A vulnerability classified as critical was found in Dahua Smart Park Management up to 20230713. This vulnerability affects unknown code of the file /emap/devicePoint_addImgIco?hasSubsystem=true. The manipulation of the argument upload leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-235162 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Some Dahua products have access control vulnerability in the password reset process. Attackers can exploit this vulnerability through specific deployments to reset device passwords.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

Some Dahua products with Build time before December 2019 have Session ID predictable vulnerabilities. During normal user access, an attacker can use the predicted Session ID to construct a data packet to attack the device.

Dahua DVR 2.608.0000.0 and 2.608.GV00.0 allows remote attackers to bypass authentication and obtain sensitive information including user credentials, change user passwords, clear log files, and perform other actions via a request to TCP port 37777.

Dahua IP camera products using firmware versions prior to V2.400.0000.14.R.20170713 include a version of the Sonia web interface that may be vulnerable to a stack buffer overflow. Dahua IP camera products include an application known as Sonia (/usr/bin/sonia) that provides the web interface and other services for controlling the IP camera remotely. Versions of Sonia included in firmware versions prior to DH_IPC-Consumer-Zi-Themis_Eng_P_V2.408.0000.11.R.20170621 do not validate input data length for the 'password' field of the web interface. A remote, unauthenticated attacker may submit a crafted POST request to the IP camera's Sonia web interface that may lead to out-of-bounds memory operations and loss of availability or remote code execution. The issue was originally identified by the researcher in firmware version DH_IPC-HX1X2X-Themis_EngSpnFrn_N_V2.400.0000.30.R.20160803.

A vulnerability has been found in Dahua products. Attackers can send carefully crafted data packets to the interface with vulnerabilities to initiate device initialization.

A Use of Password Hash Instead of Password for Authentication issue was discovered in Dahua DH-IPC-HDBW23A0RN-ZS, DH-IPC-HDBW13A0SN, DH-IPC-HDW1XXX, DH-IPC-HDW2XXX, DH-IPC-HDW4XXX, DH-IPC-HFW1XXX, DH-IPC-HFW2XXX, DH-IPC-HFW4XXX, DH-SD6CXX, DH-NVR1XXX, DH-HCVR4XXX, DH-HCVR5XXX, DHI-HCVR51A04HE-S3, DHI-HCVR51A08HE-S3, and DHI-HCVR58A32S-S2 devices. The use of password hash instead of password for authentication vulnerability was identified, which could allow a malicious user to bypass authentication without obtaining the actual password.

Some Dahua products have buffer overflow vulnerabilities. After the successful login of the legal account, the attacker sends a specific DDNS test command, which may cause the device to go down.

On Juniper Networks SRX Series with ICAP (Internet Content Adaptation Protocol) redirect service enabled, processing a malformed HTTP message can lead to a Denial of Service (DoS) or Remote Code Execution (RCE) Continued processing of this malformed HTTP message may result in an extended Denial of Service (DoS) condition. The offending HTTP message that causes this issue may originate both from the HTTP server or the HTTP client. This issue affects Juniper Networks Junos OS on SRX Series: 18.1 versions prior to 18.1R3-S9 ; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3; 19.1 versions prior to 19.1R1-S5, 19.1R2; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS prior to 18.1R1.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects RAX40 before 1.0.2.60, RAX35 before 1.0.2.60, R6400v2 before 1.0.4.122, R6700v3 before 1.0.4.122, R6900P before 1.3.3.152, R7000P before 1.3.3.152, R7000 before 1.0.11.136, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

Buffer overflow in pngpread.c in libpng before 1.2.44 and 1.4.x before 1.4.3, as used in progressive applications, might allow remote attackers to execute arbitrary code via a PNG image that triggers an additional data row.

The Nintendo NetworkBuffer class, as used in Animal Crossing: New Horizons before 2.0.6 and other products, allows remote attackers to execute arbitrary code via a large UDP packet that causes a buffer overflow, aka ENLBufferPwn. The victim must join a game session with the attacker. Other affected products include Mario Kart 7 before 1.2, Mario Kart 8, Mario Kart 8 Deluxe before 2.1.0, ARMS before 5.4.1, Splatoon, Splatoon 2 before 5.5.1, Splatoon 3 before late 2022, Super Mario Maker 2 before 3.0.2, and Nintendo Switch Sports before late 2022.

Multiple buffer overflows in the RLE decoder in the rgbimg module in Python 2.5 allow remote attackers to have an unspecified impact via an image file containing crafted data that triggers improper processing within the (1) longimagedata or (2) expandrow function.

In Yokogawa WideField3 R1.01 - R4.03, a buffer overflow could be caused when a user loads a maliciously crafted project file.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request.

Tenda F1203 V2.0.1.6 was discovered to contain a buffer overflow via the page parameter at /goform/VirtualSer.

An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple buffer overflow vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges. (The set of affected scripts is similar to CVE-2020-12266.)

Buffer Overflow Vulnerability in D-Link DIR-825 v1.33.0.44ebdd4-embedded and below allows attacker to execute arbitrary code via the GetConfig method to the /CPE endpoint.

HDF5 Library through 1.14.3 has a heap buffer overflow in H5O__mtime_new_encode in H5Omtime.c.

Stack-based buffer overflow in LoadOFF in bulletphysics bullet3 before 3.26 on all platforms allows remote attackers to execute arbitrary code via a crafted OFF file with an overlong initial token processed by the VHACD test utility or invoked indirectly through PyBullet's vhacd function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the rules parameter in the formIPMacBindAdd function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the picName parameter in the formDelWewifiPic function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the indexSet parameter in the formIPMacBindDel function.

A vulnerability was identified in INSTAR 2K+ and 4K 3.11.1 Build 1124. This affects the function base64_decode of the component fcgi_server. The manipulation of the argument Authorization leads to buffer overflow. It is possible to initiate the attack remotely.

IP-COM M50 V15.11.0.33(10768) was discovered to contain multiple buffer overflows via the pEnable, pLevel, and pModule parameters in the formSetDebugCfg function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the sPortMapIndex parameter in the formDelPortMapping function.

A vulnerability was found in SourceCodester Tourist Reservation System 1.0. It has been declared as critical. This vulnerability affects the function ad_writedata of the file System.cpp. The manipulation of the argument ad_code leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-256282 is the identifier assigned to this vulnerability.

D-Link DIR3060 DIR3060A1_FW111B04.bin is vulnerable to Buffer Overflow.

There is an unauthorized buffer overflow vulnerability in Tenda AX12 v22.03.01.21 _ cn. This vulnerability can cause the web service not to restart or even execute arbitrary code. It is a different vulnerability from CVE-2022-2414.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function form_fast_setting_wifi_set.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function R7WebsSecurityHandler.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function formWifiWpsStart.

Tenda AC18 V15.03.05.05 is vulnerable to Buffer Overflow via function formSetDeviceName.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function fromSetRouteStatic.

A buffer overflow vulnerability in the library of the web server in Zyxel NR7101 firmware prior to V1.15(ACCC.3)C0, which could allow an unauthenticated attacker to execute some OS commands or to cause denial-of-service (DoS) conditions on a vulnerable device.

AVS Audio Converter 10.3 is vulnerable to Buffer Overflow.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function addWifiMacFilter.

Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine. The `concat` built-in can write over the bounds of the memory buffer that was allocated for it and thus overwrite existing valid data. The root cause is that the `build_IR` for `concat` doesn't properly adhere to the API of copy functions (for `>=0.3.2` the `copy_bytes` function). A contract search was performed and no vulnerable contracts were found in production. The buffer overflow can result in the change of semantics of the contract. The overflow is length-dependent and thus it might go unnoticed during contract testing. However, certainly not all usages of concat will result in overwritten valid data as we require it to be in an internal function and close to the return statement where other memory allocations don't occur. This issue has been addressed in 0.4.0.

HCL Domino is susceptible to a Buffer Overflow vulnerability in DXL due to improper validation of user input. A successful exploit could enable an attacker to crash Domino or execute attacker-controlled code on the server system.

A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions < IP8), Cerberus PRO EN Fire Panel FC72x IP6 (All versions < IP6 SR3), Cerberus PRO EN Fire Panel FC72x IP7 (All versions < IP7 SR5), Cerberus PRO EN X200 Cloud Distribution IP7 (All versions < V3.0.6602), Cerberus PRO EN X200 Cloud Distribution IP8 (All versions < V4.0.5016), Cerberus PRO EN X300 Cloud Distribution IP7 (All versions < V3.2.6601), Cerberus PRO EN X300 Cloud Distribution IP8 (All versions < V4.2.5015), Cerberus PRO UL Compact Panel FC922/924 (All versions < MP4), Cerberus PRO UL Engineering Tool (All versions < MP4), Cerberus PRO UL X300 Cloud Distribution (All versions < V4.3.0001), Desigo Fire Safety UL Compact Panel FC2025/2050 (All versions < MP4), Desigo Fire Safety UL Engineering Tool (All versions < MP4), Desigo Fire Safety UL X300 Cloud Distribution (All versions < V4.3.0001), Sinteso FS20 EN Engineering Tool (All versions < MP8), Sinteso FS20 EN Fire Panel FC20 MP6 (All versions < MP6 SR3), Sinteso FS20 EN Fire Panel FC20 MP7 (All versions < MP7 SR5), Sinteso FS20 EN X200 Cloud Distribution MP7 (All versions < V3.0.6602), Sinteso FS20 EN X200 Cloud Distribution MP8 (All versions < V4.0.5016), Sinteso FS20 EN X300 Cloud Distribution MP7 (All versions < V3.2.6601), Sinteso FS20 EN X300 Cloud Distribution MP8 (All versions < V4.2.5015), Sinteso Mobile (All versions < V3.0.0). The network communication library in affected systems does not validate the length of certain X.509 certificate attributes which might result in a stack-based buffer overflow. This could allow an unauthenticated remote attacker to execute code on the underlying operating system with root privileges.

Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no static dhcp mac WORD (WORD|null) ip A.B.C.D hostname (WORD|null) description (WORD|null)' command template.

Memory corruption while processing Codec2 during v13k decoder pitch synthesis.