u'Buffer overflow while processing a crafted PDU data packet in bluetooth due to lack of check of buffer size before copying' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, QCN7606, SA415M, SA515M, SA6155P, SA8155P, SC8180X, SDX55

u'Buffer overflow while processing PDU packet in bluetooth due to lack of check of buffer length before copying into it.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, QCN7606, SA415M, SA515M, SA6155P, SA8155P, SC8180X, SDX55

A buffer overflow vulnerability in the dhcp6 client of systemd allows a malicious dhcp6 server to overwrite heap memory in systemd-networkd. Affected releases are systemd: versions up to and including 239.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business 220 Series Smart Switches. An unauthenticated, adjacent attacker could perform the following: Execute code on the affected device or cause it to reload unexpectedly Cause LLDP database corruption on the affected device For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released firmware updates that address these vulnerabilities.

Huawei smart phones with earlier versions than ELLE-AL00B 9.1.0.222(C00E220R2P1) have a buffer overflow vulnerability. An attacker may intercept and tamper with the packet in the local area network (LAN) to exploit this vulnerability. Successful exploitation may cause the affected phone abnormal.

Heap out-of-bound write vulnerability in Exynos baseband prior to SMR Jun-2023 Release 1 allows remote attacker to execute arbitrary code.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.40, D8500 before 1.0.3.39, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, R6300v2 before 1.0.4.18, R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.22, R6700v3 before 1.0.2.32, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R6900P before 1.0.0.56, R7000P before 1.0.0.56, R7100LG before 1.0.0.42, R7300DST before 1.0.0.54, R7900 before 1.0.1.26, R8300 before 1.0.2.106, R8500 before 1.0.2.106, WN2500RPv2 before 1.0.1.54, and WNR3500Lv2 before 1.2.0.46. NOTE: this may be a result of an incomplete fix for CVE-2017-18864.

The Bluetooth Low Energy implementation on NXP SDK through 2.2.1 for KW41Z devices does not properly restrict the Link Layer payload length, allowing attackers in radio range to cause a buffer overflow via a crafted packet.

Buffer overflow in the BMC firmware for Intel(R) Server BoardM10JNP2SB before version EFI BIOS 7215, BMC 8100.01.08 may allow an unauthenticated user to potentially enable an escalation of privilege via adjacent access.

A Buffer Overflow vulnerability in the RSTP server component of Eufy Indoor 2K Indoor Camera allows a local attacker to achieve remote code execution. This issue affects: Eufy Indoor 2K Indoor Camera 2.0.9.3 version and prior versions.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business 220 Series Smart Switches. An unauthenticated, adjacent attacker could perform the following: Execute code on the affected device or cause it to reload unexpectedly Cause LLDP database corruption on the affected device For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released firmware updates that address these vulnerabilities.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SOAP requests. When parsing the SOAPAction header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13512.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) (Broadcom Bluetooth chipsets) software. The Bluetooth UART driver has a buffer overflow. The Samsung ID is SVE-2020-18731 (January 2021).

Wind River VxWorks 6.6 through 6.9 has a Buffer Overflow in the DHCP client component. There is an IPNET security vulnerability: Heap overflow in DHCP Offer/ACK parsing inside ipdhcpc.

Buffer Overflow vulnerability in Tenda AC9 V1.0 through V15.03.05.19(6318), and AC9 V3.0 V15.03.06.42_multi, allows attackers to execute arbitrary code via the urls parameter.

Tenda AC6 v2.0 V15.03.06.50 was discovered to contain a buffer overflow in the function 'formSetPPTPServer'.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability.  The specific flaw exists within the handling of HTTP GET requests. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device.

A vulnerability has been found in SourceCodester Telecom Billing Management System 1.0 and classified as critical. This vulnerability affects the function login. The manipulation of the argument uname leads to buffer overflow. The exploit has been disclosed to the public and may be used.

Actiontec WCB6200Q uh_tcp_recv_header Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21414.

Actiontec WCB6200Q uh_tcp_recv_content Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21410.

Edimax AC1200 Wi-Fi 5 Dual-Band Router BR-6476AC 1.06 is vulnerable to Buffer Overflow via /goform/fromSetLanDhcpsClientbinding.

Edimax AC1200 Wi-Fi 5 Dual-Band Router BR-6476AC 1.06 is vulnerable to Buffer Overflow via /goform/getWifiBasic.

A vulnerability classified as critical has been found in Shanghai Sunfull Automation BACnet Server HMI1002-ARM 2.0.4. This affects an unknown part of the component Message Handler. The manipulation leads to buffer overflow. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263115. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK A3700R v9.1.2u.5822_B20200513 has a buffer overflow vulnerability in the http_host parameter in the loginauth function.

In multiple functions of gl_proc.c, there is a buffer overwrite due to a missing bounds check. This could lead to escalation of privileges in the kernel.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Totolink AC1200 Wireless Dual Band Gigabit Router A3002RU_V3 Firmware V3.0.0-B20230809.1615 is vulnerable to Buffer Overflow. The "boa" program allows attackers to modify the value of the "vwlan_idx" field via "formMultiAP". This can lead to a stack overflow through the "formWlEncrypt" CGI function by constructing malicious HTTP requests and passing a WLAN SSID value exceeding the expected length, potentially resulting in command execution or denial of service attacks.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500v2 before 1.0.3.24, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, and WN3100RPv2 before 1.0.0.56.

Buffer Overflow vulnerability in D-Link DSR-150, DSR-150N, DSR-250, DSR-250N, DSR-500N, DSR-1000N from 3.13 to 3.17B901C allows unauthenticated users to execute remote code execution.

Tenda AC18 V15.03.05.19 was discovered to contain a stack overflow via the funcpara1 parameter in the formSetCfm function.

Buffer Overflow vulnerability in Tenda AC9 V1.0 through V15.03.05.19(6318), and AC9 V3.0 V15.03.06.42_multi, allows attackers to execute arbitrary code via the index parameter.

Buffer overflow in daemon for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of ChargePoint Home Flex charging stations. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SrvrToSmSetAutoChnlListMsg function. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root.