A memory corruption vulnerability has been identified in WECON LeviStudioU version 1.8.56 and prior, which may allow arbitrary code execution. Mat Powell, Ziad Badawi, and Natnael Samson working with Trend Micro's Zero Day Initiative, reported these vulnerabilities to NCCIC.

Multiple stack-based buffer overflow vulnerabilities in WECON LeviStudioU version 1.8.56 and prior may be exploited when parsing strings within project files. The process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage these vulnerabilities to execute code under the context of the current process. Mat Powell, Ziad Badawi, and Natnael Samson working with Trend Micro's Zero Day Initiative, reported these vulnerabilities to NCCIC.

Heap-based buffer overflow vulnerabilities in Advantech WebAccess HMI Designer 2.1.7.32 and prior caused by processing specially crafted .pm3 files may allow remote code execution.

WECON LeviStudioU Versions 2019-09-21 and prior are vulnerable to multiple stack-based buffer overflow instances while parsing project files, which may allow an attacker to execute arbitrary code.

WECON Technology Co., Ltd. PI Studio HMI versions 4.1.9 and prior and PI Studio versions 4.2.34 and prior parse files and pass invalidated user data to an unsafe method call, which may allow code to be executed in the context of an administrator.

CNCSoft Version 1.00.83 and prior with ScreenEditor Version 1.00.54 has multiple stack-based buffer overflow vulnerabilities that could cause the software to crash due to lacking user input validation before copying data from project files onto the stack. Which may allow an attacker to gain remote code execution with administrator privileges if exploited.

WECON LeviStudio Versions 1.8.29 and 1.8.44 have multiple stack-based buffer overflow vulnerabilities that can be exploited when the application processes specially crafted project files.

A Heap-Based Buffer Overflow issue was discovered in Wecon Technologies LEVI Studio HMI Editor before 1.8.1. This vulnerability causes a buffer overflow when a maliciously crafted project file is run by the system.

WECON LeviStudio Versions 1.8.29 and 1.8.44 have multiple heap-based buffer overflow vulnerabilities that can be exploited when the application processes specially crafted project files.

WECON LeviStudioU Versions 2019-09-21 and prior are vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute code.

WECON LeviStudioU Versions 2019-09-21 and prior are vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute code.

A heap-based buffer overflow vulnerability exists within the WECON LeviStudioU Release Build 2019-09-21 and prior when processing project files. Opening a specially crafted project file could allow an attacker to exploit and execute code under the privileges of the application.

Multiple buffer overflow vulnerabilities exist when LeviStudioU (Version 2019-09-21 and prior) processes project files. Opening a specially crafted project file could allow an attacker to exploit and execute code under the privileges of the application.

PLC Editor Versions 1.3.8 and prior is vulnerable to an out-of-bounds write while processing project files, which may allow an attacker to execute arbitrary code.

Cscape, 9.80 SP4 and prior. An improper input validation vulnerability may be exploited by processing specially crafted POC files. This may allow an attacker to read confidential information and remotely execute arbitrary code.

Multiple buffer overflow vulnerabilities exist when the PLC Editor Version 1.3.5_20190129 processes project files. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

PLC Editor Versions 1.3.8 and prior is vulnerable to a stack-based buffer overflow while processing project files, which may allow an attacker to execute arbitrary code.

A Stack-Based Buffer Overflow issue was discovered in Wecon Technologies LEVI Studio HMI Editor before 1.8.1. This vulnerability causes a buffer overflow, which could result in denial of service when a malicious project file is run on the system.

Processing specially crafted .pm3 files in Advantech WebAccess HMI Designer 2.1.7.32 and prior may cause the system to write outside the intended buffer area and may allow remote code execution.

Eaton 9000X DriveA versions 2.0.29 and prior has a stack-based buffer overflow vulnerability, which may allow remote code execution.

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause a heap-based buffer overflow.

Parsing malformed project files in Omron CX-One versions 4.42 and prior, including the following applications: CX-FLnet versions 1.00 and prior, CX-Protocol versions 1.992 and prior, CX-Programmer versions 9.65 and prior, CX-Server versions 5.0.22 and prior, Network Configurator versions 3.63 and prior, and Switch Box Utility versions 1.68 and prior, may cause a stack-based buffer overflow.

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause an out of bounds vulnerability.

gpsd versions 2.90 to 3.17 and microjson versions 1.0 to 1.3, an open source project, allow a stack-based buffer overflow, which may allow remote attackers to execute arbitrary code on embedded platforms via traffic on Port 2947/TCP or crafted JSON inputs.

WECON Technology Co., Ltd. PI Studio HMI versions 4.1.9 and prior and PI Studio versions 4.2.34 and prior have a stack-based buffer overflow vulnerability which may allow remote code execution.

IntelliVue Patient Monitors MP Series (including MP2/X2/MP30/MP50/MP70/NP90/MX700/800) Rev B-M, IntelliVue Patient Monitors MX (MX400-550) Rev J-M and (X3/MX100 for Rev M only), and Avalon Fetal/Maternal Monitors FM20/FM30/FM40/FM50 with software Revisions F.0, G.0 and J.3 have a vulnerability that allows an unauthenticated attacker to access memory ("write-what-where") from an attacker-chosen device address within the same subnet.

IntelliVue Patient Monitors MP Series (including MP2/X2/MP30/MP50/MP70/NP90/MX700/800) Rev B-M, IntelliVue Patient Monitors MX (MX400-550) Rev J-M and (X3/MX100 for Rev M only), and Avalon Fetal/Maternal Monitors FM20/FM30/FM40/FM50 with software Revisions F.0, G.0 and J.3 have a vulnerability that exposes an "echo" service, in which an attacker-sent buffer to an attacker-chosen device address within the same subnet is copied to the stack with no boundary checks, hence resulting in stack overflow.

An out-of-bounds vulnerability in LeviStudioU, Versions 1.8.29 and 1.8.44 can be exploited when the application processes specially crafted project files.

An issue was discovered in WECON Technology LEVI Studio HMI Editor v1.8.29 and prior. A specially-crafted malicious file may be able to cause a heap-based buffer overflow vulnerability when opened by a user.

WPLSoft in Delta Electronics versions 2.45.0 and prior utilizes a fixed length heap buffer where a value larger than the buffer can be read from a file into the buffer, causing the buffer to be overwritten, which may allow remote code execution or cause the application to crash.

WPLSoft in Delta Electronics versions 2.45.0 and prior writes data from a file outside the bounds of the intended buffer space, which could cause memory corruption or may allow remote code execution.

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause a stack-based buffer overflow.

Parsing malformed project files in Omron CX-One versions 4.42 and prior, including the following applications: CX-FLnet versions 1.00 and prior, CX-Protocol versions 1.992 and prior, CX-Programmer versions 9.65 and prior, CX-Server versions 5.0.22 and prior, Network Configurator versions 3.63 and prior, and Switch Box Utility versions 1.68 and prior, may cause a heap-based buffer overflow.

WECON PLC Editor Versions 1.3.8 and prior has a heap-based buffer overflow vulnerabilities have been identified that may allow arbitrary code execution.

A stack-based buffer overflow vulnerability has been identified in Teledyne DALSA Sherlock Version 7.2.7.4 and prior, which may allow remote code execution.

WECON PLC Editor Versions 1.3.8 and prior has a stack-based buffer overflow vulnerability has been identified that may allow arbitrary code execution.

A Heap-based Buffer Overflow issue was discovered in WECON LeviStudio HMI. The heap-based buffer overflow vulnerability has been identified, which may allow remote code execution.

Buffer Overflow vulnerability in ExtractorInformation function in streamExtractor.cpp in oggvideotools 0.9.1 allows remaote attackers to run arbitrary code via opening of crafted ogg file.

Measuresoft ScadaPro Server (Versions prior to 6.8.0.1) uses an unmaintained ActiveX control, which may allow an out-of-bounds write condition while processing a specific project file.

A memory corruption issue was addressed with improved input validation. This issue is fixed in iOS 12.1.4. An application may be able to execute arbitrary code with kernel privileges.

Adobe Photoshop versions 22.5.6 (and earlier) and 23.2.2 (and earlier) are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Adobe Acrobat and Reader versions , 2019.012.20040 and earlier, 2017.011.30148 and earlier, 2017.011.30148 and earlier, 2015.006.30503 and earlier, and 2015.006.30503 and earlier have a heap overflow vulnerability. Successful exploitation could lead to arbitrary code execution .

There's a possible overflow in handle_image() when shim tries to load and execute crafted EFI executables; The handle_image() function takes into account the SizeOfRawData field from each section to be loaded. An attacker can leverage this to perform out-of-bound writes into memory. Arbitrary code execution is not discarded in such scenario.

Adobe Acrobat and Reader versions 2019.010.20100 and earlier, 2019.010.20099 and earlier, 2017.011.30140 and earlier, 2017.011.30138 and earlier, 2015.006.30495 and earlier, and 2015.006.30493 and earlier have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution.

Multiple memory corruption issues were addressed with improved memory handling. This issue is fixed in iOS 12.2, tvOS 12.2, watchOS 5.2, Safari 12.1, iTunes 12.9.4 for Windows, iCloud for Windows 7.11. Processing maliciously crafted web content may lead to arbitrary code execution.

The compile_branch function in PCRE before 8.37 allows context-dependent attackers to compile incorrect code, cause a denial of service (out-of-bounds heap read and crash), or possibly have other unspecified impact via a regular expression with a group containing a forward reference repeated a large number of times within a repeated outer group that has a zero minimum quantifier.

Adobe Photoshop CC versions 19.1.8 and earlier and 20.0.5 and earlier have an out of bound write vulnerability. Successful exploitation could lead to arbitrary code execution.

Adobe Acrobat and Reader versions 2019.010.20100 and earlier, 2019.010.20099 and earlier, 2017.011.30140 and earlier, 2017.011.30138 and earlier, 2015.006.30495 and earlier, and 2015.006.30493 and earlier have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution.

Adobe Acrobat and Reader versions 2019.010.20100 and earlier, 2019.010.20099 and earlier, 2017.011.30140 and earlier, 2017.011.30138 and earlier, 2015.006.30495 and earlier, and 2015.006.30493 and earlier have a heap overflow vulnerability. Successful exploitation could lead to arbitrary code execution.

Adobe Framemaker versions 2029u8 (and earlier) and 2020u4 (and earlier) are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.