Signal K Server is a server application that runs on a central hub in a boat. Prior to version 2.24.0-beta.1, the SignalK Server exposes an unauthenticated HTTP endpoint that allows remote attackers to modify navigation data source priorities. This endpoint, accessible via PUT /signalk/v1/api/sourcePriorities, does not enforce authentication or authorization checks and directly assigns user-controlled input to the server configuration. As a result, attackers can influence which GPS, AIS, or other sensor data sources are trusted by the system. The changes are immediately applied and persisted to disk, allowing the manipulation to survive server restarts. This issue has been patched in version 2.24.0-beta.1.

The Angeet ES3 KVM allows a remote, unauthenticated attacker to write arbitrary files, including configuration files or system binaries. Modified configuration files or system binaries could allow an attacker to take complete control of a vulnerable system.

An issue was discovered in Couchbase Server before 7.0.4. The Index Service does not enforce authentication for TCP/TLS servers.

In ApexPro Telemetry Server Versions 4.2 and prior, CARESCAPE Telemetry Server v4.2 & prior, Clinical Information Center (CIC) Versions 4.X and 5.X, CARESCAPE Central Station (CSCS) Versions 1.X and CARESCAPE Central Station (CSCS) Versions 2.X, the integrated service for keyboard switching of the affected devices could allow attackers to obtain remote keyboard input access without authentication over the network.

A vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.6.6). The affected application does not require authenticated access for privileged functions. This could allow an unauthenticated attacker to change data of a user, such as credentials, in case that user's id is known.

Missing Authentication for Critical Function vulnerability in Microchip TimePictra allows Configuration/Environment Manipulation.This issue affects TimePictra: from 11.0 through 11.3 SP2.

Honeywell Experion PKS Safety Manager through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0051, there is a Honeywell Experion PKS Safety Manager multiple proprietary protocols with unauthenticated functionality issue. The affected components are characterized as: Honeywell Experion TCP (51000/TCP), Safety Builder (51010/TCP). The potential impact is: Manipulate controller state, Manipulate controller configuration, Manipulate controller logic, Manipulate controller files, Manipulate IO. The Honeywell Experion PKS Distributed Control System (DCS) Safety Manager utilizes several proprietary protocols for a wide variety of functionality, including process data acquisition, controller steering and configuration management. These protocols include: Experion TCP (51000/TCP) and Safety Builder (51010/TCP). None of these protocols have any authentication features, allowing any attacker capable of communicating with the ports in question to invoke (a subset of) desired functionality. There is no authentication functionality on the protocols in question. An attacker capable of invoking the protocols' functionalities could achieve a wide range of adverse impacts, including (but not limited to), the following: for Experion TCP (51000/TCP): Issue IO manipulation commands, Issue file read/write commands; and for Safety Builder (51010/TCP): Issue controller start/stop commands, Issue logic download/upload commands, Issue file read commands, Issue system time change commands. A mitigating factor with regards to some, but not all, of the above functionality is that these require the Safety Manager physical keyswitch to be in the right position.

The Motorola MOSCAD and ACE line of RTUs through 2022-05-02 omit an authentication requirement. They feature IP Gateway modules which allow for interfacing between Motorola Data Link Communication (MDLC) networks (potentially over a variety of serial, RF and/or Ethernet links) and TCP/IP networks. Communication with RTUs behind the gateway is done by means of the proprietary IPGW protocol (5001/TCP). This protocol does not have any authentication features, allowing any attacker capable of communicating with the port in question to invoke (a subset of) desired functionality.

Parse Dashboard is a standalone dashboard for managing Parse Server apps. In versions 7.3.0-alpha.42 through 9.0.0-alpha.7, the AI Agent API endpoint (POST `/apps/:appId/agent`) has multiple security vulnerabilities that, when chained, allow unauthenticated remote attackers to perform arbitrary read and write operations against any connected Parse Server database using the master key. The agent feature is opt-in; dashboards without an agent config are not affected. The fix in version 9.0.0-alpha.8 adds authentication, CSRF validation, and per-app authorization middleware to the agent endpoint. Read-only users are restricted to the `readOnlyMasterKey` with write permissions stripped server-side. A cache key collision between master key and read-only master key was also corrected. As a workaround, remove or comment out the agent configuration block from your Parse Dashboard configuration.

A vulnerability has been identified in DIGSI 4 (All versions < V4.92), EN100 Ethernet module DNP3 variant (All versions < V1.05.00), EN100 Ethernet module IEC 104 variant (All versions), EN100 Ethernet module IEC 61850 variant (All versions < V4.30), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module PROFINET IO variant (All versions). The device engineering mechanism allows an unauthenticated remote user to upload a modified device configuration overwriting access authorization passwords.

A vulnerability has been identified in EN100 Ethernet module IEC 61850 variant (All versions < V4.30), EN100 Ethernet module DNP3 variant (All versions < V1.04), EN100 Ethernet module PROFINET IO variant (All versions), EN100 Ethernet module Modbus TCP variant (All versions), EN100 Ethernet module IEC 104 variant (All versions < V1.22). The web interface (TCP/80) of affected devices allows an unauthenticated user to upgrade or downgrade the firmware of the device, including to older versions with known vulnerabilities.

Anviz CX2 Lite and CX7 are vulnerable to unauthenticated POST requests that modify debug settings (e.g., enabling SSH), allowing unauthorized state changes that can facilitate later compromise.

Barco Control Room Management Suite web application, which is part of TransForm N before 3.14, is exposing a license file upload mechanism. This upload can be executed without authentication.

An external config control vulnerability exists in the OAS Engine SecureAddSecurity functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted series of network requests can lead to the creation of a custom Security Group. An attacker can send a sequence of requests to trigger this vulnerability.

Mautic allows you to update the application via an upgrade script. The upgrade logic isn't shielded off correctly, which may lead to vulnerable situation. This vulnerability is mitigated by the fact that Mautic needs to be installed in a certain way to be vulnerable.

An external config control vulnerability exists in the OAS Engine SecureAddUser functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted series of network requests can lead to the creation of an OAS user account. An attacker can send a sequence of requests to trigger this vulnerability.

Lexmark products through 2022-02-10 have Incorrect Access Control.

An issue was discovered in GitLab Enterprise Edition 11.2.x through 11.4.x before 11.4.13, 11.5.x before 11.5.6, and 11.6.x before 11.6.1. It has Incorrect Access Control.

The /device/acceptBind end-point for Ourphoto App version 1.4.1 does not require authentication or authorization. The user_token header is not implemented or present on this end-point. An attacker can send a request to bind their account to any users picture frame, then send a POST request to accept their own bind request, without the end-users approval or interaction.

Missing authentication on ShenYu Admin when register by HTTP. This issue affected Apache ShenYu 2.4.0 and 2.4.1.

A CWE-306: Missing Authentication for Critical Function vulnerability exists that could allow modifications of the touch configurations in an unauthorized manner when an attacker attempts to modify the touch configurations. Affected Product: spaceLYnk (V2.6.2 and prior), Wiser for KNX (formerly homeLYnk) (V2.6.2 and prior), fellerLYnk (V2.6.2 and prior)

A vulnerability, which was classified as problematic, was found in TOTOLINK A3700R 9.1.2u.5822_B20200513. Affected is an unknown function of the file /wizard.html of the component Password Reset Handler. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272568. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the HTTPS proxy feature of Cisco Wide Area Application Services (WAAS) Software could allow an unauthenticated, remote attacker to use the Central Manager as an HTTPS proxy. The vulnerability is due to insufficient authentication of proxy connection requests. An attacker could exploit this vulnerability by sending a malicious HTTPS CONNECT message to the Central Manager. A successful exploit could allow the attacker to access public internet resources that would normally be blocked by corporate policies.

Eibiz i-Media Server Digital Signage 3.8.0 contains an authentication bypass vulnerability that allows unauthenticated attackers to create admin users through AMF-encoded object manipulation. Attackers can send crafted serialized objects to the /messagebroker/amf endpoint to create administrative users without authentication, bypassing security controls.

The CMP WordPress plugin before 4.0.19 allows any user, even not logged in, to arbitrarily change the coming soon page layout.

PolarLearn is a free and open-source learning program. In 0-PRERELEASE-16 and earlier, the group chat WebSocket at wss://polarlearn.nl/api/v1/ws can be used without logging in. An unauthenticated client can subscribe to any group chat by providing a group UUID, and can also send messages to any group. The server accepts the message and stores it in the group’s chatContent, so this is not just a visual spam issue.

Incorrect access control in AMAG Symmetry Door Edge Network Controllers (EN-1DBC Boot App 23611 03.60 and STD App 23603 03.60; EN-2DBC Boot App 24451 01.00 and STD App 2461 01.00) enables remote attackers to execute door controller commands (e.g., lock, unlock, add ID card value) by sending unauthenticated requests to the affected devices via Serial over TCP/IP, as demonstrated by a Ud command.

ONLYOFFICE all versions as of 2021-11-08 is affected by Incorrect Access Control. An authentication bypass in the document editor allows attackers to edit documents without authentication.

Gnuboard 5.5.4 and 5.5.5 is vulnerable to Insecure Permissions. An attacker can change password of all users without knowing victim's original password.

Yoke is a Helm-inspired infrastructure-as-code (IaC) package deployer. In 0.19.0 and earlier, a vulnerability exists in the Air Traffic Controller (ATC) component of Yoke. The ATC webhook endpoints lack proper authentication mechanisms, allowing any pod within the cluster network to directly send AdmissionReview requests to the webhook, bypassing Kubernetes API Server authentication. This enables attackers to trigger WASM module execution in the ATC controller context without proper authorization.

ESPHome is a system to control the ESP8266/ESP32. Anyone with web_server enabled and HTTP basic auth configured on version 2021.9.1 or older is vulnerable to an issue in which `web_server` allows over-the-air (OTA) updates without checking user defined basic auth username & password. This issue is patched in version 2021.9.2. As a workaround, one may disable or remove `web_server`.

A vulnerability in the API of Cisco Application Services Engine Software could allow an unauthenticated, remote attacker to update event policies on an affected device. The vulnerability is due to insufficient authentication of users who modify policies on an affected device. An attacker could exploit this vulnerability by crafting a malicious HTTP request to contact an affected device. A successful exploit could allow the attacker to update event policies on the affected device.

OpenClaw is a personal AI assistant. Versions 2026.2.13 and below allow the optional @openclaw/voice-call plugin Telnyx webhook handler to accept unsigned inbound webhook requests when telnyx.publicKey is not configured, enabling unauthenticated callers to forge Telnyx events. Telnyx webhooks are expected to be authenticated via Ed25519 signature verification. In affected versions, TelnyxProvider.verifyWebhook() could effectively fail open when no Telnyx public key was configured, allowing arbitrary HTTP POST requests to the voice-call webhook endpoint to be treated as legitimate Telnyx events. This only impacts deployments where the Voice Call plugin is installed, enabled, and the webhook endpoint is reachable from the attacker (for example, publicly exposed via a tunnel/proxy). The issue has been fixed in version 2026.2.14.

GitLab Community and Enterprise Editions before 10.1.6, 10.2.6, and 10.3.4 are vulnerable to an authorization bypass issue in the GitLab import component resulting in an attacker being able to perform operations under a group in which they were previously unauthorized.

An authentication bypass vulnerability in the CRUDLab WP Like Button plugin through 1.6.0 for WordPress allows unauthenticated attackers to change settings. The contains() function in wp_like_button.php did not check if the current request is made by an authorized user, thus allowing any unauthenticated user to successfully update settings, as demonstrated by the wp-admin/admin.php?page=facebook-like-button each_page_url or code_snippet parameter.

ClickStudios Passwordstate Password Reset Portal prior to build 8501 is affected by an authentication bypass vulnerability. The ResetPassword function does not validate whether the user has successfully authenticated using security questions. An unauthenticated, remote attacker can send a crafted HTTP request to the /account/ResetPassword page to set a new password for any registered user.

An issue was discovered on Samsung mobile devices with Q(10.0) software. The DynamicLockscreen Terms and Conditions can be accepted without authentication. The Samsung ID is SVE-2020-17079 (October 2020).

Asus RT-N12E 2.0.0.39 is affected by an incorrect access control vulnerability. Through system.asp / start_apply.htm, an attacker can change the administrator password without any authentication.

Lack of authentication in the network relays used in MEGVII Koala 2.9.1-c3s allows attackers to grant physical access to anyone by sending packet data to UDP port 5000.

The includes/gateways/stripe/includes/admin/admin-actions.php in GiveWP plugin through 2.5.9 for WordPress allows unauthenticated settings change.

TOTOLINK X6000R V9.4.0cu.852_B20230719 is vulnerable to Incorrect Access Control.Attackers can reset login password & WIFI passwords without authentication.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not restrict unauthenticated access to certain pages of the web interface. This could allow an attacker to delete log files without authentication.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /registerCpe requests.

IBM Sterling Partner Engagement Manager 6.1.2, 6.2.0, and 6.2.2 could allow a remote user to perform unauthorized actions due to improper authentication. IBM X-Force ID: 266896.

Zoho ManageEngine ServiceDesk Plus before 11.1 build 11115 allows remote unauthenticated attackers to change the installation status of deployed agents.

A vulnerability has been identified in SENTRON 7KT PAC1260 Data Manager (All versions). The web interface of affected devices provides an endpoint that allows to enable the ssh service without authentication. This could allow an unauthenticated remote attacker to enable remote access to the device via ssh.

GitLab 7.10 through 12.8.1 has Incorrect Access Control. Under certain conditions where users should have been required to configure two-factor authentication, it was not being required.

A vulnerability has been identified in SICAM MMU (All versions < V2.05), SICAM SGU (All versions), SICAM T (All versions < V2.18). An attacker with access to the network could be able to install specially crafted firmware to the device.

The createComment mutation in the WPGraphQL 0.2.3 plugin for WordPress allows unauthenticated users to post comments on any article, even when 'allow comment' is disabled.

Talend Data Catalog remote harvesting server before 8.0-20230413 contains a /upgrade endpoint that allows an unauthenticated WAR file to be deployed on the server. (A mitigation is that the remote harvesting server should be behind a firewall that only allows access to the Talend Data Catalog server.)