Authentication vulnerability found in Dahua NVR models NVR50XX, NVR52XX, NVR54XX, NVR58XX with software before DH_NVR5xxx_Eng_P_V2.616.0000.0.R.20171102. Attacker could exploit this vulnerability to gain access to additional operations by means of forging json message.
A vulnerability has been found in Dahua products.After obtaining the administrator's username and password, the attacker can send a carefully crafted data packet to the interface with vulnerabilities, causing device initialization.
Some of Dahua's Debug functions do not have permission separation. Low-privileged users can use the Debug function after logging in. Affected products include: IPC-HDW1X2X,IPC-HFW1X2X,IPC-HDW2X2X,IPC-HFW2X2X,IPC-HDW4X2X,IPC-HFW4X2X,IPC-HDBW4X2X,IPC-HDW5X2X,IPC-HFW5X2X for versions which Build time is before August 18,2019.
A vulnerability classified as critical was found in Dahua Smart Park Management up to 20230713. This vulnerability affects unknown code of the file /emap/devicePoint_addImgIco?hasSubsystem=true. The manipulation of the argument upload leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-235162 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Some Dahua software products have a vulnerability of unrestricted upload of file. After obtaining the permissions of administrators, by sending a specific crafted packet to the vulnerable interface, an attacker can upload arbitrary files.
The specific fields of CGI interface of some Dahua products are not strictly verified, an attacker can cause a buffer overflow by constructing malicious packets. Affected products include: IPC-HDW1X2X,IPC-HFW1X2X,IPC-HDW2X2X,IPC-HFW2X2X,IPC-HDW4X2X,IPC-HFW4X2X,IPC-HDBW4X2X,IPC-HDW5X2X,IPC-HFW5X2X for versions which Build time is before August 18, 2019.
A vulnerability has been found in UTT HiPER 810G up to 1.7.7-1711. Impacted is the function strcpy of the file /goform/setSysAdm. The manipulation of the argument passwd1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A weakness has been identified in UTT HiPER 810G up to 1.7.7-171114. This issue affects the function strcpy of the file /goform/ConfigExceptMSN. Executing a manipulation of the argument remark can lead to buffer overflow. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.
A flaw has been found in Totolink N300RT 3.4.0-B20250430. This affects an unknown function of the file /boafrm/formIpQoS. Executing a manipulation of the argument entry_name can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used.
A vulnerability has been found in D-Link DI-8100 16.07.26A1. Affected by this issue is the function file_exten_asp of the file file_exten.asp of the component File Extension Handler. The manipulation of the argument Name leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.
TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the httpRemotePort parameter.
A buffer overflow vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A stack-based buffer overflow in the Start_EPI function within the httpd binary allows an authenticated attacker with administrator privileges to execute arbitrary commands on the underlying Linux operating system as root. This vulnerablity can be triggered over the network via a malicious POST request to /apply.cgi.
A specially crafted TCP/IP packet may cause the camera recovery image web interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.
Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off) options WORD' command template.
Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off)' command template.
Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn l2tp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> auth (on|off) password (WORD|null)' command template.
Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off)' command template.
Buffer overflow vulnerability in Nintendo Wi-Fi Network Adaptor WAP-001 All versions allows an attacker with an administrative privilege to execute arbitrary code via unspecified vectors.
Skyworth Digital Technology RN510 V.3.1.0.4 RN510 V.3.1.0.4 contains a buffer overflow vulnerability in /cgi-bin/app-staticIP.asp. An authenticated attacker can send a specially crafted request to endpoint which can lead to a denial of service (DoS) or possible code execution on the device.
A specially crafted TCP/IP packet may cause a camera recovery image telnet interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.
Jenkins WMI Windows Agents Plugin 1.8 and earlier includes the Windows Remote Command library which has a buffer overflow vulnerability that may allow users able to connect to a named pipe to execute commands on the Windows agent machine.
A vulnerability has been found in D-Link DI-8100 16.07.26A1. This vulnerability affects the function sprintf of the file /user_group.asp of the component CGI Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the minAddress parameter.
TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the X_TP_ClonedMACAddress parameter.
Multiple buffer overflow vulnerabilities exist in the internet.cgi set_qos() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability exists in the `en_enable` POST parameter.
A buffer overflow vulnerability exists in the adm.cgi set_sys_adm() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
Multiple buffer overflow vulnerabilities exist in the qos.cgi qos_settings() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A buffer overflow vulnerability exists in the `qos_dat` POST parameter.
Multiple buffer overflow vulnerabilities exist in the qos.cgi qos_settings() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A buffer overflow vulnerability exists in the `sel_mode` POST parameter.
A flaw has been found in D-Link DI-8100 16.07.26A1. This affects an unknown part of the file /url_member.asp of the component Web Management Interface. Executing a manipulation of the argument Name can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can cause a buffer overflow.
A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.
Multiple buffer overflow vulnerabilities exist in the internet.cgi set_qos() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability exists in the `cli_name` POST parameter.
A buffer overflow vulnerability exists in the adm.cgi set_wzdgw4G() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A buffer overflow vulnerability exists in the qos.cgi qos_sta_settings() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A buffer overflow vulnerability exists in the adm.cgi rep_as_router() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A buffer overflow vulnerability exists in the adm.cgi set_wzap() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
An arbitrary code execution vulnerability exists in the adm.cgi set_MeshAp() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A buffer overflow vulnerability exists in the internet.cgi set_add_routing() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A security vulnerability has been detected in H3C Magic B3 up to 100R002. This affects the function UpdateWanParams of the file /goform/aspForm. Such manipulation of the argument param leads to buffer overflow. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A buffer overflow vulnerability exists in the adm.cgi rep_as_bridge() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
A buffer overflow vulnerability exists in the adm.cgi set_TR069() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an authenticated HTTP request to trigger this vulnerability.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute code. We have already fixed the vulnerability in the following versions: QTS 5.2.1.2930 build 20241025 and later QuTS hero h5.2.1.2929 build 20241025 and later
A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute code. We have already fixed the vulnerability in the following versions: QTS 5.2.1.2930 build 20241025 and later QuTS hero h5.2.1.2929 build 20241025 and later
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.