An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "popen" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "dest" is extracted at address 0x00420FC4. The POST parameter "dest is concatenated in a route add command and this is passed to a "popen" function at address 0x00421220. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of blocking key words passing in the web traffic to prevent kids from watching content that might be deemed unsafe using the web management interface. It seems that the device does not implement any cross-site scripting protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a stored cross-site scripting payload on the user's browser and execute any action on the device provided by the web management interface.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in overflowing the stack set up and allow an attacker to control the $ra register stored on the stack. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request. The POST parameter "gateway" allows to overflow the stack and control the $ra register after 1546 characters. The value from this post parameter is then copied on the stack at address 0x00421348 as shown below. This allows an attacker to provide the payload of his/her choice and finally take control of the device.

Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A vulnerability classified as critical was found in TOTOLINK T6 4.1.5cu.748. This vulnerability affects the function ckeckKeepAlive of the file wireless.so of the component MQTT Packet Handler. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Caton Live up to 2023-04-26 and classified as critical. This issue affects some unknown processing of the file /cgi-bin/ping.cgi of the component Mini_HTTPD. The manipulation of the argument address with the input ;id;uname${IFS}-a leads to command injection. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-228911. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Weaver E-Office 9.5 and classified as critical. Affected by this issue is some unknown functionality of the file /webroot/inc/utility_all.php of the component File Upload Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-228776. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

A vulnerability in the vManage dashboard for the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69974.

A vulnerability has been found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6 and classified as critical. This vulnerability affects unknown code of the component Web Management Interface. The manipulation of the argument ecn-down leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-227650 is the identifier assigned to this vulnerability.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component Web Management Interface. The manipulation of the argument name leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227653 was assigned to this vulnerability.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been classified as critical. Affected is an unknown function of the component Web Management Interface. The manipulation of the argument dpi leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-227652.

Sourcetree for Windows had several argument and command injection bugs in Mercurial and Git repository handling. An attacker with permission to commit to a repository linked in Sourcetree for Windows is able to exploit this issue to gain code execution on the system. From version 0.8.4b of Sourcetree for Windows, this vulnerability can be triggered from a webpage through the use of the Sourcetree URI handler. Versions of Sourcetree for Windows starting with 0.5.1.0 before version 2.4.7.0 are affected by this vulnerability

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. This affects an unknown part of the component Web Management Interface. The manipulation of the argument ecn-up leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227649 was assigned to this vulnerability.

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6 and classified as critical. This issue affects some unknown processing of the component Web Management Interface. The manipulation of the argument src leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-227651.

A vulnerability was found in Ubiquiti EdgeRouter X up to 2.0.9-hotfix.6. It has been rated as critical. Affected by this issue is some unknown functionality of the component Web Management Interface. The manipulation of the argument suffix-rate-up leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-227654 is the identifier assigned to this vulnerability.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been classified as critical. This affects the function RP_checkCredentialsByBBS of the file /goform/RP_checkCredentialsByBBS. The manipulation of the argument pwd leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in ngpsystemcmd.php in which the http parameters "x_modules" and "y_modules" are not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

Command Injection in PHPMyWind v5.6 allows remote attackers to execute arbitrary code via the "text color" field of the component '/admin/web_config.php'.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

A vulnerability was found in HadSky up to 7.11.8. It has been declared as critical. This vulnerability affects unknown code of the file /install/index.php of the component Installation Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-224242 is the identifier assigned to this vulnerability.

Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

A vulnerability was determined in Telesquare TLR-2005KSH 1.2.4. The affected element is an unknown function of the file /cgi-bin/internet.cgi?Command=lanCfg. Executing manipulation of the argument Hostname can lead to command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in dst-admin 1.5.0. Affected by this issue is some unknown functionality of the file /home/kickPlayer. The manipulation of the argument userId leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-220034 is the identifier assigned to this vulnerability.

Sourcetree for macOS had several argument and command injection bugs in Mercurial and Git repository handling. An attacker with permission to commit to a repository linked in Sourcetree for macOS is able to exploit this issue to gain code execution on the system. From version 1.4.0 of Sourcetree for macOS, this vulnerability can be triggered from a webpage through the use of the Sourcetree URI handler. Versions of Sourcetree for macOS starting with 1.0b2 before version 2.7.0 are affected by this vulnerability.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

A vulnerability, which was classified as critical, was found in dst-admin 1.5.0. This affects an unknown part of the file /home/masterConsole. The manipulation of the argument command leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-220035.

A vulnerability classified as critical has been found in EasyNAS 1.1.0. Affected is the function system of the file /backup.pl. The manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A vulnerability classified as critical was found in dst-admin 1.5.0. Affected by this vulnerability is an unknown functionality of the file /home/cavesConsole. The manipulation of the argument command leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-220033 was assigned to this vulnerability.

A vulnerability has been found in Tenda FH1205 2.0.0.7(775) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258295. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

A Remote Arbitrary Code Execution vulnerability in HPE Smart Storage Administrator version before v2.60.18.0 was found.

Proxy command injection vulnerabilities in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.

Command inject in transfer from another server in extplorer 2.1.9 and prior allows attacker to inject command via the userfile[0] parameter.

A vulnerability has been found in Tenda FH1203 2.0.1.6 and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-258160. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

Command injection vulnerability in EZ-Internet in Synology Router Manager (SRM) before 1.1.6-6931 allows remote authenticated users to execute arbitrary command via the username parameter.

Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "T" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4745.

A vulnerability has been found in dst-admin 1.5.0 and classified as critical. This vulnerability affects unknown code of the file /home/sendBroadcast. The manipulation of the argument message leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220036.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setDFSSetting of the file /goform/setLan. The manipulation of the argument lanNetmask/lanIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in D-Link DIR‑817L up to 1.04B01. This affects the function lxmldbc_system of the file ssdpcgi. The manipulation leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TRENDnet TEW-652BRP 3.04B01. This issue affects some unknown processing of the file get_set.ccp of the component Web Management Interface. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-219935.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Pivotal Greenplum before 4.3.10.0. Creation of external tables using GPHDFS protocol has a vulnerability whereby arbitrary commands can be injected into the system. In order to exploit this vulnerability the user must have superuser 'gpadmin' access to the system or have been granted GPHDFS protocol permissions in order to create a GPHDFS external table.