A vulnerability classified as critical was found in D-Link DIR-880L up to 104WWb01. Affected by this vulnerability is the function sub_16570 of the file /htdocs/ssdpcgi of the component Request Header Handler. The manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later)

An authenticated attacker can execute arbitrary code using command ejection in Eltex ESP-200 firmware version 1.2.0.

rubygem-openshift-origin-console in Red Hat OpenShift 2.2 allows remote authenticated users to execute arbitrary commands via a crafted request to the Broker.

Watchguard XCS 9.2 and 10.0 before build 150522 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the id parameter to ADMIN/mailqueue.spl.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.

A vulnerability in the web-based management interface of Cisco Cloud Services Platform 2100 could allow an authenticated, remote attacker to perform command injection. The vulnerability is due to insufficient input validation of command input. An attacker could exploit this vulnerability by sending customized commands to the web-based management interface.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

cloner.functions.php in the XCloner plugin 3.1.2 for WordPress allows remote authenticated users to execute arbitrary commands via a file containing filenames with shell metacharacters, as demonstrated by using the backup comments feature to create the file.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.

A vulnerability has been found in dst-admin 1.5.0 and classified as critical. This vulnerability affects unknown code of the file /home/sendBroadcast. The manipulation of the argument message leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220036.

The asset discovery scanner in AlienVault OSSIM before 5.0.1 allows remote authenticated users to execute arbitrary commands via the assets array parameter to netscan/do_scan.php.

Huawei iManager NetEco with software V600R008C00 and V600R008C10 has a command injection vulnerability. An authenticated, remote attacker could exploit this vulnerability to send malicious packets to a target device. Successful exploit could enable a low privileged user to execute commands that a high privileged user could execute, causing the files to be tampered with or deleted.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new port forwarding rules to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "system" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_43C280in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "ip_address" is extracted at address 0x0043C2F0. The POST parameter "ipaddress" is concatenated at address 0x0043C958 and this is passed to a "system" function at address 0x00437284. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

FusionSphere OpenStack V100R006C00SPC102(NFV)has a command injection vulnerability. Due to lack of validation, an attacker with high privilege may inject malicious code into some module of the affected products, causing code execution.

A vulnerability, which was classified as critical, was found in dst-admin 1.5.0. This affects an unknown part of the file /home/masterConsole. The manipulation of the argument command leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-220035.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in ngpsystemcmd.php in which the http parameters "x_modules" and "y_modules" are not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

Dell EMC iDRAC7/iDRAC8, versions prior to 2.60.60.60, and iDRAC9 versions prior to 3.21.21.21 contain a command injection vulnerability in the SNMP agent. A remote authenticated malicious iDRAC user with configuration privileges could potentially exploit this vulnerability to execute arbitrary commands on the iDRAC where SNMP alerting is enabled.

A vulnerability classified as critical was found in TOTOLINK A6000R 1.0.1-B20201211.2000. Affected by this vulnerability is the function apcli_cancel_wps of the file /usr/lib/lua/luci/controller/mtkwifi.lua. The manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

The network diagnostics tool (CommandLineServlet) in the Appliance Manager command line utility (CLU) in Websense TRITON 7.8.3 and V-Series appliances before 7.8.4 Hotfix 02 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the "second" parameter of a command, as demonstrated by the Destination parameter in the ping command.

The escape_command function in include/Administration/corePerformance/getStats.php in Centreon (formerly Merethis Centreon) 2.5.4 and earlier (fixed in Centreon 19.10.0) uses an incorrect regular expression, which allows remote authenticated users to execute arbitrary commands via shell metacharacters in the ns_id parameter.

Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

The API endpoints in Ironman PowerShell Universal 3.0.0 through 4.2.0 allow remote attackers to execute arbitrary commands via crafted HTTP requests if a param block is used, due to invalid sanitization of input strings. The fixed versions are 3.10.2, 4.1.10, and 4.2.1.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

Common LaTeX Service Interface (CLSI) before 0.1.3, as used in ShareLaTeX before 0.1.3, allows remote authenticated users to execute arbitrary code via ` (backtick) characters in a filename.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

An improper neutralization of special elements used in a command ('Command Injection') vulnerability [CWE-77] in FortiPortal version 7.2.0, version 7.0.6 and below may allow a remote authenticated attacker with at least R/W permission to execute unauthorized commands via specifically crafted arguments in the Schedule System Backup page field.

Mingyu Security Gateway before v3.0-5.3p was discovered to contain a remote command execution (RCE) vulnerability via the log_type parameter at /log/fw_security.mds.

A vulnerability in the vManage dashboard for the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69974.

An issue was discovered in Relyum RELY-PCIe 22.2.1 and RELY-REC 23.1.0 devices, allowing authenticated command injection through the web interface.

includes/configure_client.php in RaspAP 2.6.6 allows attackers to execute commands via command injection.

IBM Curam Social Program Management 6.0 SP2 before EP26, 6.0.4 before 6.0.4.5iFix10 and 6.0.5 before 6.0.5.6 allows remote authenticated users to load arbitrary Java classes via unspecified vectors.

An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later

Bugzilla before 4.0.16, 4.1.x and 4.2.x before 4.2.12, 4.3.x and 4.4.x before 4.4.7, and 5.x before 5.0rc1 allows remote authenticated users to execute arbitrary commands by leveraging the editcomponents privilege and triggering crafted input to a two-argument Perl open call, as demonstrated by shell metacharacters in a product name.

The management console on the Symantec Web Gateway (SWG) appliance before 5.2.2 allows remote authenticated users to execute arbitrary OS commands by injecting command strings into unspecified PHP scripts.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's interface responsible for generating reports was vulnerable to remote command injection via the token parameter, aka NSWA-1303.

China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRMesh/set_ZRMesh which receives parameters by POST request, and the parameter mesh_enable and mesh_device have a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's configuration utilities for adding (and detecting) Active Directory servers was vulnerable to remote command injection, aka NSWA-1314.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

The Symantec Messaging Gateway before 10.6.3-267 can encounter an issue of remote code execution, which describes a situation whereby an individual may obtain the ability to execute commands remotely on a target machine or in a target process. In this type of occurrence, after gaining access to the system, the attacker may attempt to elevate their privileges.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access, via dtb pages of the platform portal. This is also known as OSFOURK-23719.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.1, 4000 Assistant V10 R0, 4000 Manager V10 R1 before V10 R1.42.1, and 4000 Manager V10 R0 allow Authenticated Command Injection via AShbr. This is also known as OSFOURK-24039.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230807. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237517 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue in ZenTao Community Edition v.18.6 and before, ZenTao Biz v.8.6 and before, ZenTao Max v.4.7 and before allows an attacker to execute arbitrary code via a crafted script to the Office Conversion Settings function.