An issue was discovered on Shenzhen Coship WM3300 WiFi Router 5.0.0.55 devices. The password reset functionality of the Wireless SSID doesn't require any type of authentication. By making a POST request to the regx/wireless/wl_security_2G.asp URI, the attacker can change the password of the Wi-FI network.

The WS-SP UsernameToken policy in Apache CXF 2.4.5 and 2.5.1 allows remote attackers to bypass authentication by sending an empty UsernameToken as part of a SOAP request.

An insecure transport protocol used by Drobo Dashboard API on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows attackers to intercept network traffic.

In Drobo 5N2 4.0.5, all optional applications lack any form of authentication/authorization validation. As a result, any user capable of accessing the device over the network may interact with and control these applications. This not only poses a severe risk to the availability of these applications, but also poses severe risks to the confidentiality and integrity of data stored within the applications and the device itself.

A lack of authentication, in CA Unified Infrastructure Management 8.5.1, 8.5, and 8.4.7, allows remote attackers to conduct a variety of attacks, including file reading/writing.

ABB eSOMS version 6.0.2 may allow unauthorized access to the system when LDAP is set to allow anonymous authentication, and specific key values within the eSOMS web.config file are present. Both conditions are required to exploit this vulnerability.

GbScriptAddUp.asp in Advantech/BroadWin WebAccess before 7.0 does not properly perform authentication, which allows remote attackers to execute arbitrary code via unspecified vectors.

Entes EMG12 versions 2.57 and prior The application uses a web interface where it is possible for an attacker to bypass authentication with a specially crafted URL. This could allow for remote code execution.

Unspecified vulnerability in Trend Micro ServerProtect 5.7 and 5.58 allows remote attackers to execute arbitrary code via vectors related to obtaining "administrative access to the RPC interface."

Wi2be SMART HP WMT R1.2.20_201400922 allows unauthorized remote attackers to reset the admin password via the /ConfigWizard/ChangePwd.esp?2admin URL (Attackers can login using the "admin" username with password "admin" after a successful attack).

The TELNET daemon in Siemens WinCC flexible 2004, 2005, 2007, and 2008; WinCC V11 (aka TIA portal); the TP, OP, MP, Comfort Panels, and Mobile Panels SIMATIC HMI panels; WinCC V11 Runtime Advanced; and WinCC flexible Runtime does not perform authentication, which makes it easier for remote attackers to obtain access via a TCP session.

Authentication bypass vulnerability in mod_nss 1.0.8 allows remote attackers to assume the identity of a valid user by using their certificate and entering 'password' as the password.

The ComputePassword function in the Schneider Electric Quantum Ethernet Module on the NOE 771 device (aka the Quantum 140NOE771* module) generates the password for the fwupgrade account by performing a calculation on the MAC address, which makes it easier for remote attackers to obtain access via a (1) ARP request message or (2) Neighbor Solicitation message.

The check_password function in html/admin/login.php in PacketFence before 3.0.2 allows remote attackers to bypass authentication via an empty password.

An authentication bypass flaw was found in the smart_proxy_dynflow component used by Foreman. A malicious attacker can use this flaw to remotely execute arbitrary commands on machines managed by vulnerable Foreman instances, in a highly privileged context.

OneOrZero Action & Information Management System (AIMS) 2.7.0 allows remote attackers to bypass authentication and obtain administrator privileges via a crafted oozimsrememberme cookie.

CEServer.exe in the CEServer component in the Remote Agent module in InduSoft Web Studio 6.1 and 7.0 does not require authentication, which allows remote attackers to execute arbitrary code via vectors related to creation of a file, loading a DLL, and process control.

Incorrect access control in the Dashboard API on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows attackers to bypass authentication due to insecure token generation.

An authentication bypass vulnerability has been identified in Pulpcore when deployed with Gunicorn versions prior to 22.0, due to the puppet-pulpcore configuration. This issue arises from Apache's mod_proxy not properly unsetting headers because of restrictions on underscores in HTTP headers, allowing authentication through a malformed header. This flaw impacts all active Satellite deployments (6.13, 6.14 and 6.15) which are using Pulpcore version 3.0+ and could potentially enable unauthorized users to gain administrative access.

IBM WebSphere Commerce 6.x through 6.0.0.11 and 7.x through 7.0.0.3 does not properly implement Activity Token authentication for Web Services, which has unspecified impact and attack vectors.

TCPUploadServer.exe in Progea Movicon 11.2 before Build 1084 does not require authentication for critical functions, which allows remote attackers to obtain sensitive information, delete files, execute arbitrary programs, or cause a denial of service (crash) via a crafted packet to TCP port 10651.

On TP-Link TL-WR841N v13 00000001 0.9.1 4.16 v0001.0 Build 171019 Rel.55346n devices, all actions in the web interface are affected by bypass of authentication via an HTTP request.

Hycus CMS 1.0.4 allows Authentication Bypass via "'=' 'OR'" credentials.

The host-services component in Symantec pcAnywhere 12.5.x through 12.5.3, and IT Management Suite pcAnywhere Solution 7.0 (aka 12.5.x) and 7.1 (aka 12.6.x), does not properly filter login and authentication data, which allows remote attackers to execute arbitrary code via a crafted session on TCP port 5631.

SV3C L-SERIES HD CAMERA V2.3.4.2103-S50-NTD-B20170508B devices improperly identifies users only by the authentication level sent in the cookies, which allow remote attackers to bypass authentication and gain administrator access by setting the authLevel cookie to 255.

Adobe Connect versions 9.7.5 and earlier have an Authentication Bypass vulnerability. Successful exploitation could lead to session hijacking.

PAM exposure enabling unauthenticated access to remote host

The remote console in the Server Controller in IBM Lotus Domino 7.x and 8.x verifies credentials against a file located at a UNC share pathname specified by the client, which allows remote attackers to bypass authentication, and consequently execute arbitrary code, by placing this pathname in the COOKIEFILE field. NOTE: this might overlap CVE-2011-0920.

A remote attacker can bypass the Management Mode on the Canon LBP7110Cw web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

The SV3C HD Camera (L-SERIES V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B) is affected by an improper authentication vulnerability that allows requests to be made to back-end CGI scripts without a valid session. This vulnerability could be used to read and modify the configuration. The vulnerability affects all versions.

ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.

The Java Servlet framework on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug IDs CSCtf42005 and CSCtf42008.

Dell EMC ScaleIO versions prior to 2.5, contain improper restriction of excessive authentication attempts on the Light installation Agent (LIA). This component is deployed on every server in the ScaleIO cluster and is used for central management of ScaleIO nodes. A remote malicious user, having network access to LIA, could potentially exploit this vulnerability to launch brute force guessing of user names and passwords of user accounts on the LIA.

The Symantec Messaging Gateway product prior to 10.6.6 may be susceptible to an authentication bypass exploit, which is a type of issue that can allow attackers to potentially circumvent security mechanisms currently in place and gain access to the system or network.

An issue was discovered in the Ldap component in Symfony 2.8.x before 2.8.37, 3.3.x before 3.3.17, 3.4.x before 3.4.7, and 4.0.x before 4.0.7. It allows remote attackers to bypass authentication by logging in with a "null" password and valid username, which triggers an unauthenticated bind. NOTE: this issue exists because of an incomplete fix for CVE-2016-2403.

The Java Servlet framework on Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug ID CSCtf01253.

A remote attacker can bypass the System Manager Mode on the Canon MF210 and MF220 web interface without knowing the PIN for /login.html via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

Improper Authentication vulnerability in the "LDAP / SSO Authentication" (ig_ldap_sso_auth) extension 2.0.0 for TYPO3.

Dell iDRAC9 versions 5.00.00.00 and later but prior to 5.10.10.00, contain an improper authentication vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access to the VNC Console.

servermgrd (Server Manager) in Apple Mac OS X 10.5.6 does not properly validate authentication credentials, which allows remote attackers to modify the system configuration.

An issue was discovered on Crestron HD-MD4X2-4K-E 1.0.0.2159 devices. When the administrative web interface of the HDMI switcher is accessed unauthenticated, user credentials are disclosed that are valid to authenticate to the web interface. Specifically, aj.html sends a JSON document with uname and upassword fields.

This vulnerability allows remote attackers to bypass authentication on vulnerable installations of Quest NetVault Backup 11.2.0.13. The specific flaw exists within JSON RPC Request handling. By setting the checksession parameter to a specific value, it is possible to bypass authentication to critical functions. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-4752.

A weak Cookie parameter is used in the web application of Moxa OnCell G3100-HSPA Series version 1.4 Build 16062919 and prior. An attacker can brute force parameters required to bypass authentication and access the web interface to use all its functions except for password change.

Sysaid – Sysaid System Takeover - An attacker can bypass the authentication process by accessing to: /wmiwizard.jsp, Then to: /ConcurrentLogin.jsp, then click on the login button, and it will redirect you to /home.jsp without any authentication.

For Crestron TSW-X60 version prior to 2.001.0037.001 and MC3 version prior to 1.502.0047.001, The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.

By using a specific credential string, an attacker with network access to the device’s web interface could circumvent the authentication scheme and perform administrative operations.

Dell EMC ECS versions 3.2.0.0 and 3.2.0.1 contain an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to read and modify S3 objects by supplying specially crafted S3 requests.

The login method in LoginModule implementations in Apache Geronimo 2.0 does not throw FailedLoginException for failed logins, which allows remote attackers to bypass authentication requirements, deploy arbitrary modules, and gain administrative access by sending a blank username and password with the command line deployer in the deployment module.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization and authentication checks on multiple API routes. An attacker may gain access to these API routes and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.