heap buffer overflow in a memcpy call.

D-Link DIR-882 DIR882A1_FW130B06 was discovered to contain a stack overflow via the sub_477AA0 function.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A buffer overflow vulnerability exists in all versions of sngrep since v0.4.2, due to improper handling of 'Call-ID' and 'X-Call-ID' SIP headers. The functions sip_get_callid and sip_get_xcallid in sip.c use the strncpy function to copy header contents into fixed-size buffers without checking the data length. This flaw allows remote attackers to execute arbitrary code or cause a denial of service (DoS) through specially crafted SIP messages.

Corosync through 3.1.9, if encryption is disabled or the attacker knows the encryption key, has a stack-based buffer overflow in orf_token_endian_convert in exec/totemsrp.c via a large UDP packet.

In Tenda AC9 v1.0 V15.03.05.14_multi, the wanMTU parameter of /goform/AdvSetMacMtuWan has a stack overflow vulnerability, which can lead to remote arbitrary code execution.

A heap-based buffer overflow vulnerability exists in the LookupTable::SetLUT functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted malformed file can lead to memory corruption. An attacker can provide a malicious file to trigger this vulnerability.