In CODESYS V2 PLCWinNT and Runtime Toolkit 32 in versions prior to V2.4.7.57 password protection is not enabled by default and there is no information or prompt to enable password protection at login in case no password is set at the controller.

A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.6, macOS Sonoma 14.7.7, macOS Ventura 13.7.7. An app may be able to break out of its sandbox.

When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.

The iaware module has a vulnerability in thread security. Successful exploitation of this vulnerability will affect confidentiality, integrity, and availability.

The CS5000 Fire Panel is vulnerable due to a default account that exists on the panel. Even though it is possible to change this by SSHing into the device, it has remained unchanged on every installed system observed. This account is not root but holds high-level permissions that could severely impact the device's operation if exploited.

OvalEdge 5.2.8.0 and earlier is affected by an Account Takeover vulnerability via a POST request to /profile/updateProfile via the userId and email parameters. Authentication is required.

Panasonic P110, Eluga Z1 Pro, Eluga X1, and Eluga X1 Pro devices through 2020-04-10 have Insecure Permissions. NOTE: the vendor states that all affected products are at "End-of-software-support."

parcimonie before 0.8.1, when using a large keyring, sleeps for the same amount of time between fetches, which allows attackers to correlate key fetches via unspecified vectors.

A permissions issue was addressed with improved validation. This issue is fixed in macOS Ventura 13.7.5, iPadOS 17.7.6, macOS Sequoia 15.4, macOS Sonoma 14.7.5. A shortcut may be able to access files that are normally inaccessible to the Shortcuts app.

The defaults settings for the CORS filter provided in Apache Tomcat 9.0.0.M1 to 9.0.8, 8.5.0 to 8.5.31, 8.0.0.RC1 to 8.0.52, 7.0.41 to 7.0.88 are insecure and enable 'supportsCredentials' for all origins. It is expected that users of the CORS filter will have configured it appropriately for their environment rather than using it in the default configuration. Therefore, it is expected that most users will not be impacted by this issue.

A race condition was addressed with improved locking. This issue is fixed in macOS Ventura 13.7.5, macOS Sequoia 15.4, macOS Sonoma 14.7.5. Mounting a maliciously crafted SMB network share may lead to system termination.

Airleader Master <= 6.21 devices have default credentials that can be used to access the exposed Tomcat Manager for deployment of a new .war file, with resultant remote code execution.

Nagios XI before 5.8.5 has Incorrect Permission Assignment for migrate.php.

pdns specific as packaged in Debian in version before 3.3.1-1 creates a too privileged MySQL user. It was discovered that the maintainer scripts of pdns-backend-mysql grant too wide database permissions for the pdns user. Other backends are not affected.

Use of default credentials for the telnet server in BASETech GE-131 BT-1837836 firmware 20180921 allows remote attackers to execute arbitrary system commands as the root user.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Symbolic Links For Unprivileged File Interaction V-2022-002.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 1.0.735 Application 20.0.1330 allows Insecure Log Permissions V-2022-005.

The default configuration of broker.conf in Red Hat OpenShift Enterprise 2.x before 2.1 has a password of "mooo" for a Mongo account, which allows remote attackers to hijack the broker by providing this password, related to the openshift.sh script in Openshift Extras before 20130920. NOTE: this may overlap CVE-2013-4253 and CVE-2013-4281.

HTTP Response Manipulation in SCRIPT CASE v.1.0.002 Build7 allows a remote attacker to escalate privileges via a crafted request.

Gradle Enterprise before 2022.1 allows remote code execution if the installation process did not specify an initial configuration file. The configuration allows certain anonymous access to administration and an API.

A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Ventura 13.7.5, macOS Sequoia 15.4, macOS Sonoma 14.7.5. An app may be able to enable iCloud storage features without user consent.

A permissions issue was addressed with additional sandbox restrictions. This issue is fixed in macOS Ventura 13.7.5, macOS Sequoia 15.4, macOS Sonoma 14.7.5. "Block All Remote Content" may not apply for all mail previews.

A logic issue was addressed with improved checks. This issue is fixed in macOS Ventura 13.7.5, tvOS 18.4, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, macOS Sonoma 14.7.5. An app may be able to gain elevated privileges.

Race condition in Google Chrome before 25.0.1364.152 allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the handling of media threads.

An integer overflow was addressed with improved input validation. This issue is fixed in macOS Ventura 13.7.5, macOS Sequoia 15.4, macOS Sonoma 14.7.5. A user may be able to elevate privileges.

A privilege escalation vulnerability is identified in Ivanti EPM (LANDesk Management Suite) that allows a user to execute commands with elevated privileges.

A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Ventura 13.7.3, macOS Sonoma 14.7.3. An app may be able to access removable volumes without user consent.

Authentication bypass for the Open AMT Cloud Toolkit software maintained by Intel(R) before versions 2.0.2 and 2.2.2 may allow an unauthenticated user to potentially enable escalation of privilege via network access.

A condition exists in FlashArray Purity whereby a local account intended for initial array configuration remains active potentially allowing a malicious actor to gain elevated privileges.

In Apache CouchDB prior to 3.2.2, an attacker can access an improperly secured default installation without authenticating and gain admin privileges. The CouchDB documentation has always made recommendations for properly securing an installation, including recommending using a firewall in front of all CouchDB installations.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

It was discovered, that debian-edu-config, a set of configuration files used for the Debian Edu blend, before 2.12.16 configured insecure permissions for the user web shares (~/public_html), which could result in privilege escalation.

A vulnerability in the use of JSON web tokens by the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to gain administrative access to an affected system. The vulnerability is due to the presence of static default credentials for the web-based service portal of the affected software. An attacker could exploit this vulnerability by extracting the credentials from an image of the affected software and using those credentials to generate a valid administrative session token for the web-based service portal of any other installation of the affected software. A successful exploit could allow the attacker to gain administrative access to the web-based service portal of an affected system. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg30884.

An issue was discovered in Schneider Electric Wonderware Historian 2014 R2 SP1 P01 and earlier. Wonderware Historian creates logins with default passwords, which can allow a malicious entity to compromise Historian databases. In some installation scenarios, resources beyond those created by Wonderware Historian may be compromised as well.

During installation of Ambari 2.4.0 through 2.4.2, Ambari Server artifacts are not created with proper ACLs.

The previous default setting for Airflow's Experimental API was to allow all API requests without authentication, but this poses security risks to users who miss this fact. From Airflow 1.10.11 the default has been changed to deny all requests by default and is documented at https://airflow.apache.org/docs/1.10.11/security.html#api-authentication. Note this change fixes it for new installs but existing users need to change their config to default `[api]auth_backend = airflow.api.auth.backend.deny_all` as mentioned in the Updating Guide: https://github.com/apache/airflow/blob/1.10.11/UPDATING.md#experimental-api-will-deny-all-request-by-default

The Versa Director software exposes a number of services by default and allow attackers an easy foothold due to default credentials and multiple accounts (most with sudo access) that utilize the same default credentials. By default, Versa director exposes ssh and postgres to the internet, alongside a host of other services. Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers. Workarounds or Mitigation: Versa recommends the following security controls: 1) Change default passwords to complex passwords 2) Passwords must be complex with at least 8 characters that comprise of upper case, and lower case alphabets, as well as at at least one digit, and one special character 3) Passwords must be changed at least every 90 days 4) Password change history is checked to ensure that the at least the last 5 passwords must be used when changing password. 5) Review and audit logs for all authentication attempts to check for unauthorized/suspicious login attempts and enforce remediation steps.

Multiple Mitsubishi Electric Factory Automation engineering software products have a malicious code execution vulnerability. A malicious attacker could use this vulnerability to obtain information, modify information, and cause a denial-of-service condition.

Lansweeper 6.0.x through 7.2.x has a default installation in which the admin password is configured for the admin account, unless "Built-in admin" is manually unchecked. This allows command execution via the Add New Package and Scheduled Deployments features.

CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could cause an attacker to execute unauthorized commands when a system’s default password credentials have not been changed on first use. The default username is not displayed correctly in the WebHMI interface.

This issue was addressed with improved state management. This issue is fixed in macOS Ventura 13.3, Safari 16.4, iOS 16.4 and iPadOS 16.4, iOS 15.7.4 and iPadOS 15.7.4, tvOS 16.4. A remote user may be able to cause unexpected app termination or arbitrary code execution.

TSplus Remote Work 16.0.0.0 has weak permissions for .exe, .js, and .html files under the %PROGRAMFILES(X86)%\TSplus-RemoteWork\Clients\www folder. This may enable privilege escalation if a different local user modifies a file. NOTE: CVE-2023-31067 and CVE-2023-31068 are only about the TSplus Remote Access product, not the TSplus Remote Work product.

In Gotenberg through 6.2.1, insecure permissions for tini (writable by user gotenberg) potentially allow an attacker to overwrite the file, which can lead to denial of service or code execution.

eQ-3 Homematic Central Control Unit (CCU)2 through 2.51.6 and CCU3 through 3.51.6 allow Remote Code Execution in the JSON API Method ReGa.runScript, by unauthenticated attackers with access to the web interface, due to the default auto-login feature being enabled during first-time setup (or factory reset).

Zoho ManageEngine DataSecurity Plus prior to 6.0.1 uses default admin credentials to communicate with a DataEngine Xnode server. This allows an attacker to bypass authentication for this server and execute all operations in the context of admin user.

Marval MSM through 14.19.0.12476 and 15.0 has a System account with default credentials. A remote attacker is able to login and create a valid session. This makes it possible to make backend calls to endpoints in the application.

WAVLINK WN531P3 202383 was discovered to contain a hardcoded password vulnerability in /etc/shadow, which allows attackers to log in as root.

TeleAdapt RoomCast TA-2400 1.0 through 3.1 is vulnerable to Improper Privilege Management: from the shell available after an adb connection, simply entering the su command provides root access (without requiring a password).

An issue was discovered in TSplus Remote Access through 16.0.2.14. There are Full Control permissions for Everyone on some directories under %PROGRAMFILES(X86)%\TSplus\Clients\www.